Makefile.in
上传用户:center1979
上传日期:2022-07-26
资源大小:50633k
文件大小:31k
- # Makefile.in generated by automake 1.10.1 from Makefile.am.
- # KDE tags expanded automatically by am_edit - $Revision: 483858 $
- # @configure_input@
- # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- # 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
- # This Makefile.in is free software; the Free Software Foundation
- # gives unlimited permission to copy and/or distribute it,
- # with or without modifications, as long as this notice is preserved.
- # This program is distributed in the hope that it will be useful,
- # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
- # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
- # PARTICULAR PURPOSE.
- @SET_MAKE@
- VPATH = @srcdir@
- pkglibdir = $(libdir)/@PACKAGE@
- pkgincludedir = $(includedir)/@PACKAGE@
- am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
- install_sh_DATA = $(install_sh) -c -m 644
- install_sh_PROGRAM = $(install_sh) -c
- install_sh_SCRIPT = $(install_sh) -c
- INSTALL_HEADER = $(INSTALL_DATA)
- transform = $(program_transform_name)
- NORMAL_INSTALL = :
- PRE_INSTALL = :
- POST_INSTALL = :
- NORMAL_UNINSTALL = :
- PRE_UNINSTALL = :
- POST_UNINSTALL = :
- build_triplet = @build@
- host_triplet = @host@
- target_triplet = @target@
- subdir = .
- DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am
- $(srcdir)/Makefile.in $(srcdir)/config.h.in
- $(top_srcdir)/configure ABOUT-NLS AUTHORS COPYING ChangeLog
- INSTALL NEWS admin/compile admin/config.guess
- admin/config.rpath admin/config.sub admin/depcomp
- admin/install-sh admin/ltmain.sh admin/missing
- admin/mkinstalldirs admin/ylwrap depcomp install-sh missing
- mkinstalldirs
- ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
- am__aclocal_m4_deps = $(top_srcdir)/macros/gconf-2.m4
- $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.in
- am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES)
- $(ACLOCAL_M4)
- am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log
- configure.lineno config.status.lineno
- mkinstalldirs = $(SHELL) $(top_srcdir)/admin/mkinstalldirs
- CONFIG_HEADER = config.h
- CONFIG_CLEAN_FILES =
- SOURCES =
- DIST_SOURCES =
- #>- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive
- #>- html-recursive info-recursive install-data-recursive
- #>- install-dvi-recursive install-exec-recursive
- #>- install-html-recursive install-info-recursive
- #>- install-pdf-recursive install-ps-recursive install-recursive
- #>- installcheck-recursive installdirs-recursive pdf-recursive
- #>- ps-recursive uninstall-recursive
- #>+ 7
- RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive
- html-recursive info-recursive install-data-recursive
- install-dvi-recursive install-exec-recursive
- install-html-recursive install-info-recursive
- install-pdf-recursive install-ps-recursive install-recursive
- installcheck-recursive installdirs-recursive pdf-recursive
- ps-recursive uninstall-recursive nmcheck-recursive bcheck-recursive
- am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
- am__vpath_adj = case $$p in
- $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;;
- *) f=$$p;;
- esac;
- am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
- am__installdirs = "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(splashdir)"
- pkgdataDATA_INSTALL = $(INSTALL_DATA)
- splashDATA_INSTALL = $(INSTALL_DATA)
- DATA = $(noinst_DATA) $(pkgdata_DATA) $(splash_DATA)
- RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive
- distclean-recursive maintainer-clean-recursive
- ETAGS = etags
- CTAGS = ctags
- DIST_SUBDIRS = $(SUBDIRS)
- #>- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
- #>+ 1
- DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) $(KDE_DIST)
- distdir = $(PACKAGE)-$(VERSION)
- top_distdir = $(distdir)
- am__remove_distdir =
- { test ! -d $(distdir)
- || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';'
- && rm -fr $(distdir); }; }
- DIST_ARCHIVES = $(distdir).tar.gz
- GZIP_ENV = --best
- distuninstallcheck_listfiles = find . -type f -print
- distcleancheck_listfiles = find . -type f -print
- pkgdatadir = @datadir@/@PACKAGE@
- ACLOCAL = @ACLOCAL@
- AMTAR = @AMTAR@
- AR = @AR@
- ARTSCCONFIG = @ARTSCCONFIG@
- AUTOCONF = @AUTOCONF@
- AUTODIRS = @AUTODIRS@
- AUTOHEADER = @AUTOHEADER@
- AUTOMAKE = @AUTOMAKE@
- AWK = @AWK@
- CAIRO_CFLAGS = @CAIRO_CFLAGS@
- CAIRO_LIBS = @CAIRO_LIBS@
- CC = @CC@
- CCDEPMODE = @CCDEPMODE@
- CFLAGS = @CFLAGS@
- CPP = @CPP@
- CPPFLAGS = @CPPFLAGS@
- CXX = @CXX@
- CXXCPP = @CXXCPP@
- CXXDEPMODE = @CXXDEPMODE@
- CXXFLAGS = @CXXFLAGS@
- CYGPATH_W = @CYGPATH_W@
- DCOPIDL = @DCOPIDL@
- DCOPIDL2CPP = @DCOPIDL2CPP@
- DCOPIDLNG = @DCOPIDLNG@
- DCOP_DEPENDENCIES = @DCOP_DEPENDENCIES@
- DEFS = @DEFS@
- DEPDIR = @DEPDIR@
- DSYMUTIL = @DSYMUTIL@
- ECHO = @ECHO@
- ECHO_C = @ECHO_C@
- ECHO_N = @ECHO_N@
- ECHO_T = @ECHO_T@
- EGREP = @EGREP@
- ENABLE_PERMISSIVE_FLAG = @ENABLE_PERMISSIVE_FLAG@
- EXEEXT = @EXEEXT@
- F77 = @F77@
- FFLAGS = @FFLAGS@
- FRAMEWORK_COREAUDIO = @FRAMEWORK_COREAUDIO@
- GCONF_SCHEMA_CONFIG_SOURCE = @GCONF_SCHEMA_CONFIG_SOURCE@
- GCONF_SCHEMA_FILE_DIR = @GCONF_SCHEMA_FILE_DIR@
- GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
- GMSGFMT = @GMSGFMT@
- GMSGFMT_015 = @GMSGFMT_015@
- GREP = @GREP@
- GTK_CFLAGS = @GTK_CFLAGS@
- GTK_LIBS = @GTK_LIBS@
- HAVE_GCC_VISIBILITY = @HAVE_GCC_VISIBILITY@
- HIPDIR = @HIPDIR@
- INSTALL = @INSTALL@
- INSTALL_DATA = @INSTALL_DATA@
- INSTALL_PROGRAM = @INSTALL_PROGRAM@
- INSTALL_SCRIPT = @INSTALL_SCRIPT@
- INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
- INTLLIBS = @INTLLIBS@
- INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
- KCFG_DEPENDENCIES = @KCFG_DEPENDENCIES@
- KCONFIG_COMPILER = @KCONFIG_COMPILER@
- KDE_CHECK_PLUGIN = @KDE_CHECK_PLUGIN@
- KDE_EXTRA_RPATH = @KDE_EXTRA_RPATH@
- KDE_INCLUDES = @KDE_INCLUDES@
- KDE_LDFLAGS = @KDE_LDFLAGS@
- KDE_MT_LDFLAGS = @KDE_MT_LDFLAGS@
- KDE_MT_LIBS = @KDE_MT_LIBS@
- KDE_NO_UNDEFINED = @KDE_NO_UNDEFINED@
- KDE_PLUGIN = @KDE_PLUGIN@
- KDE_RPATH = @KDE_RPATH@
- KDE_USE_CLOSURE_FALSE = @KDE_USE_CLOSURE_FALSE@
- KDE_USE_CLOSURE_TRUE = @KDE_USE_CLOSURE_TRUE@
- KDE_USE_FINAL_FALSE = @KDE_USE_FINAL_FALSE@
- KDE_USE_FINAL_TRUE = @KDE_USE_FINAL_TRUE@
- KDE_USE_FPIE = @KDE_USE_FPIE@
- KDE_USE_NMCHECK_FALSE = @KDE_USE_NMCHECK_FALSE@
- KDE_USE_NMCHECK_TRUE = @KDE_USE_NMCHECK_TRUE@
- KDE_USE_PIE = @KDE_USE_PIE@
- KDE_XSL_STYLESHEET = @KDE_XSL_STYLESHEET@
- LDFLAGS = @LDFLAGS@
- LDFLAGS_AS_NEEDED = @LDFLAGS_AS_NEEDED@
- LDFLAGS_NEW_DTAGS = @LDFLAGS_NEW_DTAGS@
- LIBCOMPAT = @LIBCOMPAT@
- LIBCRYPT = @LIBCRYPT@
- LIBDL = @LIBDL@
- LIBICONV = @LIBICONV@
- LIBINTL = @LIBINTL@
- LIBJPEG = @LIBJPEG@
- LIBOBJS = @LIBOBJS@
- LIBPNG = @LIBPNG@
- LIBPTHREAD = @LIBPTHREAD@
- LIBRESOLV = @LIBRESOLV@
- LIBS = @LIBS@
- LIBSM = @LIBSM@
- LIBSOCKET = @LIBSOCKET@
- LIBTOOL = @LIBTOOL@
- LIBUCB = @LIBUCB@
- LIBUTIL = @LIBUTIL@
- LIBZ = @LIBZ@
- LIB_KAB = @LIB_KAB@
- LIB_KABC = @LIB_KABC@
- LIB_KDECORE = @LIB_KDECORE@
- LIB_KDED = @LIB_KDED@
- LIB_KDEPIM = @LIB_KDEPIM@
- LIB_KDEPRINT = @LIB_KDEPRINT@
- LIB_KDEUI = @LIB_KDEUI@
- LIB_KDNSSD = @LIB_KDNSSD@
- LIB_KFILE = @LIB_KFILE@
- LIB_KFM = @LIB_KFM@
- LIB_KHTML = @LIB_KHTML@
- LIB_KIMPROXY = @LIB_KIMPROXY@
- LIB_KIO = @LIB_KIO@
- LIB_KJS = @LIB_KJS@
- LIB_KNEWSTUFF = @LIB_KNEWSTUFF@
- LIB_KPARTS = @LIB_KPARTS@
- LIB_KSPELL = @LIB_KSPELL@
- LIB_KSYCOCA = @LIB_KSYCOCA@
- LIB_KUNITTEST = @LIB_KUNITTEST@
- LIB_KUTILS = @LIB_KUTILS@
- LIB_POLL = @LIB_POLL@
- LIB_QPE = @LIB_QPE@
- LIB_QT = @LIB_QT@
- LIB_SMB = @LIB_SMB@
- LIB_X11 = @LIB_X11@
- LIB_XEXT = @LIB_XEXT@
- LIB_XRENDER = @LIB_XRENDER@
- LN_S = @LN_S@
- LTLIBICONV = @LTLIBICONV@
- LTLIBINTL = @LTLIBINTL@
- LTLIBOBJS = @LTLIBOBJS@
- LUALIB_CFLAGS = @LUALIB_CFLAGS@
- LUALIB_LIBS = @LUALIB_LIBS@
- LUA_CFLAGS = @LUA_CFLAGS@
- LUA_LIBS = @LUA_LIBS@
- MAKEINFO = @MAKEINFO@
- MAKEKDEWIDGETS = @MAKEKDEWIDGETS@
- MCOPIDL = @MCOPIDL@
- MEINPROC = @MEINPROC@
- MKDIR_P = @MKDIR_P@
- MOC = @MOC@
- MSGFMT = @MSGFMT@
- MSGFMT_015 = @MSGFMT_015@
- MSGMERGE = @MSGMERGE@
- NMEDIT = @NMEDIT@
- NOOPT_CFLAGS = @NOOPT_CFLAGS@
- NOOPT_CXXFLAGS = @NOOPT_CXXFLAGS@
- OBJEXT = @OBJEXT@
- PACKAGE = @PACKAGE@
- PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
- PACKAGE_NAME = @PACKAGE_NAME@
- PACKAGE_STRING = @PACKAGE_STRING@
- PACKAGE_TARNAME = @PACKAGE_TARNAME@
- PACKAGE_VERSION = @PACKAGE_VERSION@
- PATH_SEPARATOR = @PATH_SEPARATOR@
- PERL = @PERL@
- PKGDATADIR = @PKGDATADIR@
- PKG_CONFIG = @PKG_CONFIG@
- POSUB = @POSUB@
- QTE_NORTTI = @QTE_NORTTI@
- QT_INCLUDES = @QT_INCLUDES@
- QT_LDFLAGS = @QT_LDFLAGS@
- RANLIB = @RANLIB@
- SED = @SED@
- SET_MAKE = @SET_MAKE@
- SHELL = @SHELL@
- SPICELIB = @SPICELIB@
- STRIP = @STRIP@
- THEORA_CFLAGS = @THEORA_CFLAGS@
- THEORA_LIBS = @THEORA_LIBS@
- UIC = @UIC@
- UIC_TR = @UIC_TR@
- USER_INCLUDES = @USER_INCLUDES@
- USER_LDFLAGS = @USER_LDFLAGS@
- USE_EXCEPTIONS = @USE_EXCEPTIONS@
- USE_NLS = @USE_NLS@
- USE_RTTI = @USE_RTTI@
- USE_THREADS = @USE_THREADS@
- VERSION = @VERSION@
- WOVERLOADED_VIRTUAL = @WOVERLOADED_VIRTUAL@
- XGETTEXT = @XGETTEXT@
- XGETTEXT_015 = @XGETTEXT_015@
- XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
- XMKMF = @XMKMF@
- XMLLINT = @XMLLINT@
- X_CFLAGS = @X_CFLAGS@
- X_EXTRA_LIBS = @X_EXTRA_LIBS@
- X_INCLUDES = @X_INCLUDES@
- X_LDFLAGS = @X_LDFLAGS@
- X_LIBS = @X_LIBS@
- X_PRE_LIBS = @X_PRE_LIBS@
- X_RPATH = @X_RPATH@
- abs_builddir = @abs_builddir@
- abs_srcdir = @abs_srcdir@
- abs_top_builddir = @abs_top_builddir@
- abs_top_srcdir = @abs_top_srcdir@
- ac_ct_CC = @ac_ct_CC@
- ac_ct_CXX = @ac_ct_CXX@
- ac_ct_F77 = @ac_ct_F77@
- all_includes = @all_includes@
- all_libraries = @all_libraries@
- am__include = @am__include@
- am__leading_dot = @am__leading_dot@
- am__quote = @am__quote@
- am__tar = @am__tar@
- am__untar = @am__untar@
- bindir = @bindir@
- build = @build@
- build_alias = @build_alias@
- build_cpu = @build_cpu@
- build_os = @build_os@
- build_vendor = @build_vendor@
- builddir = @builddir@
- datadir = @datadir@
- datarootdir = @datarootdir@
- docdir = @docdir@
- dvidir = @dvidir@
- exec_prefix = @exec_prefix@
- host = @host@
- host_alias = @host_alias@
- host_cpu = @host_cpu@
- host_os = @host_os@
- host_vendor = @host_vendor@
- htmldir = @htmldir@
- includedir = @includedir@
- infodir = @infodir@
- install_sh = @install_sh@
- kde_appsdir = @kde_appsdir@
- kde_bindir = @kde_bindir@
- kde_confdir = @kde_confdir@
- kde_datadir = @kde_datadir@
- kde_htmldir = @kde_htmldir@
- kde_icondir = @kde_icondir@
- kde_includes = @kde_includes@
- kde_kcfgdir = @kde_kcfgdir@
- kde_libraries = @kde_libraries@
- kde_locale = @kde_locale@
- kde_mimedir = @kde_mimedir@
- kde_moduledir = @kde_moduledir@
- kde_qtver = @kde_qtver@
- kde_servicesdir = @kde_servicesdir@
- kde_servicetypesdir = @kde_servicetypesdir@
- kde_sounddir = @kde_sounddir@
- kde_styledir = @kde_styledir@
- kde_templatesdir = @kde_templatesdir@
- kde_wallpaperdir = @kde_wallpaperdir@
- kde_widgetdir = @kde_widgetdir@
- kdeinitdir = @kdeinitdir@
- libdir = @libdir@
- libexecdir = @libexecdir@
- localedir = @localedir@
- localstatedir = @localstatedir@
- mandir = @mandir@
- mkdir_p = @mkdir_p@
- oldincludedir = @oldincludedir@
- pdfdir = @pdfdir@
- prefix = @prefix@
- program_transform_name = @program_transform_name@
- psdir = @psdir@
- qt_includes = @qt_includes@
- qt_libraries = @qt_libraries@
- sbindir = @sbindir@
- sharedstatedir = @sharedstatedir@
- srcdir = @srcdir@
- sysconfdir = @sysconfdir@
- target = @target@
- target_alias = @target_alias@
- target_cpu = @target_cpu@
- target_os = @target_os@
- target_vendor = @target_vendor@
- top_builddir = @top_builddir@
- top_srcdir = @top_srcdir@
- x_includes = @x_includes@
- x_libraries = @x_libraries@
- xdg_appsdir = @xdg_appsdir@
- xdg_directorydir = @xdg_directorydir@
- xdg_menudir = @xdg_menudir@
- ACLOCAL_AMFLAGS = -I macros
- dosstuff =
- celestia.mak
- celestia.iss
- celestia.sln
- celestia.vcproj
- $(wildcard *.bat)
- noinst_DATA =
- coding-standards.html
- devguide.txt
- $(dosstuff)
- pkgdata_DATA =
- celestia.cfg
- controls.txt
- COPYING
- $(wildcard *.cel)
- EXTRA_DIST =
- $(pkgdata_DATA)
- $(noinst_DATA)
- splash.png
- po/extract_resource_strings.pl
- po/translate_resources.pl
- TRANSLATORS
- splashdir = $(pkgdatadir)/splash
- splash_DATA = splash.png
- SUBDIRS = src data extras extras-standard textures models shaders fonts po po2 locale scripts
- # Non-automake directories
- NONAUTO = admin macosx windows
- # This is just silly
- #$(top_srcdir)/acinclude.m4: $(top_srcdir)/admin/acinclude.m4.in $(top_srcdir)/admin/libtool.m4.in
- # @cd $(top_srcdir) && cat admin/acinclude.m4.in admin/libtool.m4.in > acinclude.m4
- MAINTAINERCLEANFILES = subdirs configure.in acinclude.m4
- #>- all: config.h
- #>+ 1
- all: docs-am config.h
- $(MAKE) $(AM_MAKEFLAGS) all-recursive
- .SUFFIXES:
- am--refresh:
- @:
- $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps)
- #>- @for dep in $?; do
- #>- case '$(am__configure_deps)' in
- #>- *$$dep*)
- #>- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu ';
- #>- cd $(srcdir) && $(AUTOMAKE) --gnu
- #>- && exit 0;
- #>- exit 1;;
- #>- esac;
- #>- done;
- #>- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile';
- #>- cd $(top_srcdir) &&
- #>- $(AUTOMAKE) --gnu Makefile
- #>+ 14
- @for dep in $?; do
- case '$(am__configure_deps)' in
- *$$dep*)
- echo ' cd $(srcdir) && $(AUTOMAKE) --gnu ';
- (
- cd $(srcdir) && $(AUTOMAKE) --gnu
- ) || exit 1; echo ' cd $(top_srcdir) && perl admin/am_edit -padmin '; cd $(top_srcdir) && perl admin/am_edit -padmin && exit 0;
- exit 1;;
- esac;
- done;
- echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile';
- cd $(top_srcdir) &&
- $(AUTOMAKE) --gnu Makefile
- cd $(top_srcdir) && perl admin/am_edit -padmin Makefile.in
- .PRECIOUS: Makefile
- Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
- @case '$?' in
- *config.status*)
- echo ' $(SHELL) ./config.status';
- $(SHELL) ./config.status;;
- *)
- echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)';
- cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);;
- esac;
- $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
- $(SHELL) ./config.status --recheck
- $(top_srcdir)/configure: $(am__configure_deps)
- #>- cd $(srcdir) && $(AUTOCONF)
- #>+ 2
- cd $(srcdir) && rm -f configure
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure
- $(ACLOCAL_M4): $(am__aclocal_m4_deps)
- cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
- config.h: stamp-h1
- @if test ! -f $@; then
- rm -f stamp-h1;
- $(MAKE) $(AM_MAKEFLAGS) stamp-h1;
- else :; fi
- stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
- @rm -f stamp-h1
- cd $(top_builddir) && $(SHELL) ./config.status config.h
- $(srcdir)/config.h.in: $(am__configure_deps)
- cd $(top_srcdir) && $(AUTOHEADER)
- rm -f stamp-h1
- touch $@
- distclean-hdr:
- -rm -f config.h stamp-h1
- mostlyclean-libtool:
- -rm -f *.lo
- clean-libtool:
- -rm -rf .libs _libs
- distclean-libtool:
- -rm -f libtool
- install-pkgdataDATA: $(pkgdata_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(pkgdatadir)" || $(MKDIR_P) "$(DESTDIR)$(pkgdatadir)"
- @list='$(pkgdata_DATA)'; for p in $$list; do
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi;
- f=$(am__strip_dir)
- echo " $(pkgdataDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgdatadir)/$$f'";
- $(pkgdataDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgdatadir)/$$f";
- done
- uninstall-pkgdataDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(pkgdata_DATA)'; for p in $$list; do
- f=$(am__strip_dir)
- echo " rm -f '$(DESTDIR)$(pkgdatadir)/$$f'";
- rm -f "$(DESTDIR)$(pkgdatadir)/$$f";
- done
- install-splashDATA: $(splash_DATA)
- @$(NORMAL_INSTALL)
- test -z "$(splashdir)" || $(MKDIR_P) "$(DESTDIR)$(splashdir)"
- @list='$(splash_DATA)'; for p in $$list; do
- if test -f "$$p"; then d=; else d="$(srcdir)/"; fi;
- f=$(am__strip_dir)
- echo " $(splashDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(splashdir)/$$f'";
- $(splashDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(splashdir)/$$f";
- done
- uninstall-splashDATA:
- @$(NORMAL_UNINSTALL)
- @list='$(splash_DATA)'; for p in $$list; do
- f=$(am__strip_dir)
- echo " rm -f '$(DESTDIR)$(splashdir)/$$f'";
- rm -f "$(DESTDIR)$(splashdir)/$$f";
- done
- # This directory's subdirectories are mostly independent; you can cd
- # into them and run `make' without going through this Makefile.
- # To change the values of `make' variables: instead of editing Makefiles,
- # (1) if the variable is set in `config.status', edit `config.status'
- # (which will cause the Makefiles to be regenerated when you run `make');
- # (2) otherwise, pass the desired values on the `make' command line.
- $(RECURSIVE_TARGETS):
- @failcom='exit 1';
- for f in x $$MAKEFLAGS; do
- case $$f in
- *=* | --[!k]*);;
- *k*) failcom='fail=yes';;
- esac;
- done;
- dot_seen=no;
- target=`echo $@ | sed s/-recursive//`;
- list='$(SUBDIRS)'; for subdir in $$list; do
- echo "Making $$target in $$subdir";
- if test "$$subdir" = "."; then
- dot_seen=yes;
- local_target="$$target-am";
- else
- local_target="$$target";
- fi;
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target)
- || eval $$failcom;
- done;
- if test "$$dot_seen" = "no"; then
- $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1;
- fi; test -z "$$fail"
- $(RECURSIVE_CLEAN_TARGETS):
- @failcom='exit 1';
- for f in x $$MAKEFLAGS; do
- case $$f in
- *=* | --[!k]*);;
- *k*) failcom='fail=yes';;
- esac;
- done;
- dot_seen=no;
- case "$@" in
- distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;;
- *) list='$(SUBDIRS)' ;;
- esac;
- rev=''; for subdir in $$list; do
- if test "$$subdir" = "."; then :; else
- rev="$$subdir $$rev";
- fi;
- done;
- rev="$$rev .";
- target=`echo $@ | sed s/-recursive//`;
- for subdir in $$rev; do
- echo "Making $$target in $$subdir";
- if test "$$subdir" = "."; then
- local_target="$$target-am";
- else
- local_target="$$target";
- fi;
- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target)
- || eval $$failcom;
- done && test -z "$$fail"
- tags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags);
- done
- ctags-recursive:
- list='$(SUBDIRS)'; for subdir in $$list; do
- test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags);
- done
- ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
- list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)';
- unique=`for i in $$list; do
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
- done |
- $(AWK) '{ files[$$0] = 1; nonemtpy = 1; }
- END { if (nonempty) { for (i in files) print i; }; }'`;
- mkid -fID $$unique
- tags: TAGS
- TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
- $(TAGS_FILES) $(LISP)
- tags=;
- here=`pwd`;
- if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then
- include_option=--etags-include;
- empty_fix=.;
- else
- include_option=--include;
- empty_fix=;
- fi;
- list='$(SUBDIRS)'; for subdir in $$list; do
- if test "$$subdir" = .; then :; else
- test ! -f $$subdir/TAGS ||
- tags="$$tags $$include_option=$$here/$$subdir/TAGS";
- fi;
- done;
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)';
- unique=`for i in $$list; do
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
- done |
- $(AWK) '{ files[$$0] = 1; nonempty = 1; }
- END { if (nonempty) { for (i in files) print i; }; }'`;
- if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else
- test -n "$$unique" || unique=$$empty_fix;
- $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS)
- $$tags $$unique;
- fi
- ctags: CTAGS
- CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES)
- $(TAGS_FILES) $(LISP)
- tags=;
- list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)';
- unique=`for i in $$list; do
- if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi;
- done |
- $(AWK) '{ files[$$0] = 1; nonempty = 1; }
- END { if (nonempty) { for (i in files) print i; }; }'`;
- test -z "$(CTAGS_ARGS)$$tags$$unique"
- || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS)
- $$tags $$unique
- GTAGS:
- here=`$(am__cd) $(top_builddir) && pwd`
- && cd $(top_srcdir)
- && gtags -i $(GTAGS_ARGS) $$here
- distclean-tags:
- -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
- distdir: $(DISTFILES)
- $(am__remove_distdir)
- test -d $(distdir) || mkdir $(distdir)
- @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\*]/\\&/g'`;
- topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\*]/\\&/g'`;
- list='$(DISTFILES)';
- dist_files=`for file in $$list; do echo $$file; done |
- sed -e "s|^$$srcdirstrip/||;t"
- -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`;
- case $$dist_files in
- */*) $(MKDIR_P) `echo "$$dist_files" |
- sed '///!d;s|^|$(distdir)/|;s,/[^/]*$$,,' |
- sort -u` ;;
- esac;
- for file in $$dist_files; do
- if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi;
- if test -d $$d/$$file; then
- dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`;
- if test -d $(srcdir)/$$file && test $$d != $(srcdir); then
- cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1;
- fi;
- cp -pR $$d/$$file $(distdir)$$dir || exit 1;
- else
- test -f $(distdir)/$$file
- || cp -p $$d/$$file $(distdir)/$$file
- || exit 1;
- fi;
- done
- list='$(DIST_SUBDIRS)'; for subdir in $$list; do
- if test "$$subdir" = .; then :; else
- test -d "$(distdir)/$$subdir"
- || $(MKDIR_P) "$(distdir)/$$subdir"
- || exit 1;
- distdir=`$(am__cd) $(distdir) && pwd`;
- top_distdir=`$(am__cd) $(top_distdir) && pwd`;
- (cd $$subdir &&
- $(MAKE) $(AM_MAKEFLAGS)
- top_distdir="$$top_distdir"
- distdir="$$distdir/$$subdir"
- am__remove_distdir=:
- am__skip_length_check=:
- distdir)
- || exit 1;
- fi;
- done
- $(MAKE) $(AM_MAKEFLAGS)
- top_distdir="$(top_distdir)" distdir="$(distdir)"
- dist-hook
- -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} ; -o
- ! -type d ! -perm -444 -links 1 -exec chmod a+r {} ; -o
- ! -type d ! -perm -400 -exec chmod a+r {} ; -o
- ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} ;
- || chmod -R a+r $(distdir)
- dist-gzip: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
- dist-bzip2: distdir
- tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
- $(am__remove_distdir)
- dist-lzma: distdir
- tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma
- $(am__remove_distdir)
- dist-tarZ: distdir
- tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
- $(am__remove_distdir)
- dist-shar: distdir
- shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
- $(am__remove_distdir)
- dist-zip: distdir
- -rm -f $(distdir).zip
- zip -rq $(distdir).zip $(distdir)
- $(am__remove_distdir)
- dist dist-all: distdir
- tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
- $(am__remove_distdir)
- # This target untars the dist file and tries a VPATH configuration. Then
- # it guarantees that the distribution is self-contained by making another
- # tarfile.
- distcheck: dist
- case '$(DIST_ARCHIVES)' in
- *.tar.gz*)
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;
- *.tar.bz2*)
- bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;
- *.tar.lzma*)
- unlzma -c $(distdir).tar.lzma | $(am__untar) ;;
- *.tar.Z*)
- uncompress -c $(distdir).tar.Z | $(am__untar) ;;
- *.shar.gz*)
- GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;
- *.zip*)
- unzip $(distdir).zip ;;
- esac
- chmod -R a-w $(distdir); chmod a+w $(distdir)
- mkdir $(distdir)/_build
- mkdir $(distdir)/_inst
- chmod a-w $(distdir)
- dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\/]:[\/],/,'`
- && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/"
- && cd $(distdir)/_build
- && ../configure --srcdir=.. --prefix="$$dc_install_base"
- $(DISTCHECK_CONFIGURE_FLAGS)
- && $(MAKE) $(AM_MAKEFLAGS)
- && $(MAKE) $(AM_MAKEFLAGS) dvi
- && $(MAKE) $(AM_MAKEFLAGS) check
- && $(MAKE) $(AM_MAKEFLAGS) install
- && $(MAKE) $(AM_MAKEFLAGS) installcheck
- && $(MAKE) $(AM_MAKEFLAGS) uninstall
- && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base"
- distuninstallcheck
- && chmod -R a-w "$$dc_install_base"
- && ({
- (cd ../.. && umask 077 && mkdir "$$dc_destdir")
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall
- && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir"
- distuninstallcheck_dir="$$dc_destdir" distuninstallcheck;
- } || { rm -rf "$$dc_destdir"; exit 1; })
- && rm -rf "$$dc_destdir"
- && $(MAKE) $(AM_MAKEFLAGS) dist
- && rm -rf $(DIST_ARCHIVES)
- && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
- $(am__remove_distdir)
- @(echo "$(distdir) archives ready for distribution: ";
- list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) |
- sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
- distuninstallcheck:
- @cd $(distuninstallcheck_dir)
- && test `$(distuninstallcheck_listfiles) | wc -l` -le 1
- || { echo "ERROR: files left after uninstall:" ;
- if test -n "$(DESTDIR)"; then
- echo " (check DESTDIR support)";
- fi ;
- $(distuninstallcheck_listfiles) ;
- exit 1; } >&2
- distcleancheck: distclean
- @if test '$(srcdir)' = . ; then
- echo "ERROR: distcleancheck can only run from a VPATH build" ;
- exit 1 ;
- fi
- @test `$(distcleancheck_listfiles) | wc -l` -eq 0
- || { echo "ERROR: files left in build directory after distclean:" ;
- $(distcleancheck_listfiles) ;
- exit 1; } >&2
- check-am: all-am
- check: check-recursive
- all-am: Makefile $(DATA) config.h
- installdirs: installdirs-recursive
- installdirs-am:
- for dir in "$(DESTDIR)$(pkgdatadir)" "$(DESTDIR)$(splashdir)"; do
- test -z "$$dir" || $(MKDIR_P) "$$dir";
- done
- install: install-recursive
- install-exec: install-exec-recursive
- install-data: install-data-recursive
- uninstall: uninstall-recursive
- install-am: all-am
- @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
- installcheck: installcheck-recursive
- install-strip:
- $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)"
- install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s
- `test -z '$(STRIP)' ||
- echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
- mostlyclean-generic:
- clean-generic:
- distclean-generic:
- -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
- maintainer-clean-generic:
- @echo "This command is intended for maintainers to use"
- @echo "it deletes files that may require special tools to rebuild."
- -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
- #>- clean: clean-recursive
- #>+ 1
- clean: kde-rpo-clean clean-recursive
- #>- clean-am: clean-generic clean-libtool mostlyclean-am
- #>+ 1
- clean-am: clean-bcheck clean-generic clean-libtool mostlyclean-am
- distclean: distclean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -f Makefile
- distclean-am: clean-am distclean-generic distclean-hdr
- distclean-libtool distclean-tags
- dvi: dvi-recursive
- dvi-am:
- html: html-recursive
- info: info-recursive
- info-am:
- install-data-am: install-pkgdataDATA install-splashDATA
- @$(NORMAL_INSTALL)
- $(MAKE) $(AM_MAKEFLAGS) install-data-hook
- install-dvi: install-dvi-recursive
- install-exec-am:
- install-html: install-html-recursive
- install-info: install-info-recursive
- install-man:
- install-pdf: install-pdf-recursive
- install-ps: install-ps-recursive
- installcheck-am:
- maintainer-clean: maintainer-clean-recursive
- -rm -f $(am__CONFIG_DISTCLEAN_FILES)
- -rm -rf $(top_srcdir)/autom4te.cache
- -rm -f Makefile
- maintainer-clean-am: distclean-am maintainer-clean-generic
- mostlyclean: mostlyclean-recursive
- mostlyclean-am: mostlyclean-generic mostlyclean-libtool
- pdf: pdf-recursive
- pdf-am:
- ps: ps-recursive
- ps-am:
- uninstall-am: uninstall-pkgdataDATA uninstall-splashDATA
- .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am
- install-data-am install-strip
- .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS
- all all-am am--refresh check check-am clean clean-generic
- clean-libtool ctags ctags-recursive dist dist-all dist-bzip2
- dist-gzip dist-hook dist-lzma dist-shar dist-tarZ dist-zip
- distcheck distclean distclean-generic distclean-hdr
- distclean-libtool distclean-tags distcleancheck distdir
- distuninstallcheck dvi dvi-am html html-am info info-am
- install install-am install-data install-data-am
- install-data-hook install-dvi install-dvi-am install-exec
- install-exec-am install-html install-html-am install-info
- install-info-am install-man install-pdf install-pdf-am
- install-pkgdataDATA install-ps install-ps-am
- install-splashDATA install-strip installcheck installcheck-am
- installdirs installdirs-am maintainer-clean
- maintainer-clean-generic mostlyclean mostlyclean-generic
- mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive
- uninstall uninstall-am uninstall-pkgdataDATA
- uninstall-splashDATA
- # From KDE app template
- # We already have a configure.in file, we don't build it from configure.in.in
- #$(top_srcdir)/configure.in: configure.in.in $(top_srcdir)/subdirs
- # cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common configure.in ;
- $(top_srcdir)/subdirs:
- cd $(top_srcdir) && $(MAKE) -f admin/Makefile.common subdirs
- package-messages:
- $(MAKE) -f admin/Makefile.common package-messages
- $(MAKE) -C po merge
- dist-hook:
- (
- cd $(srcdir) &&
- (
- for dir in $(NONAUTO) ; do
- find $$dir -depth -print | egrep -v '(~$$)|(/CVS)|(/.svn)|(/.#)|(/.deps)'
- | cpio -pdum $(distdir) 2>/dev/null ;
- done
- )
- )
- cd $(top_distdir) && perl admin/am_edit -padmin
- cd $(top_distdir) && $(MAKE) -f admin/Makefile.common subdirs
- install-data-hook:
- if [ "$(kde_datadir)" -a -d $(DESTDIR)/$(kde_datadir)/@PACKAGE@ -a ! -h $(DESTDIR)/$(kde_datadir)/@PACKAGE@ ] ; then
- mv -f -b $(DESTDIR)/$(kde_datadir)/@PACKAGE@/* $(DESTDIR)/$(datadir)/@PACKAGE@/ ;
- rmdir $(DESTDIR)/$(kde_datadir)/@PACKAGE@ ;
- fi
- if [ "$(kde_datadir)" -a ! -h $(DESTDIR)/$(kde_datadir)/@PACKAGE@ ] ; then
- ln -s $(datadir)/@PACKAGE@ $(DESTDIR)/$(kde_datadir)/@PACKAGE@ ;
- fi
- # Tell versions [3.59,3.63) of GNU make to not export all variables.
- # Otherwise a system limit (for SysV at least) may be exceeded.
- .NOEXPORT:
- #>+ 2
- KDE_DIST=guide.cel celestia.sln celestia.cfg aclocal.m4 makerelease.bat celestia.vcproj devguide.txt Makefile.in config.h.in makedebug.bat celestia.iss demo.cel configure.in celestia.mak coding-standards.html acinclude.m4 Makefile.am configure controls.txt start.cel
- #>+ 2
- docs-am:
- #>+ 7
- force-reedit:
-
- cd $(srcdir) && $(AUTOMAKE) --gnu
-
- cd $(top_srcdir) && perl admin/am_edit -padmin Makefile.in
- #>+ 21
- clean-bcheck:
- rm -f *.bchecktest.cc *.bchecktest.cc.class a.out
- bcheck: bcheck-recursive
- bcheck-am:
- @for i in ; do
- if test $(srcdir)/$$i -nt $$i.bchecktest.cc; then
- echo "int main() {return 0;}" > $$i.bchecktest.cc ;
- echo "#include "$$i"" >> $$i.bchecktest.cc ;
- echo "$$i";
- if ! $(CXX) $(DEFS) -I. -I$(srcdir) -I$(top_builddir) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(CXXFLAGS) $(KDE_CXXFLAGS) --dump-class-hierarchy -c $$i.bchecktest.cc; then
- rm -f $$i.bchecktest.cc; exit 1;
- fi ;
- echo "" >> $$i.bchecktest.cc.class;
- perl $(top_srcdir)/admin/bcheck.pl $$i.bchecktest.cc.class || { rm -f $$i.bchecktest.cc; exit 1; };
- rm -f a.out;
- fi ;
- done
- #>+ 3
- final:
- $(MAKE) all-am
- #>+ 3
- final-install:
- $(MAKE) install-am
- #>+ 3
- no-final:
- $(MAKE) all-am
- #>+ 3
- no-final-install:
- $(MAKE) install-am
- #>+ 3
- kde-rpo-clean:
- -rm -f *.rpo
- #>+ 3
- nmcheck:
- nmcheck-am: nmcheck