README.openserver
上传用户:xiejiait
上传日期:2007-01-06
资源大小:881k
文件大小:3k
- CDRTOOLS compiles without changes on any SCO OpenServer 5.0.4
- or later installation having the SCO DevSys or GCC-2.95 and
- smake-1.2a04 or later installed.
- You can get pre-packaged, custom installable binaries from:
-
- http://www.sco.com/skunkware/cdrtools
-
- Some general notes on CDRTOOLS are available from:
- http://www.sco.com/skunkware/cdrtools/SCO-NOTES.html
- Limitations for CDRTOOLS-1.8 on SCO OpenServer 5:
- 1) SCO OpenServer 5.0.0 and 5.0.2 are unsupported!
-
- 2) There is only support for SCSI devices
- 3) There no support for AHA 154X scsi controllers
- ===================================================================
- NOTE: cdrecord now supports the -scanbus option. Therefore the
- old addressing methods are NO LONGER AVAILABLE !!!
- ===================================================================
-
- As there is no real generic SCSI driver, cdrecord uses the pass through
- ioctl of the cdrom target driver (Srom).
- The correct dev= syntax on SCO Openserver 5 is:
- dev=scsibus,target,lun (and scsibus is scsibus now!!!)
- A sample output from cdrecord -scanbus looks like:
- #cdrecord -scanbus
- Cdrecord 1.8 (i686-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 J鰎g Schilling
- Using libscg version 'schily-0.1'
- scsibus0:
- 0,0,0 0) 'SEAGATE ' 'ST34573LC ' '5960' Disk
- 0,1,0 1) 'SEAGATE ' 'ST34573LC ' '5960' Disk
- 0,2,0 2) 'SEAGATE ' 'ST34573LC ' '5960' Disk
- 0,3,0 3) *
- 0,4,0 4) *
- 0,5,0 5) 'PIONEER ' 'CD-ROM DR-U06S ' '1.05' Removable CD-ROM
- 0,6,0 6) 'TEAC ' 'CD-R56S ' '1.0E' Removable CD-ROM
- 0,7,0 7) *
- The first column showing the triple x,y,z tells you the address to use.
- As you can see the TEAC CD-R56S CD-Writer does have the following address:
- dev=0,6,0
-
- ===================================================================
- THE OLD ADDRESSING IS NO LONGER AVAILABLE!
-
- PLEASE ADJUST YOUR /etc/default/cdrecord FILES!
- ===================================================================
- Running cdrecord with the old address method will result in an error!
- #cdrecord dev=/dev/rcd1:6,0 -inq
- Cdrecord 1.8 (i386-pc-sco3.2v5.0.5) Copyright (C) 1995-2000 J鰎g Schilling
- scsidev: '/dev/rcd1:6,0'
- devname: '/dev/rcd1'
- scsibus: 0 target: 6 lun: 0
- cdrecord: Invalid argument. Open by 'devname' no longer supported on this OS. Cannot open SCSI driver.
- cdrecord: For possible targets try 'cdrecord -scanbus'. Make sure you are root.
- MAKE SURE YOU HAVE MEDIA IN YOUR CD-ROM DEVICES, SO THAT CDRECORD CAN
- OPEN THE DEVICE FOR PASS-THROUGH ACCESS!
- To compile cdrtools, you need 'smake' version 1.2a04 or later from:
- ftp://ftp.sco.com/skunkware/osr5/vols
- Please make sure you use smake-1.2a04 or later, cause smake-1.2 versions
- before a04 will coredump on the compilation of cdrtools on OpenServer.