JwaBugCodes.pas
资源名称:win32api.zip [点击查看]
上传用户:davidchvip
上传日期:2009-07-28
资源大小:1749k
文件大小:60k
源码类别:
Windows编程
开发平台:
Delphi
- {******************************************************************************}
- { }
- { NT Bug Codes API interface Unit for Object Pascal }
- { }
- { Portions created by Microsoft are Copyright (C) 1995-2001 Microsoft }
- { Corporation. All Rights Reserved. }
- { }
- { The original file is: bugcodes.h, released June 2000. The original Pascal }
- { code is: BugCodes.pas, released December 2000. The initial developer of the }
- { Pascal code is Marcel van Brakel (brakelm@chello.nl). }
- { }
- { Portions created by Marcel van Brakel are Copyright (C) 1999-2001 }
- { Marcel van Brakel. All Rights Reserved. }
- { }
- { Obtained through: Joint Endeavour of Delphi Innovators (Project JEDI) }
- { }
- { You may retrieve the latest version of this file at the Project JEDI home }
- { page, located at http://delphi-jedi.org or my personal homepage located at }
- { http://members.chello.nl/m.vanbrakel2 }
- { }
- { The contents of this file are used with permission, subject to the Mozilla }
- { Public License Version 1.1 (the "License"); you may not use this file except }
- { in compliance with the License. You may obtain a copy of the License at }
- { http://www.mozilla.org/MPL/MPL-1.1.html }
- { }
- { Software distributed under the License is distributed on an "AS IS" basis, }
- { WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for }
- { the specific language governing rights and limitations under the License. }
- { }
- { Alternatively, the contents of this file may be used under the terms of the }
- { GNU Lesser General Public License (the "LGPL License"), in which case the }
- { provisions of the LGPL License are applicable instead of those above. }
- { If you wish to allow use of your version of this file only under the terms }
- { of the LGPL License and not to allow others to use your version of this file }
- { under the MPL, indicate your decision by deleting the provisions above and }
- { replace them with the notice and other provisions required by the LGPL }
- { License. If you do not delete the provisions above, a recipient may use }
- { your version of this file under either the MPL or the LGPL License. }
- { }
- { For more information about the LGPL: http://www.gnu.org/copyleft/lesser.html }
- { }
- {******************************************************************************}
- unit JwaBugCodes;
- {$WEAKPACKAGEUNIT}
- {$HPPEMIT ''}
- {$HPPEMIT '#include "bugcodes.h"'}
- {$HPPEMIT ''}
- {$I WINDEFINES.INC}
- interface
- uses
- JwaWinType;
- {$I WINDEFINES.INC}
- //
- // Values are 32 bit values layed out as follows:
- //
- // 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
- // 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
- // +---+-+-+-----------------------+-------------------------------+
- // |Sev|C|R| Facility | Code |
- // +---+-+-+-----------------------+-------------------------------+
- //
- // where
- //
- // Sev - is the severity code
- //
- // 00 - Success
- // 01 - Informational
- // 10 - Warning
- // 11 - Error
- //
- // C - is the Customer code flag
- //
- // R - is a reserved bit
- //
- // Facility - is the facility code
- //
- // Code - is the facility's status code
- //
- //
- // Define the facility codes
- //
- //
- // Define the severity codes
- //
- const
- //
- // MessageId: APC_INDEX_MISMATCH
- //
- // MessageText:
- //
- // APC_INDEX_MISMATCH
- //
- APC_INDEX_MISMATCH = ULONG($00000001);
- {$EXTERNALSYM APC_INDEX_MISMATCH}
- //
- // MessageId: DEVICE_QUEUE_NOT_BUSY
- //
- // MessageText:
- //
- // DEVICE_QUEUE_NOT_BUSY
- //
- DEVICE_QUEUE_NOT_BUSY = ULONG($00000002);
- {$EXTERNALSYM DEVICE_QUEUE_NOT_BUSY}
- //
- // MessageId: INVALID_AFFINITY_SET
- //
- // MessageText:
- //
- // INVALID_AFFINITY_SET
- //
- INVALID_AFFINITY_SET = ULONG($00000003);
- {$EXTERNALSYM INVALID_AFFINITY_SET}
- //
- // MessageId: INVALID_DATA_ACCESS_TRAP
- //
- // MessageText:
- //
- // INVALID_DATA_ACCESS_TRAP
- //
- INVALID_DATA_ACCESS_TRAP = ULONG($00000004);
- {$EXTERNALSYM INVALID_DATA_ACCESS_TRAP}
- //
- // MessageId: INVALID_PROCESS_ATTACH_ATTEMPT
- //
- // MessageText:
- //
- // INVALID_PROCESS_ATTACH_ATTEMPT
- //
- INVALID_PROCESS_ATTACH_ATTEMPT = ULONG($00000005);
- {$EXTERNALSYM INVALID_PROCESS_ATTACH_ATTEMPT}
- //
- // MessageId: INVALID_PROCESS_DETACH_ATTEMPT
- //
- // MessageText:
- //
- // INVALID_PROCESS_DETACH_ATTEMPT
- //
- INVALID_PROCESS_DETACH_ATTEMPT = ULONG($00000006);
- {$EXTERNALSYM INVALID_PROCESS_DETACH_ATTEMPT}
- //
- // MessageId: INVALID_SOFTWARE_INTERRUPT
- //
- // MessageText:
- //
- // INVALID_SOFTWARE_INTERRUPT
- //
- INVALID_SOFTWARE_INTERRUPT = ULONG($00000007);
- {$EXTERNALSYM INVALID_SOFTWARE_INTERRUPT}
- //
- // MessageId: IRQL_NOT_DISPATCH_LEVEL
- //
- // MessageText:
- //
- // IRQL_NOT_DISPATCH_LEVEL
- //
- IRQL_NOT_DISPATCH_LEVEL = ULONG($00000008);
- {$EXTERNALSYM IRQL_NOT_DISPATCH_LEVEL}
- //
- // MessageId: IRQL_NOT_GREATER_OR_EQUAL
- //
- // MessageText:
- //
- // IRQL_NOT_GREATER_OR_EQUAL
- //
- IRQL_NOT_GREATER_OR_EQUAL = ULONG($00000009);
- {$EXTERNALSYM IRQL_NOT_GREATER_OR_EQUAL}
- //
- // MessageId: IRQL_NOT_LESS_OR_EQUAL
- //
- // MessageText:
- //
- // IRQL_NOT_LESS_OR_EQUAL
- //
- IRQL_NOT_LESS_OR_EQUAL = ULONG($0000000A);
- {$EXTERNALSYM IRQL_NOT_LESS_OR_EQUAL}
- //
- // MessageId: NO_EXCEPTION_HANDLING_SUPPORT
- //
- // MessageText:
- //
- // NO_EXCEPTION_HANDLING_SUPPORT
- //
- NO_EXCEPTION_HANDLING_SUPPORT = ULONG($0000000B);
- {$EXTERNALSYM NO_EXCEPTION_HANDLING_SUPPORT}
- //
- // MessageId: MAXIMUM_WAIT_OBJECTS_EXCEEDED
- //
- // MessageText:
- //
- // MAXIMUM_WAIT_OBJECTS_EXCEEDED
- //
- MAXIMUM_WAIT_OBJECTS_EXCEEDED = ULONG($0000000C);
- {$EXTERNALSYM MAXIMUM_WAIT_OBJECTS_EXCEEDED}
- //
- // MessageId: MUTEX_LEVEL_NUMBER_VIOLATION
- //
- // MessageText:
- //
- // MUTEX_LEVEL_NUMBER_VIOLATION
- //
- MUTEX_LEVEL_NUMBER_VIOLATION = ULONG($0000000D);
- {$EXTERNALSYM MUTEX_LEVEL_NUMBER_VIOLATION}
- //
- // MessageId: NO_USER_MODE_CONTEXT
- //
- // MessageText:
- //
- // NO_USER_MODE_CONTEXT
- //
- NO_USER_MODE_CONTEXT = ULONG($0000000E);
- {$EXTERNALSYM NO_USER_MODE_CONTEXT}
- //
- // MessageId: SPIN_LOCK_ALREADY_OWNED
- //
- // MessageText:
- //
- // SPIN_LOCK_ALREADY_OWNED
- //
- SPIN_LOCK_ALREADY_OWNED = ULONG($0000000F);
- {$EXTERNALSYM SPIN_LOCK_ALREADY_OWNED}
- //
- // MessageId: SPIN_LOCK_NOT_OWNED
- //
- // MessageText:
- //
- // SPIN_LOCK_NOT_OWNED
- //
- SPIN_LOCK_NOT_OWNED = ULONG($00000010);
- {$EXTERNALSYM SPIN_LOCK_NOT_OWNED}
- //
- // MessageId: THREAD_NOT_MUTEX_OWNER
- //
- // MessageText:
- //
- // THREAD_NOT_MUTEX_OWNER
- //
- THREAD_NOT_MUTEX_OWNER = ULONG($00000011);
- {$EXTERNALSYM THREAD_NOT_MUTEX_OWNER}
- //
- // MessageId: TRAP_CAUSE_UNKNOWN
- //
- // MessageText:
- //
- // TRAP_CAUSE_UNKNOWN
- //
- TRAP_CAUSE_UNKNOWN = ULONG($00000012);
- {$EXTERNALSYM TRAP_CAUSE_UNKNOWN}
- //
- // MessageId: EMPTY_THREAD_REAPER_LIST
- //
- // MessageText:
- //
- // EMPTY_THREAD_REAPER_LIST
- //
- EMPTY_THREAD_REAPER_LIST = ULONG($00000013);
- {$EXTERNALSYM EMPTY_THREAD_REAPER_LIST}
- //
- // MessageId: CREATE_DELETE_LOCK_NOT_LOCKED
- //
- // MessageText:
- //
- // CREATE_DELETE_LOCK_NOT_LOCKED
- //
- CREATE_DELETE_LOCK_NOT_LOCKED = ULONG($00000014);
- {$EXTERNALSYM CREATE_DELETE_LOCK_NOT_LOCKED}
- //
- // MessageId: LAST_CHANCE_CALLED_FROM_KMODE
- //
- // MessageText:
- //
- // LAST_CHANCE_CALLED_FROM_KMODE
- //
- LAST_CHANCE_CALLED_FROM_KMODE = ULONG($00000015);
- {$EXTERNALSYM LAST_CHANCE_CALLED_FROM_KMODE}
- //
- // MessageId: CID_HANDLE_CREATION
- //
- // MessageText:
- //
- // CID_HANDLE_CREATION
- //
- CID_HANDLE_CREATION = ULONG($00000016);
- {$EXTERNALSYM CID_HANDLE_CREATION}
- //
- // MessageId: CID_HANDLE_DELETION
- //
- // MessageText:
- //
- // CID_HANDLE_DELETION
- //
- CID_HANDLE_DELETION = ULONG($00000017);
- {$EXTERNALSYM CID_HANDLE_DELETION}
- //
- // MessageId: REFERENCE_BY_POINTER
- //
- // MessageText:
- //
- // REFERENCE_BY_POINTER
- //
- REFERENCE_BY_POINTER = ULONG($00000018);
- {$EXTERNALSYM REFERENCE_BY_POINTER}
- //
- // MessageId: BAD_POOL_HEADER
- //
- // MessageText:
- //
- // BAD_POOL_HEADER
- //
- BAD_POOL_HEADER = ULONG($00000019);
- {$EXTERNALSYM BAD_POOL_HEADER}
- //
- // MessageId: MEMORY_MANAGEMENT
- //
- // MessageText:
- //
- // MEMORY_MANAGEMENT
- //
- MEMORY_MANAGEMENT = ULONG($0000001A);
- {$EXTERNALSYM MEMORY_MANAGEMENT}
- //
- // MessageId: PFN_SHARE_COUNT
- //
- // MessageText:
- //
- // PFN_SHARE_COUNT
- //
- PFN_SHARE_COUNT = ULONG($0000001B);
- {$EXTERNALSYM PFN_SHARE_COUNT}
- //
- // MessageId: PFN_REFERENCE_COUNT
- //
- // MessageText:
- //
- // PFN_REFERENCE_COUNT
- //
- PFN_REFERENCE_COUNT = ULONG($0000001C);
- {$EXTERNALSYM PFN_REFERENCE_COUNT}
- //
- // MessageId: NO_SPIN_LOCK_AVAILABLE
- //
- // MessageText:
- //
- // NO_SPIN_LOCK_AVAILABLE
- //
- NO_SPIN_LOCK_AVAILABLE = ULONG($0000001D);
- {$EXTERNALSYM NO_SPIN_LOCK_AVAILABLE}
- //
- // MessageId: KMODE_EXCEPTION_NOT_HANDLED
- //
- // MessageText:
- //
- // KMODE_EXCEPTION_NOT_HANDLED
- //
- KMODE_EXCEPTION_NOT_HANDLED = ULONG($0000001E);
- {$EXTERNALSYM KMODE_EXCEPTION_NOT_HANDLED}
- //
- // MessageId: SHARED_RESOURCE_CONV_ERROR
- //
- // MessageText:
- //
- // SHARED_RESOURCE_CONV_ERROR
- //
- SHARED_RESOURCE_CONV_ERROR = ULONG($0000001F);
- {$EXTERNALSYM SHARED_RESOURCE_CONV_ERROR}
- //
- // MessageId: KERNEL_APC_PENDING_DURING_EXIT
- //
- // MessageText:
- //
- // KERNEL_APC_PENDING_DURING_EXIT
- //
- KERNEL_APC_PENDING_DURING_EXIT = ULONG($00000020);
- {$EXTERNALSYM KERNEL_APC_PENDING_DURING_EXIT}
- //
- // MessageId: QUOTA_UNDERFLOW
- //
- // MessageText:
- //
- // QUOTA_UNDERFLOW
- //
- QUOTA_UNDERFLOW = ULONG($00000021);
- {$EXTERNALSYM QUOTA_UNDERFLOW}
- //
- // MessageId: FILE_SYSTEM
- //
- // MessageText:
- //
- // FILE_SYSTEM
- //
- FILE_SYSTEM = ULONG($00000022);
- {$EXTERNALSYM FILE_SYSTEM}
- //
- // MessageId: FAT_FILE_SYSTEM
- //
- // MessageText:
- //
- // FAT_FILE_SYSTEM
- //
- FAT_FILE_SYSTEM = ULONG($00000023);
- {$EXTERNALSYM FAT_FILE_SYSTEM}
- //
- // MessageId: NTFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // NTFS_FILE_SYSTEM
- //
- NTFS_FILE_SYSTEM = ULONG($00000024);
- {$EXTERNALSYM NTFS_FILE_SYSTEM}
- //
- // MessageId: NPFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // NPFS_FILE_SYSTEM
- //
- NPFS_FILE_SYSTEM = ULONG($00000025);
- {$EXTERNALSYM NPFS_FILE_SYSTEM}
- //
- // MessageId: CDFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // CDFS_FILE_SYSTEM
- //
- CDFS_FILE_SYSTEM = ULONG($00000026);
- {$EXTERNALSYM CDFS_FILE_SYSTEM}
- //
- // MessageId: RDR_FILE_SYSTEM
- //
- // MessageText:
- //
- // RDR_FILE_SYSTEM
- //
- RDR_FILE_SYSTEM = ULONG($00000027);
- {$EXTERNALSYM RDR_FILE_SYSTEM}
- //
- // MessageId: CORRUPT_ACCESS_TOKEN
- //
- // MessageText:
- //
- // CORRUPT_ACCESS_TOKEN
- //
- CORRUPT_ACCESS_TOKEN = ULONG($00000028);
- {$EXTERNALSYM CORRUPT_ACCESS_TOKEN}
- //
- // MessageId: SECURITY_SYSTEM
- //
- // MessageText:
- //
- // SECURITY_SYSTEM
- //
- SECURITY_SYSTEM = ULONG($00000029);
- {$EXTERNALSYM SECURITY_SYSTEM}
- //
- // MessageId: INCONSISTENT_IRP
- //
- // MessageText:
- //
- // INCONSISTENT_IRP
- //
- INCONSISTENT_IRP = ULONG($0000002A);
- {$EXTERNALSYM INCONSISTENT_IRP}
- //
- // MessageId: PANIC_STACK_SWITCH
- //
- // MessageText:
- //
- // PANIC_STACK_SWITCH
- //
- PANIC_STACK_SWITCH = ULONG($0000002B);
- {$EXTERNALSYM PANIC_STACK_SWITCH}
- //
- // MessageId: PORT_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // PORT_DRIVER_INTERNAL
- //
- PORT_DRIVER_INTERNAL = ULONG($0000002C);
- {$EXTERNALSYM PORT_DRIVER_INTERNAL}
- //
- // MessageId: SCSI_DISK_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // SCSI_DISK_DRIVER_INTERNAL
- //
- SCSI_DISK_DRIVER_INTERNAL = ULONG($0000002D);
- {$EXTERNALSYM SCSI_DISK_DRIVER_INTERNAL}
- //
- // MessageId: DATA_BUS_ERROR
- //
- // MessageText:
- //
- // DATA_BUS_ERROR
- //
- DATA_BUS_ERROR = ULONG($0000002E);
- {$EXTERNALSYM DATA_BUS_ERROR}
- //
- // MessageId: INSTRUCTION_BUS_ERROR
- //
- // MessageText:
- //
- // INSTRUCTION_BUS_ERROR
- //
- INSTRUCTION_BUS_ERROR = ULONG($0000002F);
- {$EXTERNALSYM INSTRUCTION_BUS_ERROR}
- //
- // MessageId: SET_OF_INVALID_CONTEXT
- //
- // MessageText:
- //
- // SET_OF_INVALID_CONTEXT
- //
- SET_OF_INVALID_CONTEXT = ULONG($00000030);
- {$EXTERNALSYM SET_OF_INVALID_CONTEXT}
- //
- // MessageId: PHASE0_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PHASE0_INITIALIZATION_FAILED
- //
- PHASE0_INITIALIZATION_FAILED = ULONG($00000031);
- {$EXTERNALSYM PHASE0_INITIALIZATION_FAILED}
- //
- // MessageId: PHASE1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PHASE1_INITIALIZATION_FAILED
- //
- PHASE1_INITIALIZATION_FAILED = ULONG($00000032);
- {$EXTERNALSYM PHASE1_INITIALIZATION_FAILED}
- //
- // MessageId: UNEXPECTED_INITIALIZATION_CALL
- //
- // MessageText:
- //
- // UNEXPECTED_INITIALIZATION_CALL
- //
- UNEXPECTED_INITIALIZATION_CALL = ULONG($00000033);
- {$EXTERNALSYM UNEXPECTED_INITIALIZATION_CALL}
- //
- // MessageId: CACHE_MANAGER
- //
- // MessageText:
- //
- // CACHE_MANAGER
- //
- CACHE_MANAGER = ULONG($00000034);
- {$EXTERNALSYM CACHE_MANAGER}
- //
- // MessageId: NO_MORE_IRP_STACK_LOCATIONS
- //
- // MessageText:
- //
- // NO_MORE_IRP_STACK_LOCATIONS
- //
- NO_MORE_IRP_STACK_LOCATIONS = ULONG($00000035);
- {$EXTERNALSYM NO_MORE_IRP_STACK_LOCATIONS}
- //
- // MessageId: DEVICE_REFERENCE_COUNT_NOT_ZERO
- //
- // MessageText:
- //
- // DEVICE_REFERENCE_COUNT_NOT_ZERO
- //
- DEVICE_REFERENCE_COUNT_NOT_ZERO = ULONG($00000036);
- {$EXTERNALSYM DEVICE_REFERENCE_COUNT_NOT_ZERO}
- //
- // MessageId: FLOPPY_INTERNAL_ERROR
- //
- // MessageText:
- //
- // FLOPPY_INTERNAL_ERROR
- //
- FLOPPY_INTERNAL_ERROR = ULONG($00000037);
- {$EXTERNALSYM FLOPPY_INTERNAL_ERROR}
- //
- // MessageId: SERIAL_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // SERIAL_DRIVER_INTERNAL
- //
- SERIAL_DRIVER_INTERNAL = ULONG($00000038);
- {$EXTERNALSYM SERIAL_DRIVER_INTERNAL}
- //
- // MessageId: SYSTEM_EXIT_OWNED_MUTEX
- //
- // MessageText:
- //
- // SYSTEM_EXIT_OWNED_MUTEX
- //
- SYSTEM_EXIT_OWNED_MUTEX = ULONG($00000039);
- {$EXTERNALSYM SYSTEM_EXIT_OWNED_MUTEX}
- //
- // MessageId: SYSTEM_UNWIND_PREVIOUS_USER
- //
- // MessageText:
- //
- // SYSTEM_UNWIND_PREVIOUS_USER
- //
- SYSTEM_UNWIND_PREVIOUS_USER = ULONG($0000003A);
- {$EXTERNALSYM SYSTEM_UNWIND_PREVIOUS_USER}
- //
- // MessageId: SYSTEM_SERVICE_EXCEPTION
- //
- // MessageText:
- //
- // SYSTEM_SERVICE_EXCEPTION
- //
- SYSTEM_SERVICE_EXCEPTION = ULONG($0000003B);
- {$EXTERNALSYM SYSTEM_SERVICE_EXCEPTION}
- //
- // MessageId: INTERRUPT_UNWIND_ATTEMPTED
- //
- // MessageText:
- //
- // INTERRUPT_UNWIND_ATTEMPTED
- //
- INTERRUPT_UNWIND_ATTEMPTED = ULONG($0000003C);
- {$EXTERNALSYM INTERRUPT_UNWIND_ATTEMPTED}
- //
- // MessageId: INTERRUPT_EXCEPTION_NOT_HANDLED
- //
- // MessageText:
- //
- // INTERRUPT_EXCEPTION_NOT_HANDLED
- //
- INTERRUPT_EXCEPTION_NOT_HANDLED = ULONG($0000003D);
- {$EXTERNALSYM INTERRUPT_EXCEPTION_NOT_HANDLED}
- //
- // MessageId: MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
- //
- // MessageText:
- //
- // MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED
- //
- MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED = ULONG($0000003E);
- {$EXTERNALSYM MULTIPROCESSOR_CONFIGURATION_NOT_SUPPORTED}
- //
- // MessageId: NO_MORE_SYSTEM_PTES
- //
- // MessageText:
- //
- // NO_MORE_SYSTEM_PTES
- //
- NO_MORE_SYSTEM_PTES = ULONG($0000003F);
- {$EXTERNALSYM NO_MORE_SYSTEM_PTES}
- //
- // MessageId: TARGET_MDL_TOO_SMALL
- //
- // MessageText:
- //
- // TARGET_MDL_TOO_SMALL
- //
- TARGET_MDL_TOO_SMALL = ULONG($00000040);
- {$EXTERNALSYM TARGET_MDL_TOO_SMALL}
- //
- // MessageId: MUST_SUCCEED_POOL_EMPTY
- //
- // MessageText:
- //
- // MUST_SUCCEED_POOL_EMPTY
- //
- MUST_SUCCEED_POOL_EMPTY = ULONG($00000041);
- {$EXTERNALSYM MUST_SUCCEED_POOL_EMPTY}
- //
- // MessageId: ATDISK_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // ATDISK_DRIVER_INTERNAL
- //
- ATDISK_DRIVER_INTERNAL = ULONG($00000042);
- {$EXTERNALSYM ATDISK_DRIVER_INTERNAL}
- //
- // MessageId: NO_SUCH_PARTITION
- //
- // MessageText:
- //
- // NO_SUCH_PARTITION
- //
- NO_SUCH_PARTITION = ULONG($00000043);
- {$EXTERNALSYM NO_SUCH_PARTITION}
- //
- // MessageId: MULTIPLE_IRP_COMPLETE_REQUESTS
- //
- // MessageText:
- //
- // MULTIPLE_IRP_COMPLETE_REQUESTS
- //
- MULTIPLE_IRP_COMPLETE_REQUESTS = ULONG($00000044);
- {$EXTERNALSYM MULTIPLE_IRP_COMPLETE_REQUESTS}
- //
- // MessageId: INSUFFICIENT_SYSTEM_MAP_REGS
- //
- // MessageText:
- //
- // INSUFFICIENT_SYSTEM_MAP_REGS
- //
- INSUFFICIENT_SYSTEM_MAP_REGS = ULONG($00000045);
- {$EXTERNALSYM INSUFFICIENT_SYSTEM_MAP_REGS}
- //
- // MessageId: DEREF_UNKNOWN_LOGON_SESSION
- //
- // MessageText:
- //
- // DEREF_UNKNOWN_LOGON_SESSION
- //
- DEREF_UNKNOWN_LOGON_SESSION = ULONG($00000046);
- {$EXTERNALSYM DEREF_UNKNOWN_LOGON_SESSION}
- //
- // MessageId: REF_UNKNOWN_LOGON_SESSION
- //
- // MessageText:
- //
- // REF_UNKNOWN_LOGON_SESSION
- //
- REF_UNKNOWN_LOGON_SESSION = ULONG($00000047);
- {$EXTERNALSYM REF_UNKNOWN_LOGON_SESSION}
- //
- // MessageId: CANCEL_STATE_IN_COMPLETED_IRP
- //
- // MessageText:
- //
- // CANCEL_STATE_IN_COMPLETED_IRP
- //
- CANCEL_STATE_IN_COMPLETED_IRP = ULONG($00000048);
- {$EXTERNALSYM CANCEL_STATE_IN_COMPLETED_IRP}
- //
- // MessageId: PAGE_FAULT_WITH_INTERRUPTS_OFF
- //
- // MessageText:
- //
- // PAGE_FAULT_WITH_INTERRUPTS_OFF
- //
- PAGE_FAULT_WITH_INTERRUPTS_OFF = ULONG($00000049);
- {$EXTERNALSYM PAGE_FAULT_WITH_INTERRUPTS_OFF}
- //
- // MessageId: IRQL_GT_ZERO_AT_SYSTEM_SERVICE
- //
- // MessageText:
- //
- // IRQL_GT_ZERO_AT_SYSTEM_SERVICE
- //
- IRQL_GT_ZERO_AT_SYSTEM_SERVICE = ULONG($0000004A);
- {$EXTERNALSYM IRQL_GT_ZERO_AT_SYSTEM_SERVICE}
- //
- // MessageId: STREAMS_INTERNAL_ERROR
- //
- // MessageText:
- //
- // STREAMS_INTERNAL_ERROR
- //
- STREAMS_INTERNAL_ERROR = ULONG($0000004B);
- {$EXTERNALSYM STREAMS_INTERNAL_ERROR}
- //
- // MessageId: FATAL_UNHANDLED_HARD_ERROR
- //
- // MessageText:
- //
- // FATAL_UNHANDLED_HARD_ERROR
- //
- FATAL_UNHANDLED_HARD_ERROR = ULONG($0000004C);
- {$EXTERNALSYM FATAL_UNHANDLED_HARD_ERROR}
- //
- // MessageId: NO_PAGES_AVAILABLE
- //
- // MessageText:
- //
- // NO_PAGES_AVAILABLE
- //
- NO_PAGES_AVAILABLE = ULONG($0000004D);
- {$EXTERNALSYM NO_PAGES_AVAILABLE}
- //
- // MessageId: PFN_LIST_CORRUPT
- //
- // MessageText:
- //
- // PFN_LIST_CORRUPT
- //
- PFN_LIST_CORRUPT = ULONG($0000004E);
- {$EXTERNALSYM PFN_LIST_CORRUPT}
- //
- // MessageId: NDIS_INTERNAL_ERROR
- //
- // MessageText:
- //
- // NDIS_INTERNAL_ERROR
- //
- NDIS_INTERNAL_ERROR = ULONG($0000004F);
- {$EXTERNALSYM NDIS_INTERNAL_ERROR}
- //
- // MessageId: PAGE_FAULT_IN_NONPAGED_AREA
- //
- // MessageText:
- //
- // PAGE_FAULT_IN_NONPAGED_AREA
- //
- PAGE_FAULT_IN_NONPAGED_AREA = ULONG($00000050);
- {$EXTERNALSYM PAGE_FAULT_IN_NONPAGED_AREA}
- //
- // MessageId: REGISTRY_ERROR
- //
- // MessageText:
- //
- // REGISTRY_ERROR
- //
- REGISTRY_ERROR = ULONG($00000051);
- {$EXTERNALSYM REGISTRY_ERROR}
- //
- // MessageId: MAILSLOT_FILE_SYSTEM
- //
- // MessageText:
- //
- // MAILSLOT_FILE_SYSTEM
- //
- MAILSLOT_FILE_SYSTEM = ULONG($00000052);
- {$EXTERNALSYM MAILSLOT_FILE_SYSTEM}
- //
- // MessageId: NO_BOOT_DEVICE
- //
- // MessageText:
- //
- // NO_BOOT_DEVICE
- //
- NO_BOOT_DEVICE = ULONG($00000053);
- {$EXTERNALSYM NO_BOOT_DEVICE}
- //
- // MessageId: LM_SERVER_INTERNAL_ERROR
- //
- // MessageText:
- //
- // LM_SERVER_INTERNAL_ERROR
- //
- LM_SERVER_INTERNAL_ERROR = ULONG($00000054);
- {$EXTERNALSYM LM_SERVER_INTERNAL_ERROR}
- //
- // MessageId: DATA_COHERENCY_EXCEPTION
- //
- // MessageText:
- //
- // DATA_COHERENCY_EXCEPTION
- //
- DATA_COHERENCY_EXCEPTION = ULONG($00000055);
- {$EXTERNALSYM DATA_COHERENCY_EXCEPTION}
- //
- // MessageId: INSTRUCTION_COHERENCY_EXCEPTION
- //
- // MessageText:
- //
- // INSTRUCTION_COHERENCY_EXCEPTION
- //
- INSTRUCTION_COHERENCY_EXCEPTION = ULONG($00000056);
- {$EXTERNALSYM INSTRUCTION_COHERENCY_EXCEPTION}
- //
- // MessageId: XNS_INTERNAL_ERROR
- //
- // MessageText:
- //
- // XNS_INTERNAL_ERROR
- //
- XNS_INTERNAL_ERROR = ULONG($00000057);
- {$EXTERNALSYM XNS_INTERNAL_ERROR}
- //
- // MessageId: FTDISK_INTERNAL_ERROR
- //
- // MessageText:
- //
- // FTDISK_INTERNAL_ERROR
- //
- FTDISK_INTERNAL_ERROR = ULONG($00000058);
- {$EXTERNALSYM FTDISK_INTERNAL_ERROR}
- //
- // MessageId: PINBALL_FILE_SYSTEM
- //
- // MessageText:
- //
- // PINBALL_FILE_SYSTEM
- //
- PINBALL_FILE_SYSTEM = ULONG($00000059);
- {$EXTERNALSYM PINBALL_FILE_SYSTEM}
- //
- // MessageId: CRITICAL_SERVICE_FAILED
- //
- // MessageText:
- //
- // CRITICAL_SERVICE_FAILED
- //
- CRITICAL_SERVICE_FAILED = ULONG($0000005A);
- {$EXTERNALSYM CRITICAL_SERVICE_FAILED}
- //
- // MessageId: SET_ENV_VAR_FAILED
- //
- // MessageText:
- //
- // SET_ENV_VAR_FAILED
- //
- SET_ENV_VAR_FAILED = ULONG($0000005B);
- {$EXTERNALSYM SET_ENV_VAR_FAILED}
- //
- // MessageId: HAL_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // HAL_INITIALIZATION_FAILED
- //
- HAL_INITIALIZATION_FAILED = ULONG($0000005C);
- {$EXTERNALSYM HAL_INITIALIZATION_FAILED}
- //
- // MessageId: UNSUPPORTED_PROCESSOR
- //
- // MessageText:
- //
- // UNSUPPORTED_PROCESSOR
- //
- UNSUPPORTED_PROCESSOR = ULONG($0000005D);
- {$EXTERNALSYM UNSUPPORTED_PROCESSOR}
- //
- // MessageId: OBJECT_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // OBJECT_INITIALIZATION_FAILED
- //
- OBJECT_INITIALIZATION_FAILED = ULONG($0000005E);
- {$EXTERNALSYM OBJECT_INITIALIZATION_FAILED}
- //
- // MessageId: SECURITY_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SECURITY_INITIALIZATION_FAILED
- //
- SECURITY_INITIALIZATION_FAILED = ULONG($0000005F);
- {$EXTERNALSYM SECURITY_INITIALIZATION_FAILED}
- //
- // MessageId: PROCESS_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PROCESS_INITIALIZATION_FAILED
- //
- PROCESS_INITIALIZATION_FAILED = ULONG($00000060);
- {$EXTERNALSYM PROCESS_INITIALIZATION_FAILED}
- //
- // MessageId: HAL1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // HAL1_INITIALIZATION_FAILED
- //
- HAL1_INITIALIZATION_FAILED = ULONG($00000061);
- {$EXTERNALSYM HAL1_INITIALIZATION_FAILED}
- //
- // MessageId: OBJECT1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // OBJECT1_INITIALIZATION_FAILED
- //
- OBJECT1_INITIALIZATION_FAILED = ULONG($00000062);
- {$EXTERNALSYM OBJECT1_INITIALIZATION_FAILED}
- //
- // MessageId: SECURITY1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SECURITY1_INITIALIZATION_FAILED
- //
- SECURITY1_INITIALIZATION_FAILED = ULONG($00000063);
- {$EXTERNALSYM SECURITY1_INITIALIZATION_FAILED}
- //
- // MessageId: SYMBOLIC_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SYMBOLIC_INITIALIZATION_FAILED
- //
- SYMBOLIC_INITIALIZATION_FAILED = ULONG($00000064);
- {$EXTERNALSYM SYMBOLIC_INITIALIZATION_FAILED}
- //
- // MessageId: MEMORY1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // MEMORY1_INITIALIZATION_FAILED
- //
- MEMORY1_INITIALIZATION_FAILED = ULONG($00000065);
- {$EXTERNALSYM MEMORY1_INITIALIZATION_FAILED}
- //
- // MessageId: CACHE_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // CACHE_INITIALIZATION_FAILED
- //
- CACHE_INITIALIZATION_FAILED = ULONG($00000066);
- {$EXTERNALSYM CACHE_INITIALIZATION_FAILED}
- //
- // MessageId: CONFIG_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // CONFIG_INITIALIZATION_FAILED
- //
- CONFIG_INITIALIZATION_FAILED = ULONG($00000067);
- {$EXTERNALSYM CONFIG_INITIALIZATION_FAILED}
- //
- // MessageId: FILE_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // FILE_INITIALIZATION_FAILED
- //
- FILE_INITIALIZATION_FAILED = ULONG($00000068);
- {$EXTERNALSYM FILE_INITIALIZATION_FAILED}
- //
- // MessageId: IO1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // IO1_INITIALIZATION_FAILED
- //
- IO1_INITIALIZATION_FAILED = ULONG($00000069);
- {$EXTERNALSYM IO1_INITIALIZATION_FAILED}
- //
- // MessageId: LPC_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // LPC_INITIALIZATION_FAILED
- //
- LPC_INITIALIZATION_FAILED = ULONG($0000006A);
- {$EXTERNALSYM LPC_INITIALIZATION_FAILED}
- //
- // MessageId: PROCESS1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PROCESS1_INITIALIZATION_FAILED
- //
- PROCESS1_INITIALIZATION_FAILED = ULONG($0000006B);
- {$EXTERNALSYM PROCESS1_INITIALIZATION_FAILED}
- //
- // MessageId: REFMON_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // REFMON_INITIALIZATION_FAILED
- //
- REFMON_INITIALIZATION_FAILED = ULONG($0000006C);
- {$EXTERNALSYM REFMON_INITIALIZATION_FAILED}
- //
- // MessageId: SESSION1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SESSION1_INITIALIZATION_FAILED
- //
- SESSION1_INITIALIZATION_FAILED = ULONG($0000006D);
- {$EXTERNALSYM SESSION1_INITIALIZATION_FAILED}
- //
- // MessageId: SESSION2_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SESSION2_INITIALIZATION_FAILED
- //
- SESSION2_INITIALIZATION_FAILED = ULONG($0000006E);
- {$EXTERNALSYM SESSION2_INITIALIZATION_FAILED}
- //
- // MessageId: SESSION3_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SESSION3_INITIALIZATION_FAILED
- //
- SESSION3_INITIALIZATION_FAILED = ULONG($0000006F);
- {$EXTERNALSYM SESSION3_INITIALIZATION_FAILED}
- //
- // MessageId: SESSION4_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SESSION4_INITIALIZATION_FAILED
- //
- SESSION4_INITIALIZATION_FAILED = ULONG($00000070);
- {$EXTERNALSYM SESSION4_INITIALIZATION_FAILED}
- //
- // MessageId: SESSION5_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // SESSION5_INITIALIZATION_FAILED
- //
- SESSION5_INITIALIZATION_FAILED = ULONG($00000071);
- {$EXTERNALSYM SESSION5_INITIALIZATION_FAILED}
- //
- // MessageId: ASSIGN_DRIVE_LETTERS_FAILED
- //
- // MessageText:
- //
- // ASSIGN_DRIVE_LETTERS_FAILED
- //
- ASSIGN_DRIVE_LETTERS_FAILED = ULONG($00000072);
- {$EXTERNALSYM ASSIGN_DRIVE_LETTERS_FAILED}
- //
- // MessageId: CONFIG_LIST_FAILED
- //
- // MessageText:
- //
- // CONFIG_LIST_FAILED
- //
- CONFIG_LIST_FAILED = ULONG($00000073);
- {$EXTERNALSYM CONFIG_LIST_FAILED}
- //
- // MessageId: BAD_SYSTEM_CONFIG_INFO
- //
- // MessageText:
- //
- // BAD_SYSTEM_CONFIG_INFO
- //
- BAD_SYSTEM_CONFIG_INFO = ULONG($00000074);
- {$EXTERNALSYM BAD_SYSTEM_CONFIG_INFO}
- //
- // MessageId: CANNOT_WRITE_CONFIGURATION
- //
- // MessageText:
- //
- // CANNOT_WRITE_CONFIGURATION
- //
- CANNOT_WRITE_CONFIGURATION = ULONG($00000075);
- {$EXTERNALSYM CANNOT_WRITE_CONFIGURATION}
- //
- // MessageId: PROCESS_HAS_LOCKED_PAGES
- //
- // MessageText:
- //
- // PROCESS_HAS_LOCKED_PAGES
- //
- PROCESS_HAS_LOCKED_PAGES = ULONG($00000076);
- {$EXTERNALSYM PROCESS_HAS_LOCKED_PAGES}
- //
- // MessageId: KERNEL_STACK_INPAGE_ERROR
- //
- // MessageText:
- //
- // KERNEL_STACK_INPAGE_ERROR
- //
- KERNEL_STACK_INPAGE_ERROR = ULONG($00000077);
- {$EXTERNALSYM KERNEL_STACK_INPAGE_ERROR}
- //
- // MessageId: PHASE0_EXCEPTION
- //
- // MessageText:
- //
- // PHASE0_EXCEPTION
- //
- PHASE0_EXCEPTION = ULONG($00000078);
- {$EXTERNALSYM PHASE0_EXCEPTION}
- //
- // MessageId: MISMATCHED_HAL
- //
- // MessageText:
- //
- // Mismatched kernel and hal image.
- //
- MISMATCHED_HAL = ULONG($00000079);
- {$EXTERNALSYM MISMATCHED_HAL}
- //
- // MessageId: KERNEL_DATA_INPAGE_ERROR
- //
- // MessageText:
- //
- // KERNEL_DATA_INPAGE_ERROR
- //
- KERNEL_DATA_INPAGE_ERROR = ULONG($0000007A);
- {$EXTERNALSYM KERNEL_DATA_INPAGE_ERROR}
- //
- // MessageId: INACCESSIBLE_BOOT_DEVICE
- //
- // MessageText:
- //
- // INACCESSIBLE_BOOT_DEVICE
- //
- INACCESSIBLE_BOOT_DEVICE = ULONG($0000007B);
- {$EXTERNALSYM INACCESSIBLE_BOOT_DEVICE}
- //
- // MessageId: BUGCODE_PSS_MESSAGE
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check to make sure any new hardware or software is properly installed.
- // If this is a new installation, ask your hardware or software manufacturer
- // for any Windows 2000 updates you might need.
- //
- // If problems continue, disable or remove any newly installed hardware
- // or software. Disable BIOS memory options such as caching or shadowing.
- // If you need to use Safe Mode to remove or disable components, restart
- // your computer, press F8 to select Advanced Startup Options, and then
- // select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE = ULONG($0000007C);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE}
- //
- // MessageId: INSTALL_MORE_MEMORY
- //
- // MessageText:
- //
- // INSTALL_MORE_MEMORY
- //
- INSTALL_MORE_MEMORY = ULONG($0000007D);
- {$EXTERNALSYM INSTALL_MORE_MEMORY}
- //
- // MessageId: WINDOWS_NT_BANNER
- //
- // MessageText:
- //
- // Microsoft (R) Windows 2000 (R) Version %hs (Build %u%hs)
- //
- WINDOWS_NT_BANNER = ULONG($4000007E);
- {$EXTERNALSYM WINDOWS_NT_BANNER}
- //
- // MessageId: UNEXPECTED_KERNEL_MODE_TRAP
- //
- // MessageText:
- //
- // UNEXPECTED_KERNEL_MODE_TRAP
- //
- UNEXPECTED_KERNEL_MODE_TRAP = ULONG($0000007F);
- {$EXTERNALSYM UNEXPECTED_KERNEL_MODE_TRAP}
- //
- // MessageId: NMI_HARDWARE_FAILURE
- //
- // MessageText:
- //
- // Hardware malfunction.
- //
- NMI_HARDWARE_FAILURE = ULONG($00000080);
- {$EXTERNALSYM NMI_HARDWARE_FAILURE}
- //
- // MessageId: SPIN_LOCK_INIT_FAILURE
- //
- // MessageText:
- //
- // SPIN_LOCK_INIT_FAILURE
- //
- SPIN_LOCK_INIT_FAILURE = ULONG($00000081);
- {$EXTERNALSYM SPIN_LOCK_INIT_FAILURE}
- //
- // MessageId: DFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // DFS_FILE_SYSTEM
- //
- DFS_FILE_SYSTEM = ULONG($00000082);
- {$EXTERNALSYM DFS_FILE_SYSTEM}
- //
- // MessageId: OFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // OFS_FILE_SYSTEM
- //
- OFS_FILE_SYSTEM = ULONG($00000083);
- {$EXTERNALSYM OFS_FILE_SYSTEM}
- //
- // MessageId: RECOM_DRIVER
- //
- // MessageText:
- //
- // RECOM_DRIVER
- //
- RECOM_DRIVER = ULONG($00000084);
- {$EXTERNALSYM RECOM_DRIVER}
- //
- // MessageId: SETUP_FAILURE
- //
- // MessageText:
- //
- // SETUP_FAILURE
- //
- SETUP_FAILURE = ULONG($00000085);
- {$EXTERNALSYM SETUP_FAILURE}
- //
- // MessageId: AUDIT_FAILURE
- //
- // MessageText:
- //
- // Audit attempt has failed.
- //
- AUDIT_FAILURE = ULONG($00000086);
- {$EXTERNALSYM AUDIT_FAILURE}
- //
- // MessageId: WINDOWS_NT_CSD_STRING
- //
- // MessageText:
- //
- // Service Pack
- //
- WINDOWS_NT_CSD_STRING = ULONG($40000087);
- {$EXTERNALSYM WINDOWS_NT_CSD_STRING}
- //
- // MessageId: WINDOWS_NT_INFO_STRING
- //
- // MessageText:
- //
- // %u System Processor [%u MB Memory] %Z
- //
- WINDOWS_NT_INFO_STRING = ULONG($40000088);
- {$EXTERNALSYM WINDOWS_NT_INFO_STRING}
- //
- // MessageId: WINDOWS_NT_MP_STRING
- //
- // MessageText:
- //
- // MultiProcessor Kernel
- //
- WINDOWS_NT_MP_STRING = ULONG($40000089);
- {$EXTERNALSYM WINDOWS_NT_MP_STRING}
- //
- // MessageId: THREAD_TERMINATE_HELD_MUTEX
- //
- // MessageText:
- //
- // A kernel thread terminated while holding a mutex
- //
- THREAD_TERMINATE_HELD_MUTEX = ULONG($4000008A);
- {$EXTERNALSYM THREAD_TERMINATE_HELD_MUTEX}
- //
- // MessageId: MBR_CHECKSUM_MISMATCH
- //
- // MessageText:
- //
- // This system may be infected with a virus.
- //
- MBR_CHECKSUM_MISMATCH = ULONG($0000008B);
- {$EXTERNALSYM MBR_CHECKSUM_MISMATCH}
- //
- // MessageId: BUGCODE_PSS_CRASH_INIT
- //
- // MessageText:
- //
- // Beginning dump of physical memory
- //
- BUGCODE_PSS_CRASH_INIT = ULONG($0000008C);
- {$EXTERNALSYM BUGCODE_PSS_CRASH_INIT}
- //
- // MessageId: BUGCODE_PSS_CRASH_PROGRESS
- //
- // MessageText:
- //
- // Dumping physical memory to disk
- //
- BUGCODE_PSS_CRASH_PROGRESS = ULONG($0000008D);
- {$EXTERNALSYM BUGCODE_PSS_CRASH_PROGRESS}
- //
- // MessageId: BUGCODE_PSS_CRASH_DONE
- //
- // MessageText:
- //
- // Physical memory dump complete. Contact your system administrator or
- // technical support group.
- //
- BUGCODE_PSS_CRASH_DONE = ULONG($0000008E);
- {$EXTERNALSYM BUGCODE_PSS_CRASH_DONE}
- //
- // MessageId: PP0_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PP0_INITIALIZATION_FAILED
- //
- PP0_INITIALIZATION_FAILED = ULONG($0000008F);
- {$EXTERNALSYM PP0_INITIALIZATION_FAILED}
- //
- // MessageId: PP1_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // PP1_INITIALIZATION_FAILED
- //
- PP1_INITIALIZATION_FAILED = ULONG($00000090);
- {$EXTERNALSYM PP1_INITIALIZATION_FAILED}
- //
- // MessageId: WIN32K_INIT_OR_RIT_FAILURE
- //
- // MessageText:
- //
- // WIN32K_INIT_OR_RIT_FAILURE
- //
- WIN32K_INIT_OR_RIT_FAILURE = ULONG($00000091);
- {$EXTERNALSYM WIN32K_INIT_OR_RIT_FAILURE}
- //
- // MessageId: UP_DRIVER_ON_MP_SYSTEM
- //
- // MessageText:
- //
- // UP_DRIVER_ON_MP_SYSTEM
- //
- UP_DRIVER_ON_MP_SYSTEM = ULONG($00000092);
- {$EXTERNALSYM UP_DRIVER_ON_MP_SYSTEM}
- //
- // MessageId: INVALID_KERNEL_HANDLE
- //
- // MessageText:
- //
- // INVALID_KERNEL_HANDLE
- //
- INVALID_KERNEL_HANDLE = ULONG($00000093);
- {$EXTERNALSYM INVALID_KERNEL_HANDLE}
- //
- // MessageId: KERNEL_STACK_LOCKED_AT_EXIT
- //
- // MessageText:
- //
- // KERNEL_STACK_LOCKED_AT_EXIT
- //
- KERNEL_STACK_LOCKED_AT_EXIT = ULONG($00000094);
- {$EXTERNALSYM KERNEL_STACK_LOCKED_AT_EXIT}
- //
- // MessageId: PNP_INTERNAL_ERROR
- //
- // MessageText:
- //
- // PNP_INTERNAL_ERROR
- //
- PNP_INTERNAL_ERROR = ULONG($00000095);
- {$EXTERNALSYM PNP_INTERNAL_ERROR}
- //
- // MessageId: INVALID_WORK_QUEUE_ITEM
- //
- // MessageText:
- //
- // INVALID_WORK_QUEUE_ITEM
- //
- INVALID_WORK_QUEUE_ITEM = ULONG($00000096);
- {$EXTERNALSYM INVALID_WORK_QUEUE_ITEM}
- //
- // MessageId: BOUND_IMAGE_UNSUPPORTED
- //
- // MessageText:
- //
- // BOUND_IMAGE_UNSUPPORTED
- //
- BOUND_IMAGE_UNSUPPORTED = ULONG($00000097);
- {$EXTERNALSYM BOUND_IMAGE_UNSUPPORTED}
- //
- // MessageId: END_OF_NT_EVALUATION_PERIOD
- //
- // MessageText:
- //
- // END_OF_NT_EVALUATION_PERIOD
- //
- END_OF_NT_EVALUATION_PERIOD = ULONG($00000098);
- {$EXTERNALSYM END_OF_NT_EVALUATION_PERIOD}
- //
- // MessageId: INVALID_REGION_OR_SEGMENT
- //
- // MessageText:
- //
- // INVALID_REGION_OR_SEGMENT
- //
- INVALID_REGION_OR_SEGMENT = ULONG($00000099);
- {$EXTERNALSYM INVALID_REGION_OR_SEGMENT}
- //
- // MessageId: SYSTEM_LICENSE_VIOLATION
- //
- // MessageText:
- //
- // SYSTEM_LICENSE_VIOLATION
- //
- SYSTEM_LICENSE_VIOLATION = ULONG($0000009A);
- {$EXTERNALSYM SYSTEM_LICENSE_VIOLATION}
- //
- // MessageId: UDFS_FILE_SYSTEM
- //
- // MessageText:
- //
- // UDFS_FILE_SYSTEM
- //
- UDFS_FILE_SYSTEM = ULONG($0000009B);
- {$EXTERNALSYM UDFS_FILE_SYSTEM}
- //
- // MessageId: MACHINE_CHECK_EXCEPTION
- //
- // MessageText:
- //
- // MACHINE_CHECK_EXCEPTION
- //
- MACHINE_CHECK_EXCEPTION = ULONG($0000009C);
- {$EXTERNALSYM MACHINE_CHECK_EXCEPTION}
- //
- // MessageId: WINDOWS_NT_INFO_STRING_PLURAL
- //
- // MessageText:
- //
- // %u System Processors [%u MB Memory] %Z
- //
- WINDOWS_NT_INFO_STRING_PLURAL = ULONG($4000009D);
- {$EXTERNALSYM WINDOWS_NT_INFO_STRING_PLURAL}
- //
- // MessageId: WINDOWS_NT_RC_STRING
- //
- // MessageText:
- //
- // RC
- //
- WINDOWS_NT_RC_STRING = ULONG($4000009E);
- {$EXTERNALSYM WINDOWS_NT_RC_STRING}
- //
- // MessageId: DRIVER_POWER_STATE_FAILURE
- //
- // MessageText:
- //
- // DRIVER_POWER_STATE_FAILURE
- //
- DRIVER_POWER_STATE_FAILURE = ULONG($0000009F);
- {$EXTERNALSYM DRIVER_POWER_STATE_FAILURE}
- //
- // MessageId: INTERNAL_POWER_ERROR
- //
- // MessageText:
- //
- // INTERNAL_POWER_ERROR
- //
- INTERNAL_POWER_ERROR = ULONG($000000A0);
- {$EXTERNALSYM INTERNAL_POWER_ERROR}
- //
- // MessageId: PCI_BUS_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // Inconsistency detected in the PCI Bus driver's internal structures.
- //
- PCI_BUS_DRIVER_INTERNAL = ULONG($000000A1);
- {$EXTERNALSYM PCI_BUS_DRIVER_INTERNAL}
- //
- // MessageId: MEMORY_IMAGE_CORRUPT
- //
- // MessageText:
- //
- // A CRC check on the memory range has failed
- //
- MEMORY_IMAGE_CORRUPT = ULONG($000000A2);
- {$EXTERNALSYM MEMORY_IMAGE_CORRUPT}
- //
- // MessageId: ACPI_DRIVER_INTERNAL
- //
- // MessageText:
- //
- // ACPI_DRIVER_INTERNAL
- //
- ACPI_DRIVER_INTERNAL = ULONG($000000A3);
- {$EXTERNALSYM ACPI_DRIVER_INTERNAL}
- //
- // MessageId: CNSS_FILE_SYSTEM_FILTER
- //
- // MessageText:
- //
- // Internal inconsistency while representing
- // Ntfs Structured Storage as a DOCFILE.
- //
- CNSS_FILE_SYSTEM_FILTER = ULONG($000000A4);
- {$EXTERNALSYM CNSS_FILE_SYSTEM_FILTER}
- //
- // MessageId: ACPI_BIOS_ERROR
- //
- // MessageText:
- //
- // The ACPI BIOS in this system is not fully compliant with the ACPI
- // specification. Please read the README.TXT for possible workarounds. You
- // can also contact your system's manufacturer for an updated BIOS, or visit
- // http://www.hardware-update.com to see if a new BIOS is available.
- //
- ACPI_BIOS_ERROR = ULONG($000000A5);
- {$EXTERNALSYM ACPI_BIOS_ERROR}
- //
- // MessageId: FP_EMULATION_ERROR
- //
- // MessageText:
- //
- // FP_EMULATION_ERROR
- //
- FP_EMULATION_ERROR = ULONG($000000A6);
- {$EXTERNALSYM FP_EMULATION_ERROR}
- //
- // MessageId: BAD_EXHANDLE
- //
- // MessageText:
- //
- // BAD_EXHANDLE
- //
- BAD_EXHANDLE = ULONG($000000A7);
- {$EXTERNALSYM BAD_EXHANDLE}
- //
- // MessageId: BOOTING_IN_SAFEMODE_MINIMAL
- //
- // MessageText:
- //
- // The system is booting in safemode - Minimal Services
- //
- BOOTING_IN_SAFEMODE_MINIMAL = ULONG($000000A8);
- {$EXTERNALSYM BOOTING_IN_SAFEMODE_MINIMAL}
- //
- // MessageId: BOOTING_IN_SAFEMODE_NETWORK
- //
- // MessageText:
- //
- // The system is booting in safemode - Minimal Services with Network
- //
- BOOTING_IN_SAFEMODE_NETWORK = ULONG($000000A9);
- {$EXTERNALSYM BOOTING_IN_SAFEMODE_NETWORK}
- //
- // MessageId: BOOTING_IN_SAFEMODE_DSREPAIR
- //
- // MessageText:
- //
- // The system is booting in safemode - Directory Services Repair
- //
- BOOTING_IN_SAFEMODE_DSREPAIR = ULONG($000000AA);
- {$EXTERNALSYM BOOTING_IN_SAFEMODE_DSREPAIR}
- //
- // MessageId: SESSION_HAS_VALID_POOL_ON_EXIT
- //
- // MessageText:
- //
- // SESSION_HAS_VALID_POOL_ON_EXIT
- //
- SESSION_HAS_VALID_POOL_ON_EXIT = ULONG($000000AB);
- {$EXTERNALSYM SESSION_HAS_VALID_POOL_ON_EXIT}
- //
- // MessageId: HAL_MEMORY_ALLOCATION
- //
- // MessageText:
- //
- // Allocate from NonPaged Pool failed for a HAL critical allocation.
- //
- HAL_MEMORY_ALLOCATION = ULONG($000000AC);
- {$EXTERNALSYM HAL_MEMORY_ALLOCATION}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_A
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check to make sure any new hardware or software is properly installed.
- // If this is a new installation, ask your hardware or software manufacturer
- // for any Windows 2000 updates you might need.
- //
- // If problems continue, disable or remove any newly installed hardware
- // or software. Disable BIOS memory options such as caching or shadowing.
- // Check your hard drive to make sure it is properly configured and
- // terminated. If you need to use Safe Mode to remove or disable components,
- // restart your computer, press F8 to select Advanced Startup Options,
- // and then select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_A = ULONG($000000AD);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_A}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_1E
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check to be sure you have adequate disk space. If a driver is
- // identified in the Stop message, disable the driver or check
- // with the manufacturer for driver updates. Try changing video
- // adapters.
- //
- // Check with your hardware vendor for any BIOS updates. Disable
- // BIOS memory options such as caching or shadowing. If you need
- // to use Safe Mode to remove or disable components, restart your
- // computer, press F8 to select Advanced Startup Options, and then
- // select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_1E = ULONG($000000AE);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_1E}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_23
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Disable or uninstall any anti-virus, disk defragmentation
- // or backup utilities. Check your hard drive configuration,
- // and check for any updated drivers. Run CHKDSK /F to check
- // for hard drive corruption, and then restart your computer.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_23 = ULONG($000000AF);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_23}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_2E
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Run system diagnostics supplied by your hardware manufacturer.
- // In particular, run a memory check, and check for faulty or
- // mismatched memory. Try changing video adapters.
- //
- // Check with your hardware vendor for any BIOS updates. Disable
- // BIOS memory options such as caching or shadowing. If you need
- // to use Safe Mode to remove or disable components, restart your
- // computer, press F8 to select Advanced Startup Options, and then
- // select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_2E = ULONG($000000B0);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_2E}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_3F
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Remove any recently installed software including backup
- // utilities or disk-intensive applications.
- //
- // If you need to use Safe Mode to remove or disable components,
- // restart your computer, press F8 to select Advanced Startup
- // Options, and then select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_3F = ULONG($000000B1);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_3F}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_7B
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check for viruses on your computer. Remove any newly installed
- // hard drives or hard drive controllers. Check your hard drive
- // to make sure it is properly configured and terminated.
- // Run CHKDSK /F to check for hard drive corruption, and then
- // restart your computer.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_7B = ULONG($000000B2);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_7B}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_7F
- //
- // MessageText:
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Run a system diagnostic utility supplied by your hardware manufacturer.
- // In particular, run a memory check, and check for faulty or mismatched
- // memory. Try changing video adapters.
- //
- // Disable or remove any newly installed hardware and drivers. Disable or
- // remove any newly installed software. If you need to use Safe Mode to
- // remove or disable components, restart your computer, press F8 to select
- // Advanced Startup Options, and then select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- BUGCODE_PSS_MESSAGE_7F = ULONG($000000B3);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_7F}
- //
- // MessageId: VIDEO_DRIVER_INIT_FAILURE
- //
- // MessageText:
- //
- // The video driver failed to initialize
- //
- VIDEO_DRIVER_INIT_FAILURE = ULONG($000000B4);
- {$EXTERNALSYM VIDEO_DRIVER_INIT_FAILURE}
- //
- // MessageId: BOOTLOG_LOADED
- //
- // MessageText:
- //
- // Loaded driver
- //
- BOOTLOG_LOADED = ULONG($000000B5);
- {$EXTERNALSYM BOOTLOG_LOADED}
- //
- // MessageId: BOOTLOG_NOT_LOADED
- //
- // MessageText:
- //
- // Did not load driver
- //
- BOOTLOG_NOT_LOADED = ULONG($000000B6);
- {$EXTERNALSYM BOOTLOG_NOT_LOADED}
- //
- // MessageId: BOOTLOG_ENABLED
- //
- // MessageText:
- //
- // Boot Logging Enabled
- //
- BOOTLOG_ENABLED = ULONG($000000B7);
- {$EXTERNALSYM BOOTLOG_ENABLED}
- //
- // MessageId: ATTEMPTED_SWITCH_FROM_DPC
- //
- // MessageText:
- //
- // A wait operation, attach process, or yield was attempted from a DPC routine.
- //
- ATTEMPTED_SWITCH_FROM_DPC = ULONG($000000B8);
- {$EXTERNALSYM ATTEMPTED_SWITCH_FROM_DPC}
- //
- // MessageId: CHIPSET_DETECTED_ERROR
- //
- // MessageText:
- //
- // A parity error in the system memory or I/O system was detected.
- //
- CHIPSET_DETECTED_ERROR = ULONG($000000B9);
- {$EXTERNALSYM CHIPSET_DETECTED_ERROR}
- //
- // MessageId: SESSION_HAS_VALID_VIEWS_ON_EXIT
- //
- // MessageText:
- //
- // SESSION_HAS_VALID_VIEWS_ON_EXIT
- //
- SESSION_HAS_VALID_VIEWS_ON_EXIT = ULONG($000000BA);
- {$EXTERNALSYM SESSION_HAS_VALID_VIEWS_ON_EXIT}
- //
- // MessageId: NETWORK_BOOT_INITIALIZATION_FAILED
- //
- // MessageText:
- //
- // An initialization failure occurred while attempting to boot from the network.
- //
- NETWORK_BOOT_INITIALIZATION_FAILED = ULONG($000000BB);
- {$EXTERNALSYM NETWORK_BOOT_INITIALIZATION_FAILED}
- //
- // MessageId: NETWORK_BOOT_DUPLICATE_ADDRESS
- //
- // MessageText:
- //
- // A duplicate IP address was assigned to this machine while attempting to
- // boot from the network.
- //
- NETWORK_BOOT_DUPLICATE_ADDRESS = ULONG($000000BC);
- {$EXTERNALSYM NETWORK_BOOT_DUPLICATE_ADDRESS}
- //
- // MessageId: INVALID_HIBERNATED_STATE
- //
- // MessageText:
- //
- // The hibernated memory image does not match the current hardware configuration.
- //
- INVALID_HIBERNATED_STATE = ULONG($000000BD);
- {$EXTERNALSYM INVALID_HIBERNATED_STATE}
- //
- // MessageId: ATTEMPTED_WRITE_TO_READONLY_MEMORY
- //
- // MessageText:
- //
- // An attempt was made to write to read-only memory.
- //
- ATTEMPTED_WRITE_TO_READONLY_MEMORY = ULONG($000000BE);
- {$EXTERNALSYM ATTEMPTED_WRITE_TO_READONLY_MEMORY}
- //
- // MessageId: MUTEX_ALREADY_OWNED
- //
- // MessageText:
- //
- // MUTEX_ALREADY_OWNED
- //
- MUTEX_ALREADY_OWNED = ULONG($000000BF);
- {$EXTERNALSYM MUTEX_ALREADY_OWNED}
- //
- // MessageId: PCI_CONFIG_SPACE_ACCESS_FAILURE
- //
- // MessageText:
- //
- // An attempt to access PCI configuration space failed.
- //
- PCI_CONFIG_SPACE_ACCESS_FAILURE = ULONG($000000C0);
- {$EXTERNALSYM PCI_CONFIG_SPACE_ACCESS_FAILURE}
- //
- // MessageId: SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
- //
- // MessageText:
- //
- // SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION
- //
- SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION = ULONG($000000C1);
- {$EXTERNALSYM SPECIAL_POOL_DETECTED_MEMORY_CORRUPTION}
- //
- // MessageId: BAD_POOL_CALLER
- //
- // MessageText:
- //
- // BAD_POOL_CALLER
- //
- BAD_POOL_CALLER = ULONG($000000C2);
- {$EXTERNALSYM BAD_POOL_CALLER}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_SIGNATURE
- //
- // MessageText:
- //
- //
- // A system file that is owned by Windows 2000 was replaced by an application
- // running on your system. The operating system detected this and tried to
- // verify the validity of the file's signature. The operating system found that
- // the file signature is not valid and put the original, correct file back
- // so that your operating system will continue to function properly.
- //
- BUGCODE_PSS_MESSAGE_SIGNATURE = ULONG($000000C3);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_SIGNATURE}
- //
- // MessageId: DRIVER_VERIFIER_DETECTED_VIOLATION
- //
- // MessageText:
- //
- //
- // A device driver attempting to corrupt the system has been caught.
- // The faulty driver currently on the kernel stack must be replaced
- // with a working version.
- //
- DRIVER_VERIFIER_DETECTED_VIOLATION = ULONG($000000C4);
- {$EXTERNALSYM DRIVER_VERIFIER_DETECTED_VIOLATION}
- //
- // MessageId: DRIVER_CORRUPTED_EXPOOL
- //
- // MessageText:
- //
- //
- // A device driver has corrupted the executive memory pool.
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check to make sure any new hardware or software is properly installed.
- // If this is a new installation, ask your hardware or software manufacturer
- // for any Windows 2000 updates you might need.
- //
- // Run the driver verifier against any new (or suspect) drivers.
- // If that doesn't reveal the corrupting driver, try enabling special pool.
- // Both of these features are intended to catch the corruption at an earlier
- // point where the offending driver can be identified.
- //
- // If you need to use Safe Mode to remove or disable components,
- // restart your computer, press F8 to select Advanced Startup Options,
- // and then select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- DRIVER_CORRUPTED_EXPOOL = ULONG($000000C5);
- {$EXTERNALSYM DRIVER_CORRUPTED_EXPOOL}
- //
- // MessageId: DRIVER_CAUGHT_MODIFYING_FREED_POOL
- //
- // MessageText:
- //
- //
- // A device driver attempting to corrupt the system has been caught.
- // The faulty driver currently on the kernel stack must be replaced
- // with a working version.
- //
- DRIVER_CAUGHT_MODIFYING_FREED_POOL = ULONG($000000C6);
- {$EXTERNALSYM DRIVER_CAUGHT_MODIFYING_FREED_POOL}
- //
- // MessageId: TIMER_OR_DPC_INVALID
- //
- // MessageText:
- //
- //
- // A kernel timer or DPC was found in memory which must not contain such
- // items. Usually this is memory being freed. This is usually caused by
- // a device driver that has not cleaned up properly before freeing memory.
- //
- TIMER_OR_DPC_INVALID = ULONG($000000C7);
- {$EXTERNALSYM TIMER_OR_DPC_INVALID}
- //
- // MessageId: IRQL_UNEXPECTED_VALUE
- //
- // MessageText:
- //
- //
- // The processor's IRQL is not valid for the currently executing context.
- // This is a software error condition and is usually caused by a device
- // driver changing IRQL and not restoring it to its previous value when
- // it has finished its task.
- //
- IRQL_UNEXPECTED_VALUE = ULONG($000000C8);
- {$EXTERNALSYM IRQL_UNEXPECTED_VALUE}
- //
- // MessageId: DRIVER_VERIFIER_IOMANAGER_VIOLATION
- //
- // MessageText:
- //
- //
- // The IO manager has detected a violation by a driver that is being verified.
- // The faulty driver that is being verified must be debugged and
- // replaced with a working version.
- //
- DRIVER_VERIFIER_IOMANAGER_VIOLATION = ULONG($000000C9);
- {$EXTERNALSYM DRIVER_VERIFIER_IOMANAGER_VIOLATION}
- //
- // MessageId: PNP_DETECTED_FATAL_ERROR
- //
- // MessageText:
- //
- //
- // Plug and Play detected an error most likely caused by a faulty driver.
- //
- PNP_DETECTED_FATAL_ERROR = ULONG($000000CA);
- {$EXTERNALSYM PNP_DETECTED_FATAL_ERROR}
- //
- // MessageId: DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
- //
- // MessageText:
- //
- // DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS
- //
- DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS = ULONG($000000CB);
- {$EXTERNALSYM DRIVER_LEFT_LOCKED_PAGES_IN_PROCESS}
- //
- // MessageId: PAGE_FAULT_IN_FREED_SPECIAL_POOL
- //
- // MessageText:
- //
- //
- // The system is attempting to access memory after it has been freed.
- // This usually indicates a system-driver synchronization issue.
- //
- PAGE_FAULT_IN_FREED_SPECIAL_POOL = ULONG($000000CC);
- {$EXTERNALSYM PAGE_FAULT_IN_FREED_SPECIAL_POOL}
- //
- // MessageId: PAGE_FAULT_BEYOND_END_OF_ALLOCATION
- //
- // MessageText:
- //
- //
- // The system is attempting to access memory beyond the end of the allocation.
- // This usually indicates a system-driver synchronization issue.
- //
- PAGE_FAULT_BEYOND_END_OF_ALLOCATION = ULONG($000000CD);
- {$EXTERNALSYM PAGE_FAULT_BEYOND_END_OF_ALLOCATION}
- //
- // MessageId: DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
- //
- // MessageText:
- //
- // DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS
- //
- DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS = ULONG($000000CE);
- {$EXTERNALSYM DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS}
- //
- // MessageId: TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
- //
- // MessageText:
- //
- // TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE
- //
- TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE = ULONG($000000CF);
- {$EXTERNALSYM TERMINAL_SERVER_DRIVER_MADE_INCORRECT_MEMORY_REFERENCE}
- //
- // MessageId: DRIVER_CORRUPTED_MMPOOL
- //
- // MessageText:
- //
- //
- // A device driver has corrupted the system memory management pool.
- //
- // If this is the first time you've seen this Stop error screen,
- // restart your computer. If this screen appears again, follow
- // these steps:
- //
- // Check to make sure any new hardware or software is properly installed.
- // If this is a new installation, ask your hardware or software manufacturer
- // for any Windows 2000 updates you might need.
- //
- // Run the driver verifier against any new (or suspect) drivers.
- // If that doesn't reveal the corrupting driver, try enabling special pool.
- // Both of these features are intended to catch the corruption at an earlier
- // point where the offending driver can be identified.
- //
- // If you need to use Safe Mode to remove or disable components,
- // restart your computer, press F8 to select Advanced Startup Options,
- // and then select Safe Mode.
- //
- // Refer to your Getting Started manual for more information on
- // troubleshooting Stop errors.
- //
- DRIVER_CORRUPTED_MMPOOL = ULONG($000000D0);
- {$EXTERNALSYM DRIVER_CORRUPTED_MMPOOL}
- //
- // MessageId: DRIVER_IRQL_NOT_LESS_OR_EQUAL
- //
- // MessageText:
- //
- // DRIVER_IRQL_NOT_LESS_OR_EQUAL
- //
- DRIVER_IRQL_NOT_LESS_OR_EQUAL = ULONG($000000D1);
- {$EXTERNALSYM DRIVER_IRQL_NOT_LESS_OR_EQUAL}
- //
- // MessageId: BUGCODE_ID_DRIVER
- //
- // MessageText:
- //
- // This driver may be at fault :
- //
- BUGCODE_ID_DRIVER = ULONG($000000D2);
- {$EXTERNALSYM BUGCODE_ID_DRIVER}
- //
- // MessageId: DRIVER_PORTION_MUST_BE_NONPAGED
- //
- // MessageText:
- //
- // The driver mistakenly marked a part of it's image pagable instead of nonpagable.
- //
- DRIVER_PORTION_MUST_BE_NONPAGED = ULONG($000000D3);
- {$EXTERNALSYM DRIVER_PORTION_MUST_BE_NONPAGED}
- //
- // MessageId: SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD
- //
- // MessageText:
- //
- // The driver unloaded without cancelling pending operations.
- //
- SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD = ULONG($000000D4);
- {$EXTERNALSYM SYSTEM_SCAN_AT_RAISED_IRQL_CAUGHT_IMPROPER_DRIVER_UNLOAD}
- //
- // MessageId: DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL
- //
- // MessageText:
- //
- //
- // The driver is attempting to access memory after it has been freed.
- //
- DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL = ULONG($000000D5);
- {$EXTERNALSYM DRIVER_PAGE_FAULT_IN_FREED_SPECIAL_POOL}
- //
- // MessageId: DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION
- //
- // MessageText:
- //
- //
- // The driver is attempting to access memory beyond the end of the allocation.
- //
- DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION = ULONG($000000D6);
- {$EXTERNALSYM DRIVER_PAGE_FAULT_BEYOND_END_OF_ALLOCATION}
- //
- // MessageId: DRIVER_UNMAPPING_INVALID_VIEW
- //
- // MessageText:
- //
- //
- // The driver is attempting to unmap an invalid memory address.
- //
- DRIVER_UNMAPPING_INVALID_VIEW = ULONG($000000D7);
- {$EXTERNALSYM DRIVER_UNMAPPING_INVALID_VIEW}
- //
- // MessageId: DRIVER_USED_EXCESSIVE_PTES
- //
- // MessageText:
- //
- //
- // The driver has used an excessive number of system PTEs.
- //
- DRIVER_USED_EXCESSIVE_PTES = ULONG($000000D8);
- {$EXTERNALSYM DRIVER_USED_EXCESSIVE_PTES}
- //
- // MessageId: LOCKED_PAGES_TRACKER_CORRUPTION
- //
- // MessageText:
- //
- //
- // The driver is corrupting the locked pages tracking structures.
- //
- LOCKED_PAGES_TRACKER_CORRUPTION = ULONG($000000D9);
- {$EXTERNALSYM LOCKED_PAGES_TRACKER_CORRUPTION}
- //
- // MessageId: SYSTEM_PTE_MISUSE
- //
- // MessageText:
- //
- //
- // The driver is mismanaging system PTEs.
- //
- SYSTEM_PTE_MISUSE = ULONG($000000DA);
- {$EXTERNALSYM SYSTEM_PTE_MISUSE}
- //
- // MessageId: DRIVER_CORRUPTED_SYSPTES
- //
- // MessageText:
- //
- //
- // A driver has corrupted the memory management system PTEs.
- //
- DRIVER_CORRUPTED_SYSPTES = ULONG($000000DB);
- {$EXTERNALSYM DRIVER_CORRUPTED_SYSPTES}
- //
- // MessageId: DRIVER_INVALID_STACK_ACCESS
- //
- // MessageText:
- //
- //
- // A driver accessed a stack address that lies below the current stack pointer
- // of the stack's thread.
- //
- DRIVER_INVALID_STACK_ACCESS = ULONG($000000DC);
- {$EXTERNALSYM DRIVER_INVALID_STACK_ACCESS}
- //
- // MessageId: BUGCODE_PSS_MESSAGE_A5
- //
- // MessageText:
- //
- //
- // The BIOS in this system is not fully ACPI compliant. Please contact your
- // system vendor or visit http://www.hardware-update.com for an updated BIOS.
- // If you are unable to obtain an updated BIOS or the latest BIOS supplied by
- // your vendor is not ACPI compliant, you can turn off ACPI mode during text
- // mode setup. To do this, simply press the F7 key when you are prompted to
- // install storage drivers. The system will not notify you that the F7 key
- // was pressed - it will silently disable ACPI and allow you to continue
- // your installation.
- //
- BUGCODE_PSS_MESSAGE_A5 = ULONG($000000DD);
- {$EXTERNALSYM BUGCODE_PSS_MESSAGE_A5}
- //
- // MessageId: POOL_CORRUPTION_IN_FILE_AREA
- //
- // MessageText:
- //
- //
- // A driver corrupted pool memory used for holding pages destined for disk.
- //
- POOL_CORRUPTION_IN_FILE_AREA = ULONG($000000DE);
- {$EXTERNALSYM POOL_CORRUPTION_IN_FILE_AREA}
- //
- // MessageId: HARDWARE_PROFILE_UNDOCKED_STRING
- //
- // MessageText:
- //
- // Undocked Profile
- //
- HARDWARE_PROFILE_UNDOCKED_STRING = ULONG($40010001);
- {$EXTERNALSYM HARDWARE_PROFILE_UNDOCKED_STRING}
- //
- // MessageId: HARDWARE_PROFILE_DOCKED_STRING
- //
- // MessageText:
- //
- // Docked Profile
- //
- HARDWARE_PROFILE_DOCKED_STRING = ULONG($40010002);
- {$EXTERNALSYM HARDWARE_PROFILE_DOCKED_STRING}
- //
- // MessageId: HARDWARE_PROFILE_UNKNOWN_STRING
- //
- // MessageText:
- //
- // Profile
- //
- HARDWARE_PROFILE_UNKNOWN_STRING = ULONG($40010003);
- {$EXTERNALSYM HARDWARE_PROFILE_UNKNOWN_STRING}
- //
- // MessageId: IMPERSONATING_WORKER_THREAD
- //
- // MessageText:
- //
- //
- // A worker thread is impersonating another process. The work item forgot to
- // disable impersonation before it returned.
- //
- IMPERSONATING_WORKER_THREAD = ULONG($000000DF);
- {$EXTERNALSYM IMPERSONATING_WORKER_THREAD}
- //
- // MessageId: ACPI_BIOS_FATAL_ERROR
- //
- // MessageText:
- //
- //
- // Your computer (BIOS) has reported that a component in your system is faulty and
- // has prevented Windows from operating. You can determine which component is
- // faulty by running the diagnostic disk or tool that came with your computer.
- //
- // If you do not have this tool, you must contact your system vendor and report
- // this error message to them. They will be able to assist you in correcting this
- // hardware problem thereby allowing Windows to operate.
- //
- ACPI_BIOS_FATAL_ERROR = ULONG($000000E0);
- {$EXTERNALSYM ACPI_BIOS_FATAL_ERROR}
- //
- // MessageId: WORKER_THREAD_RETURNED_AT_BAD_IRQL
- //
- // MessageText:
- //
- // WORKER_THREAD_RETURNED_AT_BAD_IRQL
- //
- WORKER_THREAD_RETURNED_AT_BAD_IRQL = ULONG($000000E1);
- {$EXTERNALSYM WORKER_THREAD_RETURNED_AT_BAD_IRQL}
- //
- // MessageId: MANUALLY_INITIATED_CRASH
- //
- // MessageText:
- //
- //
- // The end-user manually generated the crashdump.
- //
- MANUALLY_INITIATED_CRASH = ULONG($000000E2);
- {$EXTERNALSYM MANUALLY_INITIATED_CRASH}
- //
- // MessageId: RESOURCE_NOT_OWNED
- //
- // MessageText:
- //
- //
- // A thread tried to release a resource it did not own.
- //
- RESOURCE_NOT_OWNED = ULONG($000000E3);
- {$EXTERNALSYM RESOURCE_NOT_OWNED}
- //
- // MessageId: WORKER_INVALID
- //
- // MessageText:
- //
- //
- // A executive worker item was found in memory which must not contain such
- // items. Usually this is memory being freed. This is usually caused by
- // a device driver that has not cleaned up properly before freeing memory.
- //
- WORKER_INVALID = ULONG($000000E4);
- {$EXTERNALSYM WORKER_INVALID}
- implementation
- end.