prjConfig.c
资源名称:ixp425BSP.rar [点击查看]
上传用户:luoyougen
上传日期:2008-05-12
资源大小:23136k
文件大小:15k
源码类别:
VxWorks
开发平台:
C/C++
- /* prjConfig.c - dynamicaly generated configuration file */
- /*
- GENERATED: Mon Nov 18 14:07:23 PST 2002
- DO NOT EDIT - file is regenerated whenever the project changes.
- This file contains the non-BSP system initialization code
- for Create a bootable VxWorks image (custom configured).
- */
- /* includes */
- #include "vxWorks.h"
- #include "config.h"
- #include "bsdSockLib.h"
- #include "bufLib.h"
- #include "cacheLib.h"
- #include "configNet.h"
- #include "cplusLib.h"
- #include "drv/timer/timerDev.h"
- #include "drv/wdb/wdbEndPktDrv.h"
- #include "drv/wdb/wdbVioDrv.h"
- #include "end.h"
- #include "envLib.h"
- #include "eventLib.h"
- #include "excLib.h"
- #include "fioLib.h"
- #include "ftpLib.h"
- #include "hashLib.h"
- #include "hostLib.h"
- #include "intLib.h"
- #include "ioLib.h"
- #include "iosLib.h"
- #include "ipProto.h"
- #include "logLib.h"
- #include "lstLib.h"
- #include "math.h"
- #include "memLib.h"
- #include "msgQLib.h"
- #include "muxLib.h"
- #include "muxTkLib.h"
- #include "net/mbuf.h"
- #include "netBufLib.h"
- #include "netDrv.h"
- #include "netLib.h"
- #include "netinet/if_ether.h"
- #include "pipeDrv.h"
- #include "private/ftpLibP.h"
- #include "private/funcBindP.h"
- #include "private/kernelLibP.h"
- #include "private/taskLibP.h"
- #include "private/vmLibP.h"
- #include "private/workQLibP.h"
- #include "private/wvFileUploadPathLibP.h"
- #include "private/wvTsfsUploadPathLibP.h"
- #include "private/wvUploadPathP.h"
- #include "qPriBMapLib.h"
- #include "rBuffLib.h"
- #include "rebootLib.h"
- #include "remLib.h"
- #include "selectLib.h"
- #include "semLib.h"
- #include "sigLib.h"
- #include "sioLib.h"
- #include "stdio.h"
- #include "string.h"
- #include "symLib.h"
- #include "sys/socket.h"
- #include "sysLib.h"
- #include "taskHookLib.h"
- #include "taskLib.h"
- #include "taskVarLib.h"
- #include "tickLib.h"
- #include "timexLib.h"
- #include "ttyLib.h"
- #include "usrConfig.h"
- #include "version.h"
- #include "vxLib.h"
- #include "wdLib.h"
- #include "wdb/wdb.h"
- #include "wdb/wdbBpLib.h"
- #include "wdb/wdbCommIfLib.h"
- #include "wdb/wdbLib.h"
- #include "wdb/wdbLibP.h"
- #include "wdb/wdbMbufLib.h"
- #include "wdb/wdbRpcLib.h"
- #include "wdb/wdbRtIfLib.h"
- #include "wdb/wdbSvcLib.h"
- #include "wdb/wdbUdpLib.h"
- #include "wdb/wdbVioLib.h"
- #include "wvLib.h"
- #include "wvTmrLib.h"
- /* imports */
- IMPORT char etext []; /* defined by loader */
- IMPORT char end []; /* defined by loader */
- IMPORT char edata []; /* defined by loader */
- /* BSP_STUBS */
- /* configlettes */
- #include "sysComms.c"
- #include "intrinsics.c"
- #include "net/usrBootLine.c"
- #include "net/usrBsdSocket.c"
- #include "net/usrEndLib.c"
- #include "net/usrFtp.c"
- #include "net/usrNetBoot.c"
- #include "net/usrNetBootUtil.c"
- #include "net/usrNetConfigIf.c"
- #include "net/usrNetEndBoot.c"
- #include "net/usrNetIcmp.c"
- #include "net/usrNetIpLib.c"
- #include "net/usrNetLib.c"
- #include "net/usrNetLoopbackStart.c"
- #include "net/usrNetMuxCfg.c"
- #include "net/usrNetRemoteCfg.c"
- #include "net/usrTcp.c"
- #include "net/usrUdp.c"
- #include "sysClkInit.c"
- #include "usrBreakpoint.c"
- #include "usrCache.c"
- #include "usrKernel.c"
- #include "usrMmuInit.c"
- #include "usrSerial.c"
- #include "usrStartup.c"
- #include "usrWdbBanner.c"
- #include "usrWdbBp.c"
- #include "usrWdbCore.c"
- #include "usrWdbSys.c"
- #include "usrWdbTask.c"
- #include "usrWindview.c"
- #include "usrWvFileUploadPath.c"
- #include "usrWvTsfsUploadPath.c"
- #include "wdbEnd.c"
- /******************************************************************************
- *
- * usrInit - pre-kernel initialization
- */
- void usrInit (int startType)
- {
- sysStart (startType); /* clear BSS and set up the vector table base address. */
- cacheLibInit (USER_I_CACHE_MODE, USER_D_CACHE_MODE); /* include cache support */
- excVecInit (); /* exception handling */
- sysHwInit (); /* call the BSPs sysHwInit routine during system startup */
- usrCacheEnable (); /* optionally enable caches */
- wvLibInit (); /* low-level kernel instrumentation needed by windview */
- usrKernelInit (); /* context switch and interrupt handling. DO NOT REMOVE. */
- }
- /******************************************************************************
- *
- * usrNetProtoInit - Initialize the network protocol stacks
- */
- void usrNetProtoInit (void)
- {
- usrBsdSockLibInit(); /* BSD Socket Support */
- hostTblInit(); /* Host Table Support */
- usrIpLibInit(); /* BSD 4.4 IPv4 */
- udpLibInit (&udpCfgParams); /* BSD 4.4. UDPv4 */
- tcpLibInit (&tcpCfgParams); /* BSD 4.4 TCPv4 */
- icmpLibInit (&icmpCfgParams); /* BSD 4.4 ICMPv4 */
- igmpLibInit(); /* BSD 4.4 IGMPv4 */
- netLibInit(); /* creates the network task that runs low-level network interface routines in a task context */
- /* Includes the ARP cache APIs */
- }
- /******************************************************************************
- *
- * usrNetworkAddrInit - Initialize the network address for a device
- */
- void usrNetworkAddrInit (void)
- {
- usrDhcpcLeaseClean (); /* Deletes DHCP time values from address field */
- }
- /******************************************************************************
- *
- * usrNetworkDevStart - Attach a network device and start the loopback driver
- */
- void usrNetworkDevStart (void)
- {
- usrNetEndDevStart (pDevName, uNum); /* Uses boot parameters to start an END driver */
- usrNetLoopbackStart (); /* loopback interface for routining to localhost */
- }
- /******************************************************************************
- *
- * usrNetworkBoot - Setup a network device using the boot parameters
- */
- void usrNetworkBoot (void)
- {
- usrNetBoot (); /* Reads the enet address from the bootline parameters */
- usrNetworkAddrInit (); /* Initialize the network address for a device */
- usrNetmaskGet (); /* Extracts netmask value from address field */
- usrNetDevNameGet (); /* Gets name from "other" field if booting from disk */
- usrNetworkDevStart (); /* Attach a network device and start the loopback driver */
- }
- /******************************************************************************
- *
- * usrNetworkAddrCheck - Get an IP address if needed and setup the boot device
- */
- void usrNetworkAddrCheck (void)
- {
- usrNetConfig (pDevName, uNum, pTgtName, pAddrString); /* Assigns an IP address and netmask */
- }
- /******************************************************************************
- *
- * usrNetRemoteInit -
- */
- void usrNetRemoteInit (void)
- {
- usrNetHostSetup (); /* Route creation and hostname setup */
- usrNetRemoteCreate (); /* Allows access to file system on boot host */
- }
- /******************************************************************************
- *
- * usrNetAppInit -
- */
- void usrNetAppInit (void)
- {
- usrFtpInit(); /* File Transfer Protocol (FTP) library */
- }
- /******************************************************************************
- *
- * usrNetworkInit - Initialize the network subsystem
- */
- void usrNetworkInit (void)
- {
- usrNetLibInit (); /* network buffer creation and device support */
- usrNetProtoInit (); /* Initialize the network protocol stacks */
- usrMuxLibInit (); /* network driver to protocol multiplexer */
- usrEndLibInit(); /* Support for network devices using MUX/END interface */
- /* This should always be included for backward compatibility */
- usrNetworkBoot (); /* Setup a network device using the boot parameters */
- usrNetworkAddrCheck (); /* Get an IP address if needed and setup the boot device */
- usrNetRemoteInit (); /* initialize network remote I/O access */
- usrNetAppInit (); /* initialize network application protocols */
- }
- /******************************************************************************
- *
- * usrWdbInit - the WDB target agent
- */
- void usrWdbInit (void)
- {
- wdbConfig (); /* software agent to support the tornado tools */
- wdbMemLibInit (); /* read/write target memory */
- wdbSysModeInit (); /* A breakpoint stops the entire operating system. */
- wdbTaskModeInit (); /* A breakpoint stops one task, while others keep running. */
- wdbEventLibInit (); /* asynchronous event handling needed for breakpoints etc. */
- wdbEvtptLibInit (); /* support library for breakpoints and other asynchonous events. */
- wdbDirectCallLibInit (); /* call arbitrary functions directly from WDB */
- wdbCtxLibInit (); /* create/delete/manipulate tasks */
- wdbRegsLibInit (); /* get/set registers */
- wdbGopherLibInit (); /* information gathering language used by many tools */
- wdbCtxExitLibInit (); /* ability to notify the host when a task exits */
- wdbExcLibInit (); /* notify the host when an exception occurs */
- wdbFuncCallLibInit (); /* asynchronous function calls */
- wdbVioLibInit (); /* low-level virtual I/O handling */
- wdbVioDrv ("/vio"); /* vxWorks driver for accessing virtual I/O */
- usrWdbBp (); /* core breakpoint library */
- wdbTaskBpLibInit (); /* task-mode breakpoint library */
- wdbCtxStartLibInit (); /* ability to notify the host when a task starts */
- wdbUserEvtLibInit (); /* ability to send user events to the host */
- usrWdbBanner (); /* print banner to console after the agent is initialized */
- }
- /******************************************************************************
- *
- * usrWindviewInit -
- */
- void usrWindviewInit (void)
- {
- windviewConfig (); /* initialize and control event logging */
- wvTmrRegister ((UINTFUNCPTR) USER_TIMESTAMP, (UINTFUNCPTR) USER_TIMESTAMPLOCK, (FUNCPTR) USER_TIMEENABLE, (FUNCPTR) USER_TIMEDISABLE, (FUNCPTR) USER_TIMECONNECT, (UINTFUNCPTR) USER_TIMEPERIOD, (UINTFUNCPTR) USER_TIMEFREQ); /* user-defined timestamp routines */
- rBuffLibInit (); /* windview 2.0 ring of buffers for event logging */
- wdbTsfsDrv ("/tgtsvr"); /* virtual file system based on the WDB agent */
- usrWvTsfsUploadPathInit (); /* initialize path for the upload through TSFS socket */
- usrWvFileUploadPathInit (); /* initialize path for the upload to file */
- }
- /******************************************************************************
- *
- * usrShowInit - enable object show routines
- */
- void usrShowInit (void)
- {
- taskShowInit (); /* task show routine */
- msgQShowInit (); /* message queue show routine */
- }
- /******************************************************************************
- *
- * usrToolsInit - software development tools
- */
- void usrToolsInit (void)
- {
- timexInit (); /* utility to measure function execution time */
- usrWdbInit (); /* the WDB target agent */
- usrWindviewInit (); /* usrWindviewInit */
- usrShowInit (); /* enable object show routines */
- }
- /******************************************************************************
- *
- * usrKernelCoreInit - core kernel facilities
- */
- void usrKernelCoreInit (void)
- {
- eventLibInit (); /* VxWorks events */
- semBLibInit (); /* binary semaphores */
- semMLibInit (); /* mutex semaphores */
- semCLibInit (); /* counting semaphores */
- msgQLibInit (); /* message queues */
- wdLibInit (); /* watchdog timers */
- taskHookInit (); /* user callouts on task creation/deletion/context switch */
- }
- /******************************************************************************
- *
- * usrKernelExtraInit - extended kernel facilities
- */
- void usrKernelExtraInit (void)
- {
- hashLibInit (); /* hash library */
- symLibInit (); /* symbol table */
- envLibInit (ENV_VAR_USE_HOOKS); /* environment variables */
- sigInit (); /* signals */
- }
- /******************************************************************************
- *
- * usrIosCoreInit - core I/O system
- */
- void usrIosCoreInit (void)
- {
- mathSoftInit (); /* software fpp support */
- usrBootLineParse (BOOT_LINE_ADRS); /* parse some boot device configuration info */
- iosInit (NUM_DRIVERS, NUM_FILES, "/null"); /* IO system */
- ttyDrv (); /* terminal driver */
- usrSerialInit (); /* SIO component */
- }
- /******************************************************************************
- *
- * usrIosExtraInit - extended I/O system
- */
- void usrIosExtraInit (void)
- {
- excShowInit (); /* exception show routines */
- excInit (); /* miscellaneous support task */
- logInit (consoleFd, MAX_LOG_MSGS); /* message logging */
- pipeDrv (); /* pipes */
- stdioInit (); /* buffered IO library */
- fioLibInit (); /* formatting for printf, scanf, etc. */
- floatInit (); /* allow printf and others to format floats correctly */
- }
- /******************************************************************************
- *
- * usrRoot - entry point for post-kernel initialization
- */
- void usrRoot (char *pMemPoolStart, unsigned memPoolSize)
- {
- usrKernelCoreInit (); /* core kernel facilities */
- memInit (pMemPoolStart, memPoolSize); /* full featured memory allocator */
- memPartLibInit (pMemPoolStart, memPoolSize); /* core memory partition manager */
- usrMmuInit (); /* basic MMU component */
- sysClkInit (); /* System clock component */
- selectInit (NUM_FILES); /* select */
- usrIosCoreInit (); /* core I/O system */
- usrKernelExtraInit (); /* extended kernel facilities */
- usrIosExtraInit (); /* extended I/O system */
- usrNetworkInit (); /* Initialize the network subsystem */
- selTaskDeleteHookAdd (); /* install select task delete hook */
- usrToolsInit (); /* software development tools */
- cplusCtorsLink (); /* run compiler generated initialization functions at system startup */
- usrAppInit (); /* call usrAppInit() (in your usrAppInit.c project file) after startup. */
- }