copyi.asm
上传用户:qaz666999
上传日期:2022-08-06
资源大小:2570k
文件大小:4k
- dnl PowerPC-32/VMX and PowerPC-64/VMX mpn_copyi.
- dnl Copyright 2006 Free Software Foundation, Inc.
- dnl This file is part of the GNU MP Library.
- dnl The GNU MP Library is free software; you can redistribute it and/or modify
- dnl it under the terms of the GNU Lesser General Public License as published
- dnl by the Free Software Foundation; either version 3 of the License, or (at
- dnl your option) any later version.
- dnl The GNU MP Library is distributed in the hope that it will be useful, but
- dnl WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- dnl or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public
- dnl License for more details.
- dnl You should have received a copy of the GNU Lesser General Public License
- dnl along with the GNU MP Library. If not, see http://www.gnu.org/licenses/.
- include(`../config.m4')
- C 16-byte coaligned unaligned
- C cycles/limb cycles/limb
- C 7400,7410 (G4): 0.5 0.64
- C 744x,745x (G4+): 0.75 0.82
- C 970 (G5): 0.78 1.02 (64-bit limbs)
- C STATUS
- C * Works for all sizes and alignments.
- C TODO
- C * Optimize unaligned case. Some basic tests with 2-way and 4-way unrolling
- C indicate that we can reach 0.56 c/l for 7400, 0.75 c/l for 745x, and 0.80
- C c/l for 970.
- C * Consider using VMX instructions also for head and tail, by using some
- C read-modify-write tricks.
- C * The VMX code is used from the smallest sizes it handles, but measurements
- C show a large speed bump at the cutoff points. Small copying (perhaps
- C using some read-modify-write technique) should be optimized.
- C * Make a mpn_com based on this code.
- define(`GMP_LIMB_BYTES', eval(GMP_LIMB_BITS/8))
- define(`LIMBS_PER_VR', eval(16/GMP_LIMB_BYTES))
- define(`LIMBS_PER_2VR', eval(32/GMP_LIMB_BYTES))
- ifelse(GMP_LIMB_BITS,32,`
- define(`LIMB32',` $1')
- define(`LIMB64',`')
- ',`
- define(`LIMB32',`')
- define(`LIMB64',` $1')
- ')
- C INPUT PARAMETERS
- define(`rp', `r3')
- define(`up', `r4')
- define(`n', `r5')
- define(`us', `v4')
- ASM_START()
- PROLOGUE(mpn_copyi)
- LIMB32(`cmpi cr7, n, 11 ')
- LIMB64(`cmpdi cr7, n, 5 ')
- bge cr7, L(big)
- or. r0, n, n
- beqlr cr0
- C Handle small cases with plain operations
- mtctr n
- L(topS):
- LIMB32(`lwz r0, 0(up) ')
- LIMB64(`ld r0, 0(up) ')
- addi up, up, GMP_LIMB_BYTES
- LIMB32(`stw r0, 0(rp) ')
- LIMB64(`std r0, 0(rp) ')
- addi rp, rp, GMP_LIMB_BYTES
- bdnz L(topS)
- blr
- C Handle large cases with VMX operations
- L(big):
- mfspr r12, 256
- oris r0, r12, 0xf800 C Set VRSAVE bit 0-4
- mtspr 256, r0
- LIMB32(`rlwinm. r7, rp, 30,30,31') C (rp >> 2) mod 4
- LIMB64(`rlwinm. r7, rp, 29,31,31') C (rp >> 3) mod 2
- beq L(rp_aligned)
- subfic r7, r7, LIMBS_PER_VR
- subf n, r7, n
- L(top0):
- LIMB32(`lwz r0, 0(up) ')
- LIMB64(`ld r0, 0(up) ')
- addi up, up, GMP_LIMB_BYTES
- LIMB32(`addic. r7, r7, -1 ')
- LIMB32(`stw r0, 0(rp) ')
- LIMB64(`std r0, 0(rp) ')
- addi rp, rp, GMP_LIMB_BYTES
- LIMB32(`bne L(top0) ')
- L(rp_aligned):
- LIMB32(`rlwinm. r0, up, 30,30,31') C (up >> 2) mod 4
- LIMB64(`rlwinm. r0, up, 29,31,31') C (up >> 3) mod 2
- LIMB64(`srdi r7, n, 2 ') C loop count corresponding to n
- LIMB32(`srwi r7, n, 3 ') C loop count corresponding to n
- mtctr r7 C copy n to count register
- li r10, 16
- beq L(up_aligned)
- lvsl us, 0, up
- LIMB32(`andi. r0, n, 0x4 ')
- LIMB64(`andi. r0, n, 0x2 ')
- beq L(1)
- lvx v0, 0, up
- lvx v2, r10, up
- vperm v3, v0, v2, us
- stvx v3, 0, rp
- addi up, up, 32
- addi rp, rp, 16
- b L(lpu)
- L(1): lvx v2, 0, up
- addi up, up, 16
- b L(lpu)
- ALIGN(32)
- L(lpu): lvx v0, 0, up
- vperm v3, v2, v0, us
- stvx v3, 0, rp
- lvx v2, r10, up
- addi up, up, 32
- vperm v3, v0, v2, us
- stvx v3, r10, rp
- addi rp, rp, 32
- bdnz L(lpu)
- addi up, up, -16
- b L(tail)
- L(up_aligned):
- LIMB32(`andi. r0, n, 0x4 ')
- LIMB64(`andi. r0, n, 0x2 ')
- beq L(lpa)
- lvx v0, 0, up
- stvx v0, 0, rp
- addi up, up, 16
- addi rp, rp, 16
- b L(lpa)
- ALIGN(32)
- L(lpa): lvx v0, 0, up
- lvx v1, r10, up
- addi up, up, 32
- nop
- stvx v0, 0, rp
- stvx v1, r10, rp
- addi rp, rp, 32
- bdnz L(lpa)
- L(tail):
- LIMB32(`rlwinm. r7, n, 0,30,31 ') C r7 = n mod 4
- LIMB64(`rlwinm. r7, n, 0,31,31 ') C r7 = n mod 2
- beq L(ret)
- LIMB32(`li r10, 0 ')
- L(top2):
- LIMB32(`lwzx r0, r10, up ')
- LIMB64(`ld r0, 0(up) ')
- LIMB32(`addic. r7, r7, -1 ')
- LIMB32(`stwx r0, r10, rp ')
- LIMB64(`std r0, 0(rp) ')
- LIMB32(`addi r10, r10, GMP_LIMB_BYTES')
- LIMB32(`bne L(top2) ')
- L(ret): mtspr 256, r12
- blr
- EPILOGUE()