开通博客赚积分
发布资源赚积分
分类

源码开发语言/平台
当前位置：首页 > 源码/资料 > 嵌入式/单片机编程 > 嵌入式Linux > 查看源码
audio.c
资源名称：SBC-2410X_kernel.tar.gz　[点击查看]
上传用户：lgb322
上传日期：2013-02-24
资源大小：30529k
文件大小：104k
源码类别：

嵌入式Linux

开发平台：

Unix_Linux

audio.c：源码内容
  1. /* $Id: audio.c,v 1.62 2001/10/08 22:19:50 davem Exp $
  2.  * drivers/sbus/audio/audio.c
  3.  *
  4.  * Copyright 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu)
  5.  * Copyright 1997,1998,1999 Derrick J. Brashear (shadow@dementia.org)
  6.  * Copyright 1997 Brent Baccala (baccala@freesoft.org)
  7.  * 
  8.  * Mixer code adapted from code contributed by and
  9.  * Copyright 1998 Michael Mraka (michael@fi.muni.cz)
  10.  * and with fixes from Michael Shuey (shuey@ecn.purdue.edu)
  11.  * The mixer code cheats; Sparc hardware doesn't generally allow independent
  12.  * line control, and this fakes it badly.
  13.  *
  14.  * SNDCTL_DSP_SETFMT based on code contributed by
  15.  * Ion Badulescu (ionut@moisil.cs.columbia.edu)
  16.  *
  17.  * This is the audio midlayer that sits between the VFS character
  18.  * devices and the low-level audio hardware device drivers.
  19.  */
  21. #include <linux/config.h>
  22. #include <linux/module.h>
  23. #include <linux/errno.h>
  24. #include <linux/fs.h>
  25. #include <linux/kernel.h>
  26. #include <linux/sched.h>
  27. #include <linux/smp_lock.h>
  28. #include <linux/mm.h>
  29. #include <linux/tqueue.h>
  30. #include <linux/major.h>
  31. #include <linux/slab.h>
  32. #include <linux/interrupt.h>
  33. #include <linux/init.h>
  34. #include <linux/soundcard.h>
  35. #include <linux/devfs_fs_kernel.h>
  36. #include <linux/delay.h>
  37. #include <linux/poll.h>
  38. #include <asm/pgtable.h>
  39. #include <asm/uaccess.h>
  41. #include <asm/audioio.h>
  43. #undef __AUDIO_DEBUG
  44. #define __AUDIO_ERROR
  45. #undef __AUDIO_TRACE
  46. #undef __AUDIO_OSSDEBUG
  47. #ifdef __AUDIO_DEBUG
  48. #define dprintk(x) printk x
  49. #else
  50. #define dprintk(x)
  51. #endif
  52. #ifdef __AUDIO_OSSDEBUG
  53. #define oprintk(x) printk x
  54. #else
  55. #define oprintk(x)
  56. #endif
  57. #ifdef __AUDIO_ERROR
  58. #define eprintk(x) printk x
  59. #else
  60. #define eprintk(x)
  61. #endif
  62. #ifdef __AUDIO_TRACE
  63. #define tprintk(x) printk x
  64. #else
  65. #define tprintk(x)
  66. #endif
  68. static short lis_get_elist_ent( strevent_t *list, pid_t pid );
  69. static int lis_add_to_elist( strevent_t **list, pid_t pid, short events );
  70. static int lis_del_from_elist( strevent_t **list, pid_t pid, short events );
  71. static void lis_free_elist( strevent_t **list);
  72. static void kill_procs( struct strevent *elist, int sig, short e);
  74. static struct sparcaudio_driver *drivers[SPARCAUDIO_MAX_DEVICES];
  75. static devfs_handle_t devfs_handle;
  76.  
  78. void sparcaudio_output_done(struct sparcaudio_driver * drv, int status)
  79. {
  80.         /* If !status, just restart current output.
  81.          * If status & 1, a buffer is finished; make it available again.
  82.          * If status & 2, a buffer was claimed for DMA and is still in use.
  83.          *
  84.          * The playing_count for non-DMA hardware should never be non-zero.
  85.          * Value of status for non-DMA hardware should always be 1.
  86.          */
  87.         if (status & 1) {
  88.                 if (drv->playing_count) {
  89.                         drv->playing_count--;
  90.                 } else {
  91.                         drv->output_count--;
  92.                         drv->output_size -= drv->output_sizes[drv->output_front];
  93.                         if (drv->output_notify[drv->output_front] == 1) {
  94.                                 drv->output_eof++;
  95.                                 drv->output_notify[drv->output_front] = 0;
  96.                                 kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  97.                         }
  98.                         drv->output_front = (drv->output_front + 1) % 
  99.                                 drv->num_output_buffers;
  100.                 }
  101.         }
  102.     
  103.         if (status & 2) {
  104.                 drv->output_count--;
  105.                 drv->playing_count++;
  106.                 drv->output_size -= drv->output_sizes[drv->output_front];
  107.                 if (drv->output_notify[drv->output_front] == 1) {
  108.                         drv->output_eof++;
  109.                         drv->output_notify[drv->output_front] = 0;
  110.                         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  111.                 }
  112.                 drv->output_front = (drv->output_front + 1) % 
  113.                         drv->num_output_buffers;
  114.         }
  116.         /* If we've played everything go inactive. */
  117.         if ((drv->output_count < 1) && (drv->playing_count < 1)) 
  118.                 drv->output_active = 0;
  120.         /* If we got back a buffer, see if anyone wants to write to it */
  121.         if ((status & 1) || ((drv->output_count + drv->playing_count) 
  122.                              < drv->num_output_buffers)) {
  123.                 wake_up_interruptible(&drv->output_write_wait);
  124.         }
  126.         /* If the output queue is empty, shut down the driver. */
  127.         if ((drv->output_count < 1) && (drv->playing_count < 1)) {
  128.                 kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  130.                 /* Stop the lowlevel driver from outputing. */
  131.                 /* drv->ops->stop_output(drv); Should not be necessary  -- DJB 5/25/98 */
  132.                 drv->output_active = 0;
  133.   
  134.                 /* Wake up any waiting writers or syncers and return. */
  135.                 wake_up_interruptible(&drv->output_write_wait);
  136.                 wake_up_interruptible(&drv->output_drain_wait);
  137.                 return;
  138.         }
  140.         /* Start next block of output if we have it */
  141.         if (drv->output_count > 0) {
  142.                 drv->ops->start_output(drv, drv->output_buffers[drv->output_front],
  143.                                        drv->output_sizes[drv->output_front]);
  144.                 drv->output_active = 1;
  145.         } else {
  146.                 drv->output_active = 0;
  147.         }
  148. }
  150. void sparcaudio_input_done(struct sparcaudio_driver * drv, int status)
  151. {
  152.         /* Deal with the weird case here */
  153.         if (drv->duplex == 2) {
  154.                 if (drv->input_count < drv->num_input_buffers)
  155.                         drv->input_count++;
  156.                 drv->ops->start_input(drv, drv->input_buffers[drv->input_front],
  157.                                       drv->input_buffer_size);
  158.                 wake_up_interruptible(&drv->input_read_wait);
  159.                 return;
  160.         } 
  162.         /* If status % 2, they filled a buffer for us. 
  163.          * If status & 2, they took a buffer from us.
  164.          */
  165.         if ((status % 2) == 1) {
  166.                 drv->input_count++;
  167.                 drv->recording_count--;
  168.                 drv->input_size+=drv->input_buffer_size;
  169.         }
  171.         if (status > 1) {
  172.                 drv->recording_count++;
  173.                 drv->input_front = (drv->input_front + 1) % drv->num_input_buffers;
  174.         }
  176.         dprintk(("f%d r%d c%d u%dn",
  177.                  drv->input_front, drv->input_rear,
  178.                  drv->input_count, drv->recording_count));
  180.         /* If the input queue is full, shutdown the driver. */
  181.         if ((drv->input_count + drv->recording_count) == drv->num_input_buffers) {
  182.                 kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  184.                 /* Stop the lowlevel driver from inputing. */
  185.                 drv->ops->stop_input(drv);
  186.                 drv->input_active = 0;
  187.         } else {
  188.                 /* Otherwise, give the driver the next buffer. */
  189.                 drv->ops->start_input(drv, drv->input_buffers[drv->input_front],
  190.                                       drv->input_buffer_size);
  191.         }
  193.         /* Wake up any tasks that are waiting. */
  194.         wake_up_interruptible(&drv->input_read_wait);
  195. }
  197. /*
  198.  * VFS layer interface
  199.  */
  201. static unsigned int sparcaudio_poll(struct file *file, poll_table * wait)
  202. {
  203.         unsigned int mask = 0;
  204.         struct inode *inode = file->f_dentry->d_inode;
  205.         struct sparcaudio_driver *drv = drivers[(MINOR(inode->i_rdev) >>
  206.                                                  SPARCAUDIO_DEVICE_SHIFT)];
  208.         poll_wait(file, &drv->input_read_wait, wait);
  209.         poll_wait(file, &drv->output_write_wait, wait);
  210.         if (((!file->f_flags & O_NONBLOCK) && drv->input_count) ||
  211.             (drv->input_size > drv->buffer_size)) {
  212.                 mask |= POLLIN | POLLRDNORM;
  213.         }
  214.         if ((drv->output_count + drv->playing_count) < (drv->num_output_buffers)) {
  215.                 mask |= POLLOUT | POLLWRNORM;
  216.         }
  217.         return mask;
  218. }
  220. static ssize_t sparcaudio_read(struct file * file, char *buf, 
  221.                                size_t count, loff_t *ppos)
  222. {
  223.         struct inode *inode = file->f_dentry->d_inode;
  224.         struct sparcaudio_driver *drv = drivers[(MINOR(inode->i_rdev) >>
  225.                                                  SPARCAUDIO_DEVICE_SHIFT)];
  226.         int bytes_to_copy, bytes_read = 0, err;
  228.         if (! (file->f_mode & FMODE_READ))
  229.                 return -EINVAL;
  231.         if ((file->f_flags & O_NONBLOCK) && (drv->input_size < count))
  232.                 return -EAGAIN;
  233.     
  234.         while (count > 0) {
  235.                 if (drv->input_count == 0) {
  236.                         /* This *should* never happen. */
  237.                         if (file->f_flags & O_NONBLOCK) {
  238.                                 printk("Warning: audio input leak!n");
  239.                                 return -EAGAIN;
  240.                         }
  241.                         interruptible_sleep_on(&drv->input_read_wait);
  242.                         if (signal_pending(current))
  243.                                 return -EINTR;
  244.                 }
  245.   
  246.                 bytes_to_copy = drv->input_buffer_size - drv->input_offset;
  247.                 if (bytes_to_copy > count)
  248.                         bytes_to_copy = count;
  250.                 err = verify_area(VERIFY_WRITE, buf, bytes_to_copy);
  251.                 if (err)
  252.                         return err;
  254.                 copy_to_user(buf, drv->input_buffers[drv->input_rear]+drv->input_offset, 
  255.                              bytes_to_copy);
  257.                 drv->input_offset += bytes_to_copy;
  258.                 drv->input_size -= bytes_to_copy;
  259.                 buf += bytes_to_copy;
  260.                 count -= bytes_to_copy;
  261.                 bytes_read += bytes_to_copy;
  263.                 if (drv->input_offset >= drv->input_buffer_size) {
  264.                         drv->input_rear = (drv->input_rear + 1) % 
  265.                                 drv->num_input_buffers;
  266.                         drv->input_count--;
  267.                         drv->input_offset = 0;
  268.                 }
  270.                 /* If we're in "loop audio" mode, try waking up the other side
  271.                  * in case they're waiting for us to eat a block. 
  272.                  */
  273.                 if (drv->duplex == 2)
  274.                         wake_up_interruptible(&drv->output_write_wait);
  275.         }
  277.         return bytes_read;
  278. }
  280. static void sparcaudio_sync_output(struct sparcaudio_driver * drv)
  281. {
  282.         unsigned long flags;
  284.         /* If the low-level driver is not active, activate it. */
  285.         save_and_cli(flags);
  286.         if ((!drv->output_active) && (drv->output_count > 0)) {
  287.                 drv->ops->start_output(drv, 
  288.                                        drv->output_buffers[drv->output_front],
  289.                                        drv->output_sizes[drv->output_front]);
  290.                 drv->output_active = 1;
  291.         }
  292.         restore_flags(flags);
  293. }
  295. static ssize_t sparcaudio_write(struct file * file, const char *buf,
  296.                                 size_t count, loff_t *ppos)
  297. {
  298.         struct inode *inode = file->f_dentry->d_inode;
  299.         struct sparcaudio_driver *drv = drivers[(MINOR(inode->i_rdev) >>
  300.                                                  SPARCAUDIO_DEVICE_SHIFT)];
  301.         int bytes_written = 0, bytes_to_copy, err;
  302.   
  303.         if (! (file->f_mode & FMODE_WRITE))
  304.                 return -EINVAL;
  306.         /* A signal they want notification when this is processed. Too bad
  307.          * sys_write doesn't tell us unless you patch it, in 2.0 kernels.
  308.          */
  309.         if (count == 0) {
  310. #ifndef notdef
  311.                 drv->output_eof++;
  312.                 kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  313. #else
  314.                 /* Nice code, but the world isn't ready yet... */
  315.                 drv->output_notify[drv->output_rear] = 1;
  316. #endif
  317.         }
  319.         /* Loop until all output is written to device. */
  320.         while (count > 0) {
  321.                 /* Check to make sure that an output buffer is available. */
  322.                 if (drv->num_output_buffers == (drv->output_count+drv->playing_count)) {
  323.                         /* We need buffers, so... */
  324.                         sparcaudio_sync_output(drv);
  325.                         if (file->f_flags & O_NONBLOCK)
  326.                                 return -EAGAIN;
  328.                         interruptible_sleep_on(&drv->output_write_wait);
  329.                         if (signal_pending(current))
  330.                                 return bytes_written > 0 ? bytes_written : -EINTR;
  331.                 }
  333.                 /* No buffers were freed. Go back to sleep */
  334.                 if (drv->num_output_buffers == (drv->output_count+drv->playing_count)) 
  335.                         continue;
  337.                 /* Deal with the weird case of a reader in the write area by trying to
  338.                  * let them keep ahead of us... Go to sleep until they start servicing.
  339.                  */
  340.                 if ((drv->duplex == 2) && (drv->flags & SDF_OPEN_READ) &&
  341.                     (drv->output_rear == drv->input_rear) && (drv->input_count > 0)) {
  342.                         if (file->f_flags & O_NONBLOCK)
  343.                                 return -EAGAIN;
  345.                         interruptible_sleep_on(&drv->output_write_wait);
  346.                         if (signal_pending(current))
  347.                                 return bytes_written > 0 ? bytes_written : -EINTR;
  348.                 }
  350.                 /* Determine how much we can copy in this iteration. */
  351.                 bytes_to_copy = count;
  352.                 if (bytes_to_copy > drv->output_buffer_size - drv->output_offset)
  353.                         bytes_to_copy = drv->output_buffer_size - drv->output_offset;
  354.     
  355.                 err = verify_area(VERIFY_READ, buf, bytes_to_copy);
  356.                 if (err)
  357.                         return err;
  359.                 copy_from_user(drv->output_buffers[drv->output_rear]+drv->output_offset,
  360.                                buf, bytes_to_copy);
  361.     
  362.                 /* Update the queue pointers. */
  363.                 buf += bytes_to_copy;
  364.                 count -= bytes_to_copy;
  365.                 bytes_written += bytes_to_copy;
  367.                 /* A block can get orphaned in a flush and not cleaned up. */
  368.                 if (drv->output_offset)
  369.                         drv->output_sizes[drv->output_rear] += bytes_to_copy;
  370.                 else
  371.                         drv->output_sizes[drv->output_rear] = bytes_to_copy;
  373.                 drv->output_notify[drv->output_rear] = 0;
  375.                 if (drv->output_sizes[drv->output_rear] == drv->output_buffer_size) {
  376.                         drv->output_rear = (drv->output_rear + 1) 
  377.                                 % drv->num_output_buffers;
  378.                         drv->output_count++;
  379.                         drv->output_offset = 0;
  380.                 } else {
  381.                         drv->output_offset += bytes_to_copy;
  382.                 }
  384.                 drv->output_size += bytes_to_copy;
  385.         }
  387.         sparcaudio_sync_output(drv);
  388.   
  389.         /* Return the number of bytes written to the caller. */
  390.         return bytes_written;
  391. }
  393. /* Add these in as new devices are supported. Belongs in audioio.h, actually */
  394. #define MONO_DEVICES (SOUND_MASK_SPEAKER | SOUND_MASK_MIC)
  396. static int sparcaudio_mixer_ioctl(struct inode * inode, struct file * file,
  397.                                   unsigned int cmd, unsigned int *arg)
  398. {
  399.         struct sparcaudio_driver *drv = drivers[(MINOR(inode->i_rdev) >>
  400.                                                  SPARCAUDIO_DEVICE_SHIFT)];
  401.         unsigned long i = 0, j = 0, l = 0, m = 0;
  402.         unsigned int k = 0;
  404.         if (_SIOC_DIR(cmd) & _SIOC_WRITE)
  405.                 drv->mixer_modify_counter++;
  407.         if(cmd == SOUND_MIXER_INFO) {
  408.                 audio_device_t tmp;
  409.                 mixer_info info;
  410.                 int retval = -EINVAL;
  412.                 if(drv->ops->sunaudio_getdev) {
  413.                         drv->ops->sunaudio_getdev(drv, &tmp);
  414.                         memset(&info, 0, sizeof(info));
  415.                         strncpy(info.id, tmp.name, sizeof(info.id));
  416.                         strncpy(info.name, "Sparc Audio", sizeof(info.name));
  417.                         info.modify_counter = drv->mixer_modify_counter;
  419.                         if(copy_to_user((char *)arg, &info, sizeof(info)))
  420.                                 retval = -EFAULT;
  421.                         else
  422.                                 retval = 0;
  423.                 }
  424.                 return retval;
  425.   }
  427.         switch (cmd) {
  428.         case SOUND_MIXER_WRITE_RECLEV:
  429.                 if (get_user(k, (int *)arg))
  430.                         return -EFAULT;
  431.         iretry:
  432.                 oprintk(("setting input volume (0x%x)", k));
  433.                 if (drv->ops->get_input_channels)
  434.                         j = drv->ops->get_input_channels(drv);
  435.                 if (drv->ops->get_input_volume)
  436.                         l = drv->ops->get_input_volume(drv);
  437.                 if (drv->ops->get_input_balance)
  438.                         m = drv->ops->get_input_balance(drv);
  439.                 i = OSS_TO_GAIN(k);
  440.                 j = OSS_TO_BAL(k);
  441.                 oprintk((" for stereo to do %d (bal %d):", i, j));
  442.                 if (drv->ops->set_input_volume)
  443.                         drv->ops->set_input_volume(drv, i);
  444.                 if (drv->ops->set_input_balance)
  445.                         drv->ops->set_input_balance(drv, j);
  446.         case SOUND_MIXER_READ_RECLEV:
  447.                 if (drv->ops->get_input_volume)
  448.                         i = drv->ops->get_input_volume(drv);
  449.                 if (drv->ops->get_input_balance)
  450.                         j = drv->ops->get_input_balance(drv);
  451.                 oprintk((" got (0x%x)n", BAL_TO_OSS(i,j)));
  452.                 i = BAL_TO_OSS(i,j);
  453.                 /* Try to be reasonable about volume changes */
  454.                 if ((cmd == SOUND_MIXER_WRITE_RECLEV) && (i != k) && 
  455.                     (i == BAL_TO_OSS(l,m))) {
  456.                         k += (OSS_LEFT(k) > OSS_LEFT(i)) ? 256 : -256;
  457.                         k += (OSS_RIGHT(k) > OSS_RIGHT(i)) ? 1 : -1;
  458.                         oprintk((" try 0x%xn", k));
  459.                         goto iretry;
  460.                 }
  461.                 return put_user(i, (int *)arg);
  462.         case SOUND_MIXER_WRITE_VOLUME:
  463.                 if (get_user(k, (int *)arg))
  464.                         return -EFAULT;
  465.                 if (drv->ops->get_output_muted && drv->ops->set_output_muted) {
  466.                         i = drv->ops->get_output_muted(drv);
  467.                         if ((k == 0) || ((i == 0) && (OSS_LEFT(k) < 100)))
  468.                                 drv->ops->set_output_muted(drv, 1);
  469.                         else
  470.                                 drv->ops->set_output_muted(drv, 0);
  471.                 }
  472.         case SOUND_MIXER_READ_VOLUME:
  473.                 if (drv->ops->get_output_muted) 
  474.                         i = drv->ops->get_output_muted(drv);
  475.                 k = 0x6464 * (1 - i);
  476.                 return put_user(k, (int *)arg);
  477.         case SOUND_MIXER_WRITE_PCM:
  478.                 if (get_user(k, (int *)arg))
  479.                         return -EFAULT;
  480.         oretry:
  481.                 oprintk(("setting output volume (0x%x)n", k));
  482.                 if (drv->ops->get_output_channels)
  483.                         j = drv->ops->get_output_channels(drv);
  484.                 if (drv->ops->get_output_volume)
  485.                         l = drv->ops->get_output_volume(drv);
  486.                 if (drv->ops->get_output_balance)
  487.                         m = drv->ops->get_output_balance(drv);
  488.                 oprintk((" started as (0x%x)n", BAL_TO_OSS(l,m)));
  489.                 i = OSS_TO_GAIN(k);
  490.                 j = OSS_TO_BAL(k);
  491.                 oprintk((" for stereo to %d (bal %d)n", i, j));
  492.                 if (drv->ops->set_output_volume)
  493.                         drv->ops->set_output_volume(drv, i);
  494.                 if (drv->ops->set_output_balance)
  495.                         drv->ops->set_output_balance(drv, j);
  496.         case SOUND_MIXER_READ_PCM:
  497.                 if (drv->ops->get_output_volume)
  498.                         i = drv->ops->get_output_volume(drv);
  499.                 if (drv->ops->get_output_balance)
  500.                         j = drv->ops->get_output_balance(drv);
  501.                 oprintk((" got 0x%xn", BAL_TO_OSS(i,j)));
  502.                 i = BAL_TO_OSS(i,j);
  504.                 /* Try to be reasonable about volume changes */
  505.                 if ((cmd == SOUND_MIXER_WRITE_PCM) && (i != k) && 
  506.                     (i == BAL_TO_OSS(l,m))) {
  507.                         k += (OSS_LEFT(k) > OSS_LEFT(i)) ? 256 : -256;
  508.                         k += (OSS_RIGHT(k) > OSS_RIGHT(i)) ? 1 : -1;
  509.                         oprintk((" try 0x%xn", k));
  510.                         goto oretry;
  511.                 }
  512.                 return put_user(i, (int *)arg);
  513.         case SOUND_MIXER_READ_SPEAKER:
  514.                 k = OSS_PORT_AUDIO(drv, AUDIO_SPEAKER);
  515.                 return put_user(k, (int *)arg);
  516.         case SOUND_MIXER_READ_MIC:
  517.                 k = OSS_IPORT_AUDIO(drv, AUDIO_MICROPHONE);
  518.                 return put_user(k, (int *)arg);
  519.         case SOUND_MIXER_READ_CD:
  520.                 k = OSS_IPORT_AUDIO(drv, AUDIO_CD);
  521.                 return put_user(k, (int *)arg);
  522.         case SOUND_MIXER_READ_LINE:
  523.                 k = OSS_IPORT_AUDIO(drv, AUDIO_LINE_IN);
  524.                 return put_user(k, (int *)arg);
  525.         case SOUND_MIXER_READ_LINE1:
  526.                 k = OSS_PORT_AUDIO(drv, AUDIO_HEADPHONE);
  527.                 return put_user(k, (int *)arg);
  528.         case SOUND_MIXER_READ_LINE2:
  529.                 k = OSS_PORT_AUDIO(drv, AUDIO_LINE_OUT);
  530.                 return put_user(k, (int *)arg);
  532.         case SOUND_MIXER_WRITE_MIC:
  533.         case SOUND_MIXER_WRITE_CD:
  534.         case SOUND_MIXER_WRITE_LINE:
  535.         case SOUND_MIXER_WRITE_LINE1:
  536.         case SOUND_MIXER_WRITE_LINE2:
  537.         case SOUND_MIXER_WRITE_SPEAKER:
  538.                 if (get_user(k, (int *)arg))
  539.                         return -EFAULT;
  540.                 OSS_TWIDDLE_IPORT(drv, cmd, SOUND_MIXER_WRITE_LINE, AUDIO_LINE_IN, k);
  541.                 OSS_TWIDDLE_IPORT(drv, cmd, SOUND_MIXER_WRITE_MIC, AUDIO_MICROPHONE, k);
  542.                 OSS_TWIDDLE_IPORT(drv, cmd, SOUND_MIXER_WRITE_CD, AUDIO_CD, k);
  544.                 OSS_TWIDDLE_PORT(drv, cmd, SOUND_MIXER_WRITE_SPEAKER, AUDIO_SPEAKER, k);
  545.                 OSS_TWIDDLE_PORT(drv, cmd, SOUND_MIXER_WRITE_LINE1, AUDIO_HEADPHONE, k);
  546.                 OSS_TWIDDLE_PORT(drv, cmd, SOUND_MIXER_WRITE_LINE2, AUDIO_LINE_OUT, k);
  547.                 return put_user(k, (int *)arg);
  548.         case SOUND_MIXER_READ_RECSRC: 
  549.                 if (drv->ops->get_input_port)
  550.                         i = drv->ops->get_input_port(drv);
  552.                 /* only one should ever be selected */
  553.                 if (i & AUDIO_CD) j = SOUND_MASK_CD;
  554.                 if (i & AUDIO_LINE_IN) j = SOUND_MASK_LINE;
  555.                 if (i & AUDIO_MICROPHONE) j = SOUND_MASK_MIC;
  556.     
  557.                 return put_user(j, (int *)arg);
  558.   case SOUND_MIXER_WRITE_RECSRC: 
  559.           if (!drv->ops->set_input_port)
  560.                   return -EINVAL;
  561.           if (get_user(k, (int *)arg))
  562.                   return -EFAULT;
  564.           /* only one should ever be selected */
  565.           if (k & SOUND_MASK_CD) j = AUDIO_CD;
  566.           if (k & SOUND_MASK_LINE) j = AUDIO_LINE_IN;
  567.           if (k & SOUND_MASK_MIC) j = AUDIO_MICROPHONE;
  568.           oprintk(("setting inport to %dn", j));
  569.           i = drv->ops->set_input_port(drv, j);
  570.     
  571.           return put_user(i, (int *)arg);
  572.         case SOUND_MIXER_READ_RECMASK: 
  573.                 if (drv->ops->get_input_ports)
  574.                         i = drv->ops->get_input_ports(drv);
  575.                 /* what do we support? */
  576.                 if (i & AUDIO_MICROPHONE) j |= SOUND_MASK_MIC;
  577.                 if (i & AUDIO_LINE_IN) j |= SOUND_MASK_LINE;
  578.                 if (i & AUDIO_CD) j |= SOUND_MASK_CD;
  579.     
  580.                 return put_user(j, (int *)arg);
  581.         case SOUND_MIXER_READ_CAPS: /* mixer capabilities */
  582.                 i = SOUND_CAP_EXCL_INPUT;
  583.                 return put_user(i, (int *)arg);
  585.         case SOUND_MIXER_READ_DEVMASK: /* all supported devices */
  586.                 if (drv->ops->get_input_ports)
  587.                         i = drv->ops->get_input_ports(drv);
  588.                 /* what do we support? */
  589.                 if (i & AUDIO_MICROPHONE) j |= SOUND_MASK_MIC;
  590.                 if (i & AUDIO_LINE_IN) j |= SOUND_MASK_LINE;
  591.                 if (i & AUDIO_CD) j |= SOUND_MASK_CD;
  592.     
  593.                 if (drv->ops->get_output_ports)
  594.                         i = drv->ops->get_output_ports(drv);
  595.                 if (i & AUDIO_SPEAKER) j |= SOUND_MASK_SPEAKER;
  596.                 if (i & AUDIO_HEADPHONE) j |= SOUND_MASK_LINE1;
  597.                 if (i & AUDIO_LINE_OUT) j |= SOUND_MASK_LINE2;
  599.                 j |= SOUND_MASK_VOLUME;
  601.         case SOUND_MIXER_READ_STEREODEVS: /* what supports stereo */
  602.                 j |= SOUND_MASK_PCM|SOUND_MASK_RECLEV;
  604.                 if (cmd == SOUND_MIXER_READ_STEREODEVS)
  605.                         j &= ~(MONO_DEVICES);
  606.                 return put_user(j, (int *)arg);
  607.         default:
  608.                 return -EINVAL;
  609.         };
  610. }
  612. /* AUDIO_SETINFO uses these to set values if possible. */
  613. static __inline__ int 
  614. __sparcaudio_if_set_do(struct sparcaudio_driver *drv, 
  615.        int (*set_function)(struct sparcaudio_driver *, int), 
  616.        int (*get_function)(struct sparcaudio_driver *), 
  617.        unsigned int value)
  618. {
  619.         if (set_function && Modify(value))
  620.                 return (int) set_function(drv, value);
  621.         else if (get_function)
  622.                 return (int) get_function(drv);
  623.         else 
  624.                 return 0;
  625. }
  627. static __inline__ int 
  628. __sparcaudio_if_setc_do(struct sparcaudio_driver *drv, 
  629. int (*set_function)(struct sparcaudio_driver *, int), 
  630. int (*get_function)(struct sparcaudio_driver *), 
  631. unsigned char value)
  632. {
  633.         if (set_function && Modifyc(value))
  634.                 return (char) set_function(drv, (int)value);
  635.         else if (get_function)
  636.                 return (char) get_function(drv);
  637.         else 
  638.                 return 0;
  639. }
  641. /* I_FLUSH, I_{G,S}ETSIG, I_NREAD provided for SunOS compatibility
  642.  *
  643.  * I must admit I'm quite ashamed of the state of the ioctl handling,
  644.  * but I do have several optimizations which I'm planning. -- DJB
  645.  */
  646. static int sparcaudio_ioctl(struct inode * inode, struct file * file,
  647.     unsigned int cmd, unsigned long arg)
  648. {
  649. int retval = 0, i, j, k;
  650. int minor = MINOR(inode->i_rdev);
  651. struct audio_info ainfo;
  652. audio_buf_info binfo;
  653. count_info cinfo;
  654. struct sparcaudio_driver *drv = 
  655.                 drivers[(minor >> SPARCAUDIO_DEVICE_SHIFT)];
  657. switch (minor & 0xf) {
  658. case SPARCAUDIO_MIXER_MINOR:
  659.                 return sparcaudio_mixer_ioctl(inode, file, cmd, (unsigned int *)arg);
  660. case SPARCAUDIO_DSP16_MINOR:
  661.         case SPARCAUDIO_DSP_MINOR:
  662. case SPARCAUDIO_AUDIO_MINOR:
  663. case SPARCAUDIO_AUDIOCTL_MINOR:
  664.                 /* According to the OSS prog int, you can mixer ioctl /dev/dsp */
  665.                 if (_IOC_TYPE(cmd) == 'M')
  666.                         return sparcaudio_mixer_ioctl(inode, 
  667.                                                       file, cmd, (unsigned int *)arg);
  668.                 switch (cmd) {
  669.                 case I_GETSIG:
  670.                 case I_GETSIG_SOLARIS:
  671.                         j = (int) lis_get_elist_ent(drv->sd_siglist,current->pid);
  672.                         put_user(j, (int *)arg);
  673.                         retval = drv->input_count;
  674.                         break;
  676.                 case I_SETSIG:
  677.                 case I_SETSIG_SOLARIS:
  678.                         if ((minor & 0xf) == SPARCAUDIO_AUDIOCTL_MINOR) {
  679.                                 if (!arg) {
  680.                                         if (lis_del_from_elist(&(drv->sd_siglist),
  681.                                                                current->pid,S_ALL)) {
  682.                                                 retval = -EINVAL;
  683.                                         } else if (!drv->sd_siglist) {
  684.                                                 drv->sd_sigflags=0;
  685.                                         }
  686.                                 } else if (lis_add_to_elist(&(drv->sd_siglist),
  687.                                                             current->pid,
  688.                                                             (short)arg)) {
  689.                                         retval = -EAGAIN;
  690.                                 } else {
  691.                                         ((drv->sd_sigflags) |= (arg));
  692.                                 }
  693.                         }
  694.                         break;
  695.                 case I_NREAD:
  696.                 case I_NREAD_SOLARIS:
  697.                         /* According to the Solaris man page, this copies out
  698.                          * the size of the first streams buffer and returns 
  699.                          * the number of streams messages on the read queue as
  700.                          * as its retval. (streamio(7I)) This should work.
  701.                          */
  702.                         j = (drv->input_count > 0) ? drv->input_buffer_size : 0;
  703.                         put_user(j, (int *)arg);
  704.                         retval = drv->input_count;
  705.                         break;
  707.                         /* A poor substitute until we do true resizable buffers. */
  708.                 case SNDCTL_DSP_GETISPACE:
  709.                         binfo.fragstotal = drv->num_input_buffers;
  710.                         binfo.fragments = drv->num_input_buffers - 
  711.                                 (drv->input_count + drv->recording_count);
  712.                         binfo.fragsize = drv->input_buffer_size;
  713.                         binfo.bytes = binfo.fragments*binfo.fragsize;
  714.     
  715.                         retval = verify_area(VERIFY_WRITE, (int *)arg, sizeof(binfo));
  716.                         if (retval)
  717.                                 break;
  718.                         copy_to_user(&((char *)arg)[0], (char *)&binfo, sizeof(binfo));
  719.                         break;
  720.                 case SNDCTL_DSP_GETOSPACE:
  721.                         binfo.fragstotal = drv->num_output_buffers;
  722.                         binfo.fragments = drv->num_output_buffers - 
  723.                                 (drv->output_count + drv->playing_count + 
  724.                                  (drv->output_offset ? 1 : 0));
  725.                         binfo.fragsize = drv->output_buffer_size;
  726.                         binfo.bytes = binfo.fragments*binfo.fragsize + 
  727.                                 (drv->output_buffer_size - drv->output_offset);
  728.     
  729.                         retval = verify_area(VERIFY_WRITE, (int *)arg, sizeof(binfo));
  730.                         if (retval)
  731.                                 break;
  732.                         copy_to_user(&((char *)arg)[0], (char *)&binfo, sizeof(binfo));
  733.                         break;
  734.                 case SNDCTL_DSP_GETIPTR:
  735.                 case SNDCTL_DSP_GETOPTR:
  736.                         /* int bytes (number of bytes read/written since last)
  737.                          * int blocks (number of frags read/wrote since last call)
  738.                          * int ptr (current position of dma in buffer)
  739.                          */
  740.                         retval = 0;
  741.                         cinfo.bytes = 0;
  742.                         cinfo.ptr = 0;
  743.                         cinfo.blocks = 0;
  744.                         cinfo.bytes += cinfo.ptr;
  745.     
  746.                         retval = verify_area(VERIFY_WRITE, (int *)arg, sizeof(cinfo));
  747.                         if (retval)
  748.                                 break;
  749.                         copy_to_user(&((char *)arg)[0], (char *)&cinfo, sizeof(cinfo));
  750.                         break;
  751.                 case SNDCTL_DSP_SETFRAGMENT:
  752.                         /* XXX Small hack to get ESD/Enlightenment to work.  --DaveM */
  753.                         retval = 0;
  754.                         break;
  756.                 case SNDCTL_DSP_SUBDIVIDE:
  757.                         /* I don't understand what I need to do yet. */
  758.                         retval = -EINVAL;
  759.                         break;
  760.                 case SNDCTL_DSP_SETTRIGGER:
  761.                         /* This may not be 100% correct */
  762.                         if ((arg & PCM_ENABLE_INPUT) && drv->ops->get_input_pause &&
  763.                             drv->ops->set_input_pause) {
  764.                                 if (drv->ops->get_input_pause(drv))
  765.                                         drv->ops->set_input_pause(drv, 0);
  766.                         } else {
  767.                                 if (!drv->ops->get_input_pause(drv))
  768.                                         drv->ops->set_input_pause(drv, 1);
  769.                         }
  770.                         if ((arg & PCM_ENABLE_OUTPUT) && drv->ops->get_output_pause &&
  771.                             drv->ops->set_output_pause) {
  772.                                 if (drv->ops->get_output_pause(drv))
  773.                                         drv->ops->set_output_pause(drv, 0);
  774.                         } else {
  775.                                 if (!drv->ops->get_output_pause(drv))
  776.                                         drv->ops->set_output_pause(drv, 1);
  777.                         }
  778.                         break;
  779.                 case SNDCTL_DSP_GETTRIGGER:
  780.                         j = 0;
  781.                         if (drv->ops->get_input_pause) {
  782.                                 if (drv->ops->get_input_pause(drv))
  783.                                         j = PCM_ENABLE_INPUT;
  784.                         }
  785.                         if (drv->ops->get_output_pause) {
  786.                                 if (drv->ops->get_output_pause(drv))
  787.                                         j |= PCM_ENABLE_OUTPUT;
  788.                         }
  789.                         put_user(j, (int *)arg);
  790.                         break;
  791.                 case SNDCTL_DSP_GETBLKSIZE:
  792.                         j = drv->input_buffer_size;
  793.                         put_user(j, (int *)arg);
  794.                         break;
  795.                 case SNDCTL_DSP_SPEED:
  796.                         if ((!drv->ops->set_output_rate) && 
  797.                             (!drv->ops->set_input_rate)) {
  798.                                 retval = -EINVAL;
  799.                                 break;
  800.                         }
  801.                         get_user(i, (int *)arg)
  802.                         tprintk(("setting speed to %dn", i));
  803.                         drv->ops->set_input_rate(drv, i);
  804.                         drv->ops->set_output_rate(drv, i);
  805.                         j = drv->ops->get_output_rate(drv);
  806.                         put_user(j, (int *)arg);
  807.                         break;
  808.                 case SNDCTL_DSP_GETCAPS:
  809.                         /* All Sparc audio hardware is full duplex.
  810.                          * 4231 supports DMA pointer reading, 7930 is byte at a time.
  811.                          * Pause functionality emulates trigger
  812.                          */
  813.                         j = DSP_CAP_DUPLEX | DSP_CAP_TRIGGER | DSP_CAP_REALTIME;
  814.                         put_user(j, (int *)arg);
  815.                         break;
  816.                 case SNDCTL_DSP_GETFMTS:
  817.                         if (drv->ops->get_formats) {
  818.                                 j = drv->ops->get_formats(drv);
  819.                                 put_user(j, (int *)arg);
  820.                         } else {
  821.                                 retval = -EINVAL;
  822.                         }
  823.                         break;
  824.                 case SNDCTL_DSP_SETFMT:
  825.                         /* need to decode into encoding, precision */
  826.                         get_user(i, (int *)arg);
  827.     
  828.                         /* handle special case here */
  829.                         if (i == AFMT_QUERY) {
  830.                                 j = drv->ops->get_output_encoding(drv);
  831.                                 k = drv->ops->get_output_precision(drv);
  832.                                 if (j == AUDIO_ENCODING_DVI) {
  833.                                         i = AFMT_IMA_ADPCM;
  834.                                 } else if (k == 8) {
  835.                                         switch (j) {
  836.                                         case AUDIO_ENCODING_ULAW:
  837.                                                 i = AFMT_MU_LAW;
  838.                                                 break;
  839.                                         case AUDIO_ENCODING_ALAW:
  840.                                                 i = AFMT_A_LAW;
  841.                                                 break;
  842.                                         case AUDIO_ENCODING_LINEAR8:
  843.                                                 i = AFMT_U8;
  844.                                                 break;
  845.                                         };
  846.                                 } else if (k == 16) {
  847.                                         switch (j) {
  848.                                         case AUDIO_ENCODING_LINEAR:
  849.                                                 i = AFMT_S16_BE;
  850.                                                 break;
  851.                                         case AUDIO_ENCODING_LINEARLE:
  852.                                                 i = AFMT_S16_LE;
  853.                                                 break;
  854.                                         };
  855.                                 } 
  856.                                 put_user(i, (int *)arg);
  857.                                 break;
  858.                         }
  860.                         /* Without these there's no point in trying */
  861.                         if (!drv->ops->set_input_precision ||
  862.                             !drv->ops->set_input_encoding ||
  863.                             !drv->ops->set_output_precision ||
  864.                             !drv->ops->set_output_encoding) {
  865.                                 eprintk(("missing set routines: failedn"));
  866.                                 retval = -EINVAL;
  867.                                 break;
  868.                         }
  870.                         if (drv->ops->get_formats) {
  871.                                 if (!(drv->ops->get_formats(drv) & i)) {
  872.                                         dprintk(("format not supportedn"));
  873.                                         return -EINVAL;
  874.                                 }
  875.                         }
  876.                         switch (i) {
  877.                         case AFMT_S16_LE:
  878.                                 ainfo.record.precision = ainfo.play.precision = 16;
  879.                                 ainfo.record.encoding = ainfo.play.encoding =
  880.                                         AUDIO_ENCODING_LINEARLE;
  881.                                 break;
  882.                         case AFMT_S16_BE:
  883.                                 ainfo.record.precision = ainfo.play.precision = 16;
  884.                                 ainfo.record.encoding = ainfo.play.encoding =
  885.                                         AUDIO_ENCODING_LINEAR;
  886.                                 break;
  887.                         case AFMT_MU_LAW:
  888.                                 ainfo.record.precision = ainfo.play.precision = 8;
  889.                                 ainfo.record.encoding = ainfo.play.encoding =
  890.                                         AUDIO_ENCODING_ULAW;
  891.                                 break;
  892.                         case AFMT_A_LAW:
  893.                                 ainfo.record.precision = ainfo.play.precision = 8;
  894.                                 ainfo.record.encoding = ainfo.play.encoding =
  895.                                         AUDIO_ENCODING_ALAW;
  896.                                 break;
  897.                         case AFMT_U8:
  898.                                 ainfo.record.precision = ainfo.play.precision = 8;
  899.                                 ainfo.record.encoding = ainfo.play.encoding =
  900.                                         AUDIO_ENCODING_LINEAR8;
  901.                                 break;
  902.                         };
  903.                         tprintk(("setting fmt to enc %d pr %dn",
  904.                                  ainfo.play.encoding,
  905.                                  ainfo.play.precision));
  906.                         if ((drv->ops->set_input_precision(drv,
  907.                                                            ainfo.record.precision) 
  908.                              < 0) ||
  909.                             (drv->ops->set_output_precision(drv,
  910.                                                             ainfo.play.precision)  
  911.                              < 0) ||
  912.                             (drv->ops->set_input_encoding(drv,
  913.                                                           ainfo.record.encoding)
  914.                              < 0) ||
  915.                             (drv->ops->set_output_encoding(drv,
  916.                                                            ainfo.play.encoding)
  917.                              < 0)) {
  918.                                 dprintk(("setting format: failedn"));
  919.                                 return -EINVAL;
  920.                         }
  921.                         put_user(i, (int *)arg);
  922.                         break;
  923.                 case SNDCTL_DSP_CHANNELS:
  924.                         if ((!drv->ops->set_output_channels) && 
  925.                             (!drv->ops->set_input_channels)) {
  926.                                 retval = -EINVAL;
  927.                                 break;
  928.                         }
  929.                         get_user(i, (int *)arg);
  930.                         drv->ops->set_input_channels(drv, i);
  931.                         drv->ops->set_output_channels(drv, i);
  932.                         i = drv->ops->get_output_channels(drv);
  933.                         put_user(i, (int *)arg);
  934.                         break;
  935.                 case SNDCTL_DSP_STEREO:
  936.                         if ((!drv->ops->set_output_channels) && 
  937.                             (!drv->ops->set_input_channels)) {
  938.                                 retval = -EINVAL;
  939.                                 break;
  940.                         }
  941.                         get_user(i, (int *)arg);
  942.                         drv->ops->set_input_channels(drv, (i + 1));
  943.                         drv->ops->set_output_channels(drv, (i + 1));
  944.                         i = ((drv->ops->get_output_channels(drv)) - 1);
  945.                         put_user(i, (int *)arg);
  946.                         break;
  947.                 case SNDCTL_DSP_POST:
  948.                 case SNDCTL_DSP_SYNC:
  949.                 case AUDIO_DRAIN:
  950.                         /* Deal with weirdness so we can fill buffers */
  951.                         if (drv->output_offset) {
  952.                                 drv->output_offset = 0;
  953.                                 drv->output_rear = (drv->output_rear + 1)
  954.                                         % drv->num_output_buffers;
  955.                                 drv->output_count++;
  956.                         }
  957.                         if (drv->output_count > 0) {
  958.                                 sparcaudio_sync_output(drv);
  959.                                 /* Only pause for DRAIN/SYNC, not POST */
  960.                                 if (cmd != SNDCTL_DSP_POST) {
  961.                                         interruptible_sleep_on(&drv->output_drain_wait);
  962.                                         retval = (signal_pending(current)) ? -EINTR : 0;
  963.                                 }
  964.                         }
  965.                         break;
  966.                 case I_FLUSH:
  967.                 case I_FLUSH_SOLARIS:
  968.                         if (((unsigned int)arg == FLUSHW) || 
  969.                             ((unsigned int)arg == FLUSHRW)) {
  970.                                 if (file->f_mode & FMODE_WRITE) {
  971.                                         sparcaudio_sync_output(drv);
  972.                                         if (drv->output_active) {
  973.                                                 wake_up_interruptible(&drv->output_write_wait);
  974.                                                 drv->ops->stop_output(drv);
  975.                                         }
  976.                                         drv->output_offset = 0;
  977.                                         drv->output_active = 0;
  978.                                         drv->output_front = 0;
  979.                                         drv->output_rear = 0;
  980.                                         drv->output_count = 0;
  981.                                         drv->output_size = 0;
  982.                                         drv->playing_count = 0;
  983.                                         drv->output_eof = 0;
  984.                                 }
  985.                         }
  986.                         if (((unsigned int)arg == FLUSHR) || 
  987.                             ((unsigned int)arg == FLUSHRW)) {
  988.                                 if (drv->input_active && (file->f_mode & FMODE_READ)) {
  989.                                         wake_up_interruptible(&drv->input_read_wait);
  990.                                         drv->ops->stop_input(drv);
  991.                                         drv->input_active = 0;
  992.                                         drv->input_front = 0;
  993.                                         drv->input_rear = 0;
  994.                                         drv->input_count = 0;
  995.                                         drv->input_size = 0;
  996.                                         drv->input_offset = 0;
  997.                                         drv->recording_count = 0;
  998.                                 }
  999.                                 if ((file->f_mode & FMODE_READ) && 
  1000.                                     (drv->flags & SDF_OPEN_READ)) {
  1001.                                         if (drv->duplex == 2)
  1002.                                                 drv->input_count = drv->output_count;
  1003.                                         drv->ops->start_input(drv, 
  1004.                                                               drv->input_buffers[drv->input_front],
  1005.                                                               drv->input_buffer_size);
  1006.                                         drv->input_active = 1;
  1007.                                 }
  1008.                         }
  1009.                         if (((unsigned int)arg == FLUSHW) || 
  1010.                             ((unsigned int)arg == FLUSHRW)) {
  1011.                                 if ((file->f_mode & FMODE_WRITE) && 
  1012.                                     !(drv->flags & SDF_OPEN_WRITE)) {
  1013.                                         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  1014.                                         sparcaudio_sync_output(drv);
  1015.                                 }
  1016.                         }
  1017.                         break;
  1018.                 case SNDCTL_DSP_RESET:
  1019.                 case AUDIO_FLUSH:
  1020.                         if (drv->output_active && (file->f_mode & FMODE_WRITE)) {
  1021.                                 wake_up_interruptible(&drv->output_write_wait);
  1022.                                 drv->ops->stop_output(drv);
  1023.                                 drv->output_active = 0;
  1024.                                 drv->output_front = 0;
  1025.                                 drv->output_rear = 0;
  1026.                                 drv->output_count = 0;
  1027.                                 drv->output_size = 0;
  1028.                                 drv->playing_count = 0;
  1029.                                 drv->output_offset = 0;
  1030.                                 drv->output_eof = 0;
  1031.                         }
  1032.                         if (drv->input_active && (file->f_mode & FMODE_READ)) {
  1033.                                 wake_up_interruptible(&drv->input_read_wait);
  1034.                                 drv->ops->stop_input(drv);
  1035.                                 drv->input_active = 0;
  1036.                                 drv->input_front = 0;
  1037.                                 drv->input_rear = 0;
  1038.                                 drv->input_count = 0;
  1039.                                 drv->input_size = 0;
  1040.                                 drv->input_offset = 0;
  1041.                                 drv->recording_count = 0;
  1042.                         }
  1043.                         if ((file->f_mode & FMODE_READ) && 
  1044.                             !(drv->flags & SDF_OPEN_READ)) {
  1045.                                 drv->ops->start_input(drv, 
  1046.                                                       drv->input_buffers[drv->input_front],
  1047.                                                       drv->input_buffer_size);
  1048.                                 drv->input_active = 1;
  1049.                         }
  1050.                         if ((file->f_mode & FMODE_WRITE) && 
  1051.                             !(drv->flags & SDF_OPEN_WRITE)) {
  1052.                                 sparcaudio_sync_output(drv);
  1053.                         }
  1054.                         break;
  1055.                 case AUDIO_GETDEV:
  1056.                         if (drv->ops->sunaudio_getdev) {
  1057.                                 audio_device_t tmp;
  1058.       
  1059.                                 retval = verify_area(VERIFY_WRITE, (void *)arg, 
  1060.                                                      sizeof(audio_device_t));
  1061.                                 if (!retval)
  1062.                                         drv->ops->sunaudio_getdev(drv, &tmp);
  1063.                                 copy_to_user((audio_device_t *)arg, &tmp, sizeof(tmp));
  1064.                         } else {
  1065.                                 retval = -EINVAL;
  1066.                         }
  1067.                         break;
  1068.                 case AUDIO_GETDEV_SUNOS:
  1069.                         if (drv->ops->sunaudio_getdev_sunos) {
  1070.                                 int tmp = drv->ops->sunaudio_getdev_sunos(drv);
  1072.                                 retval = verify_area(VERIFY_WRITE, (void *)arg, sizeof(int));
  1073.                                 if (!retval)
  1074.                                         copy_to_user((int *)arg, &tmp, sizeof(tmp));
  1075.                         } else {
  1076.                                 retval = -EINVAL;
  1077.                         }
  1078.                         break;
  1079.                 case AUDIO_GETINFO:
  1080.                         AUDIO_INITINFO(&ainfo);
  1082.                         if (drv->ops->get_input_rate)
  1083.                                 ainfo.record.sample_rate =
  1084.                                         drv->ops->get_input_rate(drv);
  1085.                         else
  1086.                                 ainfo.record.sample_rate = (8000);
  1087.                         if (drv->ops->get_input_channels)
  1088.                                 ainfo.record.channels =
  1089.                                         drv->ops->get_input_channels(drv);
  1090.                         else
  1091.                                 ainfo.record.channels = (1);
  1092.                         if (drv->ops->get_input_precision)
  1093.                                 ainfo.record.precision =
  1094.                                         drv->ops->get_input_precision(drv);
  1095.                         else
  1096.                                 ainfo.record.precision = (8);
  1097.                         if (drv->ops->get_input_encoding)
  1098.                                 ainfo.record.encoding =
  1099.                                         drv->ops->get_input_encoding(drv);
  1100.                         else
  1101.                                 ainfo.record.encoding = (AUDIO_ENCODING_ULAW);
  1102.                         if (drv->ops->get_input_volume)
  1103.                                 ainfo.record.gain =
  1104.                                         drv->ops->get_input_volume(drv);
  1105.                         else
  1106.                                 ainfo.record.gain = (0);
  1107.                         if (drv->ops->get_input_port)
  1108.                                 ainfo.record.port =
  1109.                                         drv->ops->get_input_port(drv);
  1110.                         else
  1111.                                 ainfo.record.port = (0);
  1112.                         if (drv->ops->get_input_ports)
  1113.                                 ainfo.record.avail_ports = 
  1114.                                         drv->ops->get_input_ports(drv);
  1115.                         else
  1116.                                 ainfo.record.avail_ports = (0);
  1118.                         /* To make e.g. vat happy, we let them think they control this */
  1119.                         ainfo.record.buffer_size = drv->buffer_size;
  1120.                         if (drv->ops->get_input_samples)
  1121.                                 ainfo.record.samples = drv->ops->get_input_samples(drv);
  1122.                         else
  1123.                                 ainfo.record.samples = 0;
  1125.                         /* This is undefined in the record context in Solaris */
  1126.                         ainfo.record.eof = 0;
  1127.                         if (drv->ops->get_input_pause)
  1128.                                 ainfo.record.pause =
  1129.                                         drv->ops->get_input_pause(drv);
  1130.                         else
  1131.                                 ainfo.record.pause = 0;
  1132.                         if (drv->ops->get_input_error)
  1133.                                 ainfo.record.error = 
  1134.                                         (unsigned char) drv->ops->get_input_error(drv);
  1135.                         else
  1136.                                 ainfo.record.error = 0;
  1137.                         ainfo.record.waiting = 0;
  1138.                         if (drv->ops->get_input_balance)
  1139.                                 ainfo.record.balance =
  1140.                                         (unsigned char) drv->ops->get_input_balance(drv);
  1141.                         else
  1142.                                 ainfo.record.balance = (unsigned char)(AUDIO_MID_BALANCE);
  1143.                         ainfo.record.minordev = 4 + (minor << SPARCAUDIO_DEVICE_SHIFT);
  1144.                         ainfo.record.open = (drv->flags & SDF_OPEN_READ);
  1145.                         ainfo.record.active = 0;
  1147.                         if (drv->ops->get_output_rate)
  1148.                                 ainfo.play.sample_rate =
  1149.                                         drv->ops->get_output_rate(drv);
  1150.                         else
  1151.                                 ainfo.play.sample_rate = (8000);
  1152.                         if (drv->ops->get_output_channels)
  1153.                                 ainfo.play.channels =
  1154.                                         drv->ops->get_output_channels(drv);
  1155.                         else
  1156.                                 ainfo.play.channels = (1);
  1157.                         if (drv->ops->get_output_precision)
  1158.                                 ainfo.play.precision =
  1159.                                         drv->ops->get_output_precision(drv);
  1160.                         else
  1161.                                 ainfo.play.precision = (8);
  1162.                         if (drv->ops->get_output_encoding)
  1163.                                 ainfo.play.encoding =
  1164.                                         drv->ops->get_output_encoding(drv);
  1165.                         else
  1166.                                 ainfo.play.encoding = (AUDIO_ENCODING_ULAW);
  1167.                         if (drv->ops->get_output_volume)
  1168.                                 ainfo.play.gain =
  1169.                                         drv->ops->get_output_volume(drv);
  1170.                         else
  1171.                                 ainfo.play.gain = (0);
  1172.                         if (drv->ops->get_output_port)
  1173.                                 ainfo.play.port =
  1174.                                         drv->ops->get_output_port(drv);
  1175.                         else
  1176.                                 ainfo.play.port = (0);
  1177.                         if (drv->ops->get_output_ports)
  1178.                                 ainfo.play.avail_ports = 
  1179.                                         drv->ops->get_output_ports(drv);
  1180.                         else
  1181.                                 ainfo.play.avail_ports = (0);
  1183.                         /* This is not defined in the play context in Solaris */
  1184.                         ainfo.play.buffer_size = 0;
  1185.                         if (drv->ops->get_output_samples)
  1186.                                 ainfo.play.samples = drv->ops->get_output_samples(drv);
  1187.                         else
  1188.                                 ainfo.play.samples = 0;
  1189.                         ainfo.play.eof = drv->output_eof;
  1190.                         if (drv->ops->get_output_pause)
  1191.                                 ainfo.play.pause =
  1192.                                         drv->ops->get_output_pause(drv);
  1193.                         else
  1194.                                 ainfo.play.pause = 0;
  1195.                         if (drv->ops->get_output_error)
  1196.                                 ainfo.play.error =
  1197.                                         (unsigned char)drv->ops->get_output_error(drv);
  1198.                         else
  1199.                                 ainfo.play.error = 0;
  1200.                         ainfo.play.waiting = waitqueue_active(&drv->open_wait);
  1201.                         if (drv->ops->get_output_balance)
  1202.                                 ainfo.play.balance =
  1203.                                         (unsigned char)drv->ops->get_output_balance(drv);
  1204.                         else
  1205.                                 ainfo.play.balance = (unsigned char)(AUDIO_MID_BALANCE);
  1206.                         ainfo.play.minordev = 4 + (minor << SPARCAUDIO_DEVICE_SHIFT);
  1207.                         ainfo.play.open = (drv->flags & SDF_OPEN_WRITE);
  1208.                         ainfo.play.active = drv->output_active;
  1209.     
  1210.                         if (drv->ops->get_monitor_volume)
  1211.                                 ainfo.monitor_gain =
  1212.                                         drv->ops->get_monitor_volume(drv);
  1213.                         else
  1214.                                 ainfo.monitor_gain = (0);
  1216.                         if (drv->ops->get_output_muted)
  1217.                                 ainfo.output_muted = 
  1218.                                         (unsigned char)drv->ops->get_output_muted(drv);
  1219.                         else
  1220.                                 ainfo.output_muted = (unsigned char)(0);
  1222.                         retval = verify_area(VERIFY_WRITE, (void *)arg,
  1223.                                              sizeof(struct audio_info));
  1224.                         if (retval < 0)
  1225.                                 break;
  1227.                         copy_to_user((struct audio_info *)arg, &ainfo, sizeof(ainfo));
  1228.                         break;
  1229.                 case AUDIO_SETINFO:
  1230.                 {
  1231.                         audio_info_t curinfo, newinfo;
  1232.       
  1233.                         if (verify_area(VERIFY_READ, (audio_info_t *)arg, 
  1234.                                         sizeof(audio_info_t))) {
  1235.                                 dprintk(("verify_area failedn"));
  1236.                                 return -EINVAL;
  1237.                         }
  1238.                         copy_from_user(&ainfo, (audio_info_t *)arg, sizeof(audio_info_t));
  1240.                         /* Without these there's no point in trying */
  1241.                         if (!drv->ops->get_input_precision ||
  1242.                             !drv->ops->get_input_channels ||
  1243.                             !drv->ops->get_input_rate ||
  1244.                             !drv->ops->get_input_encoding ||
  1245.                             !drv->ops->get_output_precision ||
  1246.                             !drv->ops->get_output_channels ||
  1247.                             !drv->ops->get_output_rate ||
  1248.                             !drv->ops->get_output_encoding) {
  1249.                                 eprintk(("missing get routines: failedn"));
  1250.                                 retval = -EINVAL;
  1251.                                 break;
  1252.                         }
  1254.                         /* Do bounds checking for things which always apply.
  1255.                          * Follow with enforcement of basic tenets of certain
  1256.                          * encodings. Everything over and above generic is
  1257.                          * enforced by the driver, which can assume that
  1258.                          * Martian cases are taken care of here.
  1259.                          */
  1260.                         if (Modify(ainfo.play.gain) && 
  1261.                             ((ainfo.play.gain > AUDIO_MAX_GAIN) || 
  1262.                              (ainfo.play.gain < AUDIO_MIN_GAIN))) {
  1263.                                 /* Need to differentiate this from e.g. the above error */
  1264.                                 eprintk(("play gain bounds: failed %dn", ainfo.play.gain));
  1265.                                 retval = -EINVAL;
  1266.                                 break;
  1267.                         }
  1268.                         if (Modify(ainfo.record.gain) &&
  1269.                             ((ainfo.record.gain > AUDIO_MAX_GAIN) ||
  1270.                              (ainfo.record.gain < AUDIO_MIN_GAIN))) {
  1271.                                 eprintk(("rec gain bounds: failed %dn", ainfo.record.gain));
  1272.                                 retval = -EINVAL;
  1273.                                 break;
  1274.                         }
  1275.                         if (Modify(ainfo.monitor_gain) &&
  1276.                             ((ainfo.monitor_gain > AUDIO_MAX_GAIN) ||
  1277.                              (ainfo.monitor_gain < AUDIO_MIN_GAIN))) {
  1278.                                 eprintk(("monitor gain bounds: failedn"));
  1279.                                 retval = -EINVAL;
  1280.                                 break;
  1281.                         }
  1283.                         /* Don't need to check less than zero on these */
  1284.                         if (Modifyc(ainfo.play.balance) &&
  1285.                             (ainfo.play.balance > AUDIO_RIGHT_BALANCE)) {
  1286.                                 eprintk(("play balance bounds: %d failedn", 
  1287.                                          (int)ainfo.play.balance));
  1288.                                 retval = -EINVAL;
  1289.                                 break;
  1290.                         }
  1291.                         if (Modifyc(ainfo.record.balance) &&
  1292.                             (ainfo.record.balance > AUDIO_RIGHT_BALANCE)) {
  1293.                                 eprintk(("rec balance bounds: failedn"));
  1294.                                 retval = -EINVAL;
  1295.                                 break;
  1296.                         }
  1297.       
  1298.                         /* If any of these changed, record them all, then make
  1299.                          * changes atomically. If something fails, back it all out.
  1300.                          */
  1301.                         if (Modify(ainfo.record.precision) || 
  1302.                             Modify(ainfo.record.sample_rate) ||
  1303.                             Modify(ainfo.record.channels) ||
  1304.                             Modify(ainfo.record.encoding) || 
  1305.                             Modify(ainfo.play.precision) || 
  1306.                             Modify(ainfo.play.sample_rate) ||
  1307.                             Modify(ainfo.play.channels) ||
  1308.                             Modify(ainfo.play.encoding)) {
  1309.                                 /* If they're trying to change something we
  1310.                                  * have no routine for, they lose.
  1311.                                  */
  1312.                                 if ((!drv->ops->set_input_encoding && 
  1313.                                      Modify(ainfo.record.encoding)) ||
  1314.                                     (!drv->ops->set_input_rate && 
  1315.                                      Modify(ainfo.record.sample_rate)) ||
  1316.                                     (!drv->ops->set_input_precision && 
  1317.                                      Modify(ainfo.record.precision)) ||
  1318.                                     (!drv->ops->set_input_channels && 
  1319.                                      Modify(ainfo.record.channels))) {
  1320.                                         eprintk(("rec set no routines: failedn"));
  1321.                                         retval = -EINVAL;
  1322.                                         break;
  1323.                                 }   
  1324.   
  1325.                                 curinfo.record.encoding = 
  1326.                                         drv->ops->get_input_encoding(drv);
  1327.                                 curinfo.record.sample_rate = 
  1328.                                         drv->ops->get_input_rate(drv);    
  1329.                                 curinfo.record.precision = 
  1330.                                         drv->ops->get_input_precision(drv);    
  1331.                                 curinfo.record.channels = 
  1332.                                         drv->ops->get_input_channels(drv);    
  1333.                                 newinfo.record.encoding =
  1334.                                         Modify(ainfo.record.encoding) ? 
  1335.                                         ainfo.record.encoding :
  1336.                                         curinfo.record.encoding;
  1337.                                 newinfo.record.sample_rate =
  1338.                                         Modify(ainfo.record.sample_rate) ?
  1339.                                         ainfo.record.sample_rate :
  1340.                                         curinfo.record.sample_rate;
  1341.                                 newinfo.record.precision =
  1342.                                         Modify(ainfo.record.precision) ? 
  1343.                                         ainfo.record.precision :
  1344.                                         curinfo.record.precision;
  1345.                                 newinfo.record.channels =
  1346.                                         Modify(ainfo.record.channels) ? 
  1347.                                         ainfo.record.channels :
  1348.                                         curinfo.record.channels;
  1349.     
  1350.                                 switch (newinfo.record.encoding) {
  1351.                                 case AUDIO_ENCODING_ALAW:
  1352.                                 case AUDIO_ENCODING_ULAW:
  1353.                                         if (newinfo.record.precision != 8) {
  1354.                                                 eprintk(("rec law precision bounds: "
  1355.                                                          "failedn"));
  1356.                                                 retval = -EINVAL;
  1357.                                                 break;
  1358.                                         }
  1359.                                         if (newinfo.record.channels != 1) {
  1360.                                                 eprintk(("rec law channel bounds: "
  1361.                                                          "failedn"));
  1362.                                                 retval = -EINVAL;
  1363.                                                 break;
  1364.                                         }
  1365.                                         break;
  1366.                                 case AUDIO_ENCODING_LINEAR:
  1367.                                 case AUDIO_ENCODING_LINEARLE:
  1368.                                         if (newinfo.record.precision != 16) {
  1369.                                                 eprintk(("rec lin precision bounds: "
  1370.                                                          "failedn"));
  1371.                                                 retval = -EINVAL;
  1372.                                                 break;
  1373.                                         }
  1374.                                         if (newinfo.record.channels != 1 &&
  1375.                                             newinfo.record.channels != 2) {
  1376.                                                 eprintk(("rec lin channel bounds: "
  1377.                                                          "failedn"));
  1378.                                                 retval = -EINVAL;
  1379.                                                 break;
  1380.                                         }
  1381.                                         break;
  1382.                                 case AUDIO_ENCODING_LINEAR8:
  1383.                                         if (newinfo.record.precision != 8) {
  1384.                                                 eprintk(("rec lin8 precision bounds: "
  1385.                                                          "failedn"));
  1386.                                                 retval = -EINVAL;
  1387.                                                 break;
  1388.                                         }
  1389.                                         if (newinfo.record.channels != 1 && 
  1390.                                             newinfo.record.channels != 2) {
  1391.                                                 eprintk(("rec lin8 channel bounds: "
  1392.                                                          "failedn"));
  1393.                                                 retval = -EINVAL;
  1394.                                                 break;
  1395.                                         }
  1396.                                 };
  1397.   
  1398.                                 if (retval < 0)
  1399.                                         break;
  1400.   
  1401.                                 /* If they're trying to change something we
  1402.                                  * have no routine for, they lose.
  1403.                                  */
  1404.                                 if ((!drv->ops->set_output_encoding && 
  1405.                                      Modify(ainfo.play.encoding)) ||
  1406.                                     (!drv->ops->set_output_rate && 
  1407.                                      Modify(ainfo.play.sample_rate)) ||
  1408.                                     (!drv->ops->set_output_precision && 
  1409.                                      Modify(ainfo.play.precision)) ||
  1410.                                     (!drv->ops->set_output_channels && 
  1411.                                      Modify(ainfo.play.channels))) {
  1412.                                         eprintk(("play set no routine: failedn"));
  1413.                                         retval = -EINVAL;
  1414.                                         break;
  1415.                                 }   
  1416.   
  1417.                                 curinfo.play.encoding = 
  1418.                                         drv->ops->get_output_encoding(drv);
  1419.                                 curinfo.play.sample_rate = 
  1420.                                         drv->ops->get_output_rate(drv);    
  1421.                                 curinfo.play.precision = 
  1422.                                         drv->ops->get_output_precision(drv);    
  1423.                                 curinfo.play.channels = 
  1424.                                         drv->ops->get_output_channels(drv);    
  1425.                                 newinfo.play.encoding =
  1426.                                         Modify(ainfo.play.encoding) ? 
  1427.                                         ainfo.play.encoding :
  1428.                                                 curinfo.play.encoding;
  1429.                                 newinfo.play.sample_rate =
  1430.                                         Modify(ainfo.play.sample_rate) ? 
  1431.                                         ainfo.play.sample_rate :
  1432.                                                 curinfo.play.sample_rate;
  1433.                                 newinfo.play.precision =
  1434.                                         Modify(ainfo.play.precision) ? 
  1435.                                         ainfo.play.precision :
  1436.                                                 curinfo.play.precision;
  1437.                                 newinfo.play.channels =
  1438.                                         Modify(ainfo.play.channels) ? 
  1439.                                         ainfo.play.channels :
  1440.                                                 curinfo.play.channels;
  1441.   
  1442.                                 switch (newinfo.play.encoding) {
  1443.                                 case AUDIO_ENCODING_ALAW:
  1444.                                 case AUDIO_ENCODING_ULAW:
  1445.                                         if (newinfo.play.precision != 8) {
  1446.                                                 eprintk(("play law precision bounds: "
  1447.                                                          "failedn"));
  1448.                                                 retval = -EINVAL;
  1449.                                                 break;
  1450.                                         }
  1451.                                         if (newinfo.play.channels != 1) {
  1452.                                                 eprintk(("play law channel bounds: "
  1453.                                                          "failedn"));
  1454.                                                 retval = -EINVAL;
  1455.                                                 break;
  1456.                                         }
  1457.                                         break;
  1458.                                 case AUDIO_ENCODING_LINEAR:
  1459.                                 case AUDIO_ENCODING_LINEARLE:
  1460.                                         if (newinfo.play.precision != 16) {
  1461.                                                 eprintk(("play lin precision bounds: "
  1462.                                                          "failedn"));
  1463.                                                 retval = -EINVAL;
  1464.                                                 break;
  1465.                                         }
  1466.                                         if (newinfo.play.channels != 1 && 
  1467.                                             newinfo.play.channels != 2) {
  1468.                                                 eprintk(("play lin channel bounds: "
  1469.                                                          "failedn"));
  1470.                                                 retval = -EINVAL;
  1471.                                                 break;
  1472.                                         }
  1473.                                         break;
  1474.                                 case AUDIO_ENCODING_LINEAR8:
  1475.                                         if (newinfo.play.precision != 8) {
  1476.                                                 eprintk(("play lin8 precision bounds: "
  1477.                                                          "failedn"));
  1478.                                                 retval = -EINVAL;
  1479.                                                 break;
  1480.                                         }
  1481.                                         if (newinfo.play.channels != 1 && 
  1482.                                             newinfo.play.channels != 2) {
  1483.                                                 eprintk(("play lin8 channel bounds: "
  1484.                                                          "failedn"));
  1485.                                                 retval = -EINVAL;
  1486.                                                 break;
  1487.                                         }
  1488.                                 };
  1489.   
  1490.                                 if (retval < 0)
  1491.                                         break;
  1492.   
  1493.                                 /* If we got this far, we're at least sane with
  1494.                                  * respect to generics. Try the changes.
  1495.                                  */
  1496.                                 if ((drv->ops->set_input_channels &&
  1497.                                      (drv->ops->set_input_channels(drv, 
  1498.                                                                    newinfo.record.channels)
  1499.                                       < 0)) ||
  1500.                                     (drv->ops->set_output_channels &&
  1501.                                      (drv->ops->set_output_channels(drv, 
  1502.                                                                     newinfo.play.channels)
  1503.                                       < 0)) ||
  1504.                                     (drv->ops->set_input_rate &&
  1505.                                      (drv->ops->set_input_rate(drv, 
  1506.                                                                newinfo.record.sample_rate) 
  1507.                                       < 0)) ||
  1508.                                     (drv->ops->set_output_rate &&
  1509.                                      (drv->ops->set_output_rate(drv, 
  1510.                                                                 newinfo.play.sample_rate) 
  1511.                                       < 0)) ||
  1512.                                     (drv->ops->set_input_precision &&
  1513.                                      (drv->ops->set_input_precision(drv, 
  1514.                                                                     newinfo.record.precision)
  1515.                                       < 0)) ||
  1516.                                     (drv->ops->set_output_precision &&
  1517.                                      (drv->ops->set_output_precision(drv, 
  1518.                                                                      newinfo.play.precision)
  1519.                                       < 0)) ||
  1520.                                     (drv->ops->set_input_encoding &&
  1521.                                      (drv->ops->set_input_encoding(drv, 
  1522.                                                                    newinfo.record.encoding)
  1523.                                       < 0)) ||
  1524.                                     (drv->ops->set_output_encoding &&
  1525.                                      (drv->ops->set_output_encoding(drv, 
  1526.                                                                     newinfo.play.encoding)
  1527.                                       < 0))) 
  1528.                                 {
  1529.                                         dprintk(("setting format: failedn"));
  1530.                                         /* Pray we can set it all back. If not, uh... */
  1531.                                         if (drv->ops->set_input_channels)
  1532.                                                 drv->ops->set_input_channels(drv, 
  1533.      curinfo.record.channels);
  1534.                                         if (drv->ops->set_output_channels)
  1535.                                                 drv->ops->set_output_channels(drv, 
  1536.                                                                               curinfo.play.channels);
  1537.                                         if (drv->ops->set_input_rate)
  1538.                                                 drv->ops->set_input_rate(drv, 
  1539.                                                                          curinfo.record.sample_rate);
  1540.                                         if (drv->ops->set_output_rate)
  1541.                                                 drv->ops->set_output_rate(drv, 
  1542.                                                                           curinfo.play.sample_rate);
  1543.                                         if (drv->ops->set_input_precision)
  1544.                                                 drv->ops->set_input_precision(drv, 
  1545.                                                                               curinfo.record.precision);
  1546.                                         if (drv->ops->set_output_precision)
  1547.                                                 drv->ops->set_output_precision(drv, 
  1548.                                                                                curinfo.play.precision);
  1549.                                         if (drv->ops->set_input_encoding)
  1550.                                                 drv->ops->set_input_encoding(drv, 
  1551.                                                                              curinfo.record.encoding);
  1552.                                         if (drv->ops->set_output_encoding)
  1553.                                                 drv->ops->set_output_encoding(drv, 
  1554.                                                                               curinfo.play.encoding);
  1555.                                         retval = -EINVAL;
  1556.                                         break;
  1557.                                 }
  1558.                         }
  1559.                         
  1560.                         if (retval < 0)
  1561.                                 break;
  1562.                         
  1563.                         newinfo.record.balance =
  1564.                                 __sparcaudio_if_setc_do(drv, 
  1565.                                                         drv->ops->set_input_balance, 
  1566.                                                         drv->ops->get_input_balance,
  1567.                                                         ainfo.record.balance);
  1568.                         newinfo.play.balance =
  1569.                                 __sparcaudio_if_setc_do(drv, 
  1570.                                                         drv->ops->set_output_balance, 
  1571.                                                         drv->ops->get_output_balance,
  1572.                                                         ainfo.play.balance);
  1573.                         newinfo.record.error =
  1574.                                 __sparcaudio_if_setc_do(drv, 
  1575.                                                         drv->ops->set_input_error, 
  1576.                                                         drv->ops->get_input_error,
  1577.                                                         ainfo.record.error);
  1578.                         newinfo.play.error =
  1579.                                 __sparcaudio_if_setc_do(drv, 
  1580.                                                         drv->ops->set_output_error, 
  1581.                                                         drv->ops->get_output_error,
  1582.                                                         ainfo.play.error);
  1583.                         newinfo.output_muted =
  1584.                                 __sparcaudio_if_setc_do(drv, 
  1585.                                                         drv->ops->set_output_muted, 
  1586.                                                         drv->ops->get_output_muted,
  1587.                                                         ainfo.output_muted);
  1588.                         newinfo.record.gain =
  1589.                                 __sparcaudio_if_set_do(drv, 
  1590.                                                        drv->ops->set_input_volume, 
  1591.                                                        drv->ops->get_input_volume,
  1592.                                                        ainfo.record.gain);
  1593.                         newinfo.play.gain =
  1594.                                 __sparcaudio_if_set_do(drv, 
  1595.                                                        drv->ops->set_output_volume, 
  1596.                                                        drv->ops->get_output_volume,
  1597.                                                        ainfo.play.gain);
  1598.                         newinfo.record.port =
  1599.                                 __sparcaudio_if_set_do(drv, 
  1600.                                                        drv->ops->set_input_port, 
  1601.                                                        drv->ops->get_input_port,
  1602.                                                        ainfo.record.port);
  1603.                         newinfo.play.port =
  1604.                                 __sparcaudio_if_set_do(drv, 
  1605.                                                        drv->ops->set_output_port, 
  1606.                                                        drv->ops->get_output_port,
  1607.                                                        ainfo.play.port);
  1608.                         newinfo.record.samples =
  1609.                                 __sparcaudio_if_set_do(drv, 
  1610.                                                        drv->ops->set_input_samples, 
  1611.                                                        drv->ops->get_input_samples,
  1612.                                                        ainfo.record.samples);
  1613.                         newinfo.play.samples =
  1614.                                 __sparcaudio_if_set_do(drv, 
  1615.                                                        drv->ops->set_output_samples, 
  1616.                                                        drv->ops->get_output_samples,
  1617.                                                        ainfo.play.samples);
  1618.                         newinfo.monitor_gain =
  1619.                                 __sparcaudio_if_set_do(drv, 
  1620.                                                        drv->ops->set_monitor_volume, 
  1621.                                                        drv->ops->get_monitor_volume,
  1622.                                                        ainfo.monitor_gain);
  1624.                         if (Modify(ainfo.record.buffer_size)) {
  1625.                                 /* Should sanity check this */
  1626.                                 newinfo.record.buffer_size = ainfo.record.buffer_size;
  1627.                                 drv->buffer_size = ainfo.record.buffer_size;
  1628.                         } else {
  1629.                                 newinfo.record.buffer_size = drv->buffer_size;
  1630.                         }
  1632.                         if (Modify(ainfo.play.eof)) {
  1633.                                 ainfo.play.eof = newinfo.play.eof;
  1634.                                 newinfo.play.eof = drv->output_eof;
  1635.                                 drv->output_eof = ainfo.play.eof;
  1636.                         } else {
  1637.                                 newinfo.play.eof = drv->output_eof;
  1638.                         }
  1640.                         if (drv->flags & SDF_OPEN_READ) {
  1641.                                 newinfo.record.pause =
  1642.                                         __sparcaudio_if_setc_do(drv, 
  1643.                                                                 drv->ops->set_input_pause, 
  1644.                                                                 drv->ops->get_input_pause,
  1645.                                                                 ainfo.record.pause);
  1646.                         } else if (drv->ops->get_input_pause) {
  1647.                                 newinfo.record.pause = drv->ops->get_input_pause(drv);
  1648.                         } else {
  1649.                                 newinfo.record.pause = 0;
  1650.                         }
  1652.                         if (drv->flags & SDF_OPEN_WRITE) {
  1653.                                 newinfo.play.pause =
  1654.                                         __sparcaudio_if_setc_do(drv, 
  1655.                                                                 drv->ops->set_output_pause, 
  1656.                                                                 drv->ops->get_output_pause,
  1657.                                                                 ainfo.play.pause);
  1658.                         } else if (drv->ops->get_output_pause) {
  1659.                                 newinfo.play.pause = drv->ops->get_output_pause(drv);
  1660.                         } else {
  1661.                                 newinfo.play.pause = 0;
  1662.                         }
  1663.       
  1664.                         retval = verify_area(VERIFY_WRITE, (void *)arg,
  1665.                                              sizeof(struct audio_info));
  1667.                         /* Even if we fail, if we made changes let's try notification */
  1668.                         if (!retval) 
  1669.                                 copy_to_user((struct audio_info *)arg, &newinfo, 
  1670.                                              sizeof(newinfo));
  1671.     
  1672. #ifdef REAL_AUDIO_SIGNALS
  1673.                         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  1674. #endif
  1675.                         break;
  1676.                 }
  1677.   
  1678.                 default:
  1679.                         if (drv->ops->ioctl)
  1680.                                 retval = drv->ops->ioctl(inode,file,cmd,arg,drv);
  1681.                         else
  1682.                                 retval = -EINVAL;
  1683.                 };
  1684.                 break;
  1685. case SPARCAUDIO_STATUS_MINOR:
  1686.                 eprintk(("status minor not yet implementedn"));
  1687.                 retval = -EINVAL;
  1688. default:
  1689.                 eprintk(("unknown minor device numbern"));
  1690.                 retval = -EINVAL;
  1691. }
  1693. return retval;
  1694. }
  1696. static struct file_operations sparcaudioctl_fops = {
  1697. owner: THIS_MODULE,
  1698. poll: sparcaudio_poll,
  1699. ioctl: sparcaudio_ioctl,
  1700. };
  1702. static int sparcaudio_open(struct inode * inode, struct file * file)
  1703. {
  1704.         int minor = MINOR(inode->i_rdev);
  1705. struct sparcaudio_driver *drv = 
  1706.                 drivers[(minor >> SPARCAUDIO_DEVICE_SHIFT)];
  1707. int err;
  1709. /* A low-level audio driver must exist. */
  1710. if (!drv)
  1711. return -ENODEV;
  1713. #ifdef S_ZERO_WR
  1714.         /* This is how 2.0 ended up dealing with 0 len writes */
  1715.         inode->i_flags |= S_ZERO_WR;
  1716. #endif
  1718. switch (minor & 0xf) {
  1719. case SPARCAUDIO_AUDIOCTL_MINOR:
  1720.                 file->f_op = &sparcaudioctl_fops;
  1721.                 break;
  1722. case SPARCAUDIO_DSP16_MINOR:
  1723. case SPARCAUDIO_DSP_MINOR:
  1724. case SPARCAUDIO_AUDIO_MINOR:
  1725.                 /* If the driver is busy, then wait to get through. */
  1726.         retry_open:
  1727.          if (file->f_mode & FMODE_READ && drv->flags & SDF_OPEN_READ) {
  1728.                         if (file->f_flags & O_NONBLOCK)
  1729.                                 return -EBUSY;
  1731.                         /* If something is now waiting, signal control device */
  1732.                         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  1734.                         interruptible_sleep_on(&drv->open_wait);
  1735.                         if (signal_pending(current))
  1736.                                 return -EINTR;
  1737.                         goto retry_open;
  1738.                 }
  1739.                 if (file->f_mode & FMODE_WRITE && drv->flags & SDF_OPEN_WRITE) {
  1740.                         if (file->f_flags & O_NONBLOCK)
  1741.                                 return -EBUSY;
  1742.     
  1743.                         /* If something is now waiting, signal control device */
  1744.                         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  1746.                         interruptible_sleep_on(&drv->open_wait);
  1747.                         if (signal_pending(current))
  1748.                                 return -EINTR;
  1749.                         goto retry_open;
  1750.                 }
  1752.                 /* Allow the low-level driver to initialize itself. */
  1753.                 if (drv->ops->open) {
  1754.                         err = drv->ops->open(inode,file,drv);
  1755.                         if (err < 0)
  1756.                                 return err;
  1757.                 }
  1759.                 /* Mark the driver as locked for read and/or write. */
  1760.                 if (file->f_mode & FMODE_READ) {
  1761.                         drv->input_offset = 0;
  1762.                         drv->input_front = 0;
  1763.                         drv->input_rear = 0;
  1764.                         drv->input_count = 0;
  1765.                         drv->input_size = 0;
  1766.                         drv->recording_count = 0;
  1768.                         /* Clear pause */
  1769.                         if (drv->ops->set_input_pause)
  1770.                                 drv->ops->set_input_pause(drv, 0); 
  1771.                         drv->ops->start_input(drv, drv->input_buffers[drv->input_front],
  1772.                                               drv->input_buffer_size);
  1773.                         drv->input_active = 1;
  1774.                         drv->flags |= SDF_OPEN_READ;
  1775.                 }
  1777.                 if (file->f_mode & FMODE_WRITE) {
  1778.                         drv->output_offset = 0;
  1779.                         drv->output_eof = 0;
  1780.                         drv->playing_count = 0;
  1781.                         drv->output_size = 0;
  1782.                         drv->output_front = 0;
  1783.                         drv->output_rear = 0;
  1784.                         drv->output_count = 0;
  1785.                         drv->output_active = 0;
  1787.                         /* Clear pause */
  1788.                         if (drv->ops->set_output_pause)
  1789.                                 drv->ops->set_output_pause(drv, 0); 
  1790.                         drv->flags |= SDF_OPEN_WRITE;
  1791.                 }  
  1793.                 break;
  1794. case SPARCAUDIO_MIXER_MINOR:     
  1795.                 file->f_op = &sparcaudioctl_fops;
  1796.                 break;
  1798. default:
  1799.                 return -ENXIO;
  1800. };
  1802.         /* From the dbri driver:
  1803.          * SunOS 5.5.1 audio(7I) man page says:
  1804.          * "Upon the initial open() of the audio device, the driver
  1805.          *  will reset the data format of the device to the default
  1806.          *  state of 8-bit, 8KHz, mono u-law data."
  1807.          *
  1808.          * Of course, we only do this for /dev/audio, and assume
  1809.          * OSS semantics on /dev/dsp
  1810.          */
  1812. if ((minor & 0xf) == SPARCAUDIO_AUDIO_MINOR) {
  1813.                 if (file->f_mode & FMODE_WRITE) {
  1814.                         if (drv->ops->set_output_channels)
  1815.                                 drv->ops->set_output_channels(drv, 1);
  1816.                         if (drv->ops->set_output_encoding)
  1817.                                 drv->ops->set_output_encoding(drv, AUDIO_ENCODING_ULAW);
  1818.                         if (drv->ops->set_output_rate)
  1819.                                 drv->ops->set_output_rate(drv, 8000);
  1820.                 }          
  1822.                 if (file->f_mode & FMODE_READ) {
  1823.                         if (drv->ops->set_input_channels)
  1824.                                 drv->ops->set_input_channels(drv, 1);
  1825.                         if (drv->ops->set_input_encoding)
  1826.                                 drv->ops->set_input_encoding(drv, AUDIO_ENCODING_ULAW);
  1827.                         if (drv->ops->set_input_rate)
  1828.                                 drv->ops->set_input_rate(drv, 8000);
  1829.                 }          
  1830.         }
  1832. /* Success! */
  1833. return 0;
  1834. }
  1836. static int sparcaudio_release(struct inode * inode, struct file * file)
  1837. {
  1838.         struct sparcaudio_driver *drv = drivers[(MINOR(inode->i_rdev) >>
  1839.                                                  SPARCAUDIO_DEVICE_SHIFT)];
  1841. lock_kernel();
  1842.         if (file->f_mode & FMODE_READ) {
  1843.                 /* Stop input */
  1844.                 drv->ops->stop_input(drv);
  1845.                 drv->input_active = 0;
  1846.         }
  1848.         if (file->f_mode & FMODE_WRITE) {
  1849.                 /* Anything in the queue? */
  1850.                 if (drv->output_offset) {
  1851.                         drv->output_offset = 0;
  1852.                         drv->output_rear = (drv->output_rear + 1)
  1853.                                 % drv->num_output_buffers;
  1854.                         drv->output_count++;
  1855.                 }
  1856.                 sparcaudio_sync_output(drv);
  1858.                 /* Wait for any output still in the queue to be played. */
  1859.                 if ((drv->output_count > 0) || (drv->playing_count > 0))
  1860.                         interruptible_sleep_on(&drv->output_drain_wait);
  1862.                 /* Force any output to be stopped. */
  1863.                 drv->ops->stop_output(drv);
  1864.                 drv->output_active = 0;
  1865.                 drv->playing_count = 0;
  1866.                 drv->output_eof = 0;
  1867.         }
  1869.         /* Let the low-level driver do any release processing. */
  1870.         if (drv->ops->release)
  1871.                 drv->ops->release(inode,file,drv);
  1873.         if (file->f_mode & FMODE_READ)
  1874.                 drv->flags &= ~(SDF_OPEN_READ);
  1876.         if (file->f_mode & FMODE_WRITE) 
  1877.                 drv->flags &= ~(SDF_OPEN_WRITE);
  1879.         /* Status changed. Signal control device */
  1880.         kill_procs(drv->sd_siglist,SIGPOLL,S_MSG);
  1882.         wake_up_interruptible(&drv->open_wait);
  1883. unlock_kernel();
  1885.         return 0;
  1886. }
  1888. static struct file_operations sparcaudio_fops = {
  1889. owner: THIS_MODULE,
  1890. llseek: no_llseek,
  1891. read: sparcaudio_read,
  1892. write: sparcaudio_write,
  1893. poll: sparcaudio_poll,
  1894. ioctl: sparcaudio_ioctl,
  1895. open: sparcaudio_open,
  1896. release: sparcaudio_release,
  1897. };
  1899. static struct {
  1900. unsigned short minor;
  1901. char *name;
  1902. umode_t mode;
  1903. } dev_list[] = {
  1904. { SPARCAUDIO_MIXER_MINOR, "mixer", S_IWUSR | S_IRUGO },
  1905. { SPARCAUDIO_DSP_MINOR, "dsp", S_IWUGO | S_IRUSR | S_IRGRP },
  1906. { SPARCAUDIO_AUDIO_MINOR, "audio", S_IWUGO | S_IRUSR | S_IRGRP },
  1907. { SPARCAUDIO_DSP16_MINOR, "dspW", S_IWUGO | S_IRUSR | S_IRGRP },
  1908. { SPARCAUDIO_STATUS_MINOR, "status", S_IRUGO },
  1909. { SPARCAUDIO_AUDIOCTL_MINOR, "audioctl", S_IRUGO }
  1910. };
  1912. static void sparcaudio_mkname (char *buf, char *name, int dev)
  1913. {
  1914.         if (dev)
  1915.                 sprintf (buf, "%s%d", name, dev);
  1916.         else
  1917.                 sprintf (buf, "%s", name);
  1918. }
  1920. int register_sparcaudio_driver(struct sparcaudio_driver *drv, int duplex)
  1921. {
  1922. int i, dev;
  1923. unsigned short minor;
  1924. char name_buf[32];
  1926. /* If we've used up SPARCAUDIO_MAX_DEVICES, fail */
  1927. for (dev = 0; dev < SPARCAUDIO_MAX_DEVICES; dev++) {
  1928.                 if (drivers[dev] == NULL)
  1929.                         break;
  1930. }
  1932. if (drivers[dev])
  1933.                 return -EIO;
  1935. /* Ensure that the driver has a proper operations structure. */
  1936. if (!drv->ops || !drv->ops->start_output || !drv->ops->stop_output ||
  1937.     !drv->ops->start_input || !drv->ops->stop_input)
  1938. return -EINVAL;
  1940.         /* Register ourselves with devfs */
  1941. for (i=0; i < sizeof (dev_list) / sizeof (*dev_list); i++) {
  1942. sparcaudio_mkname (name_buf, dev_list[i].name, dev);
  1943. minor = (dev << SPARCAUDIO_DEVICE_SHIFT) | dev_list[i].minor;
  1944. devfs_register (devfs_handle, name_buf, DEVFS_FL_NONE,
  1945. SOUND_MAJOR, minor, S_IFCHR | dev_list[i].mode,
  1946. &sparcaudio_fops, NULL);
  1947. }
  1949.         /* Setup the circular queues of output and input buffers
  1950.          *
  1951.          * Each buffer is a single page, but output buffers might
  1952.          * be partially filled (by a write with count < output_buffer_size),
  1953.          * so each output buffer also has a paired output size.
  1954.          *
  1955.          * Input buffers, on the other hand, always fill completely,
  1956.          * so we don't need input counts - each contains input_buffer_size
  1957.          * bytes of audio data.
  1958.          *
  1959.          * TODO: Make number of input/output buffers tunable parameters
  1960.          */
  1962.         init_waitqueue_head(&drv->open_wait);
  1963.         init_waitqueue_head(&drv->output_write_wait);
  1964.         init_waitqueue_head(&drv->output_drain_wait);
  1965.         init_waitqueue_head(&drv->input_read_wait);
  1967.         drv->num_output_buffers = 8;
  1968. drv->output_buffer_size = (4096 * 2);
  1969. drv->playing_count = 0;
  1970. drv->output_offset = 0;
  1971. drv->output_eof = 0;
  1972.         drv->output_front = 0;
  1973.         drv->output_rear = 0;
  1974.         drv->output_count = 0;
  1975.         drv->output_active = 0;
  1976.         drv->output_buffers = kmalloc(drv->num_output_buffers * 
  1977.       sizeof(__u8 *), GFP_KERNEL);
  1978.         drv->output_sizes = kmalloc(drv->num_output_buffers * 
  1979.     sizeof(size_t), GFP_KERNEL);
  1980.         drv->output_notify = kmalloc(drv->num_output_buffers * 
  1981.     sizeof(char), GFP_KERNEL);
  1982.         if (!drv->output_buffers || !drv->output_sizes || !drv->output_notify)
  1983.                 goto kmalloc_failed1;
  1985. drv->output_buffer = kmalloc((drv->output_buffer_size * 
  1986.                                       drv->num_output_buffers),
  1987.                                      GFP_KERNEL);
  1988. if (!drv->output_buffer)
  1989.                 goto kmalloc_failed2;
  1991.         /* Allocate the pages for each output buffer. */
  1992.         for (i = 0; i < drv->num_output_buffers; i++) {
  1993.         drv->output_buffers[i] = (void *)(drv->output_buffer + 
  1994.                                                   (i * drv->output_buffer_size));
  1995. drv->output_sizes[i] = 0;
  1996. drv->output_notify[i] = 0;
  1997.         }
  1999.         /* Setup the circular queue of input buffers. */
  2000.         drv->num_input_buffers = 8;
  2001. drv->input_buffer_size = (4096 * 2);
  2002. drv->recording_count = 0;
  2003.         drv->input_front = 0;
  2004.         drv->input_rear = 0;
  2005.         drv->input_count = 0;
  2006. drv->input_offset = 0;
  2007.         drv->input_size = 0;
  2008.         drv->input_active = 0;
  2009.         drv->input_buffers = kmalloc(drv->num_input_buffers * sizeof(__u8 *),
  2010.      GFP_KERNEL);
  2011.         drv->input_sizes = kmalloc(drv->num_input_buffers * 
  2012.                                    sizeof(size_t), GFP_KERNEL);
  2013.         if (!drv->input_buffers || !drv->input_sizes)
  2014.                 goto kmalloc_failed3;
  2016.         /* Allocate the pages for each input buffer. */
  2017. if (duplex == 1) {
  2018.                 drv->input_buffer = kmalloc((drv->input_buffer_size * 
  2019.                                              drv->num_input_buffers), 
  2020.                                             GFP_DMA);
  2021.                 if (!drv->input_buffer)
  2022.                         goto kmalloc_failed4;
  2024.                 for (i = 0; i < drv->num_input_buffers; i++)
  2025.                         drv->input_buffers[i] = (void *)(drv->input_buffer + 
  2026.                                                          (i * drv->input_buffer_size));
  2027. } else {
  2028.                 if (duplex == 2) {
  2029.                         drv->input_buffer = drv->output_buffer;
  2030.                         drv->input_buffer_size = drv->output_buffer_size;
  2031.                         drv->num_input_buffers = drv->num_output_buffers;
  2032.                         for (i = 0; i < drv->num_input_buffers; i++) 
  2033.                                 drv->input_buffers[i] = drv->output_buffers[i];
  2034.                 } else {
  2035.                         for (i = 0; i < drv->num_input_buffers; i++) 
  2036.                                 drv->input_buffers[i] = NULL;
  2037.                 }
  2038. }
  2040. /* Take note of our duplexity */
  2041. drv->duplex = duplex;
  2043. /* Ensure that the driver is marked as not being open. */
  2044. drv->flags = 0;
  2046. MOD_INC_USE_COUNT;
  2048. /* Take driver slot, note which we took */
  2049. drv->index = dev;
  2050. drivers[dev] = drv;
  2052. return 0;
  2054. kmalloc_failed4:
  2055. kfree(drv->input_buffer);
  2057. kmalloc_failed3:
  2058.         if (drv->input_sizes)
  2059.                 kfree(drv->input_sizes);
  2060.         if (drv->input_buffers)
  2061.                 kfree(drv->input_buffers);
  2062.         i = drv->num_output_buffers;
  2064. kmalloc_failed2:
  2065. kfree(drv->output_buffer);
  2067. kmalloc_failed1:
  2068.         if (drv->output_buffers)
  2069.                 kfree(drv->output_buffers);
  2070.         if (drv->output_sizes)
  2071.                 kfree(drv->output_sizes);
  2072.         if (drv->output_notify)
  2073.                 kfree(drv->output_notify);
  2075.         return -ENOMEM;
  2076. }
  2078. int unregister_sparcaudio_driver(struct sparcaudio_driver *drv, int duplex)
  2079. {
  2080. devfs_handle_t de;
  2081. int i;
  2082. char name_buf[32];
  2084. /* Figure out which driver is unregistering */
  2085. if (drivers[drv->index] != drv)
  2086. return -EIO;
  2088. /* Deallocate the queue of output buffers. */
  2089. kfree(drv->output_buffer);
  2090. kfree(drv->output_buffers);
  2091. kfree(drv->output_sizes);
  2092. kfree(drv->output_notify);
  2094. /* Deallocate the queue of input buffers. */
  2095. if (duplex == 1) {
  2096.                 kfree(drv->input_buffer);
  2097.                 kfree(drv->input_sizes);
  2098. }
  2099. kfree(drv->input_buffers);
  2101. if (&(drv->sd_siglist) != NULL)
  2102.                 lis_free_elist( &(drv->sd_siglist) );
  2104. /* Unregister ourselves with devfs */
  2105. for (i=0; i < sizeof (dev_list) / sizeof (*dev_list); i++) {
  2106. sparcaudio_mkname (name_buf, dev_list[i].name, drv->index);
  2107. de = devfs_find_handle (devfs_handle, name_buf, 0, 0,
  2108. DEVFS_SPECIAL_CHR, 0);
  2109. devfs_unregister (de);
  2110. }
  2112. MOD_DEC_USE_COUNT;
  2114. /* Null the appropriate driver */
  2115. drivers[drv->index] = NULL;
  2117. return 0;
  2118. }
  2120. EXPORT_SYMBOL(register_sparcaudio_driver);
  2121. EXPORT_SYMBOL(unregister_sparcaudio_driver);
  2122. EXPORT_SYMBOL(sparcaudio_output_done);
  2123. EXPORT_SYMBOL(sparcaudio_input_done);
  2125. static int __init sparcaudio_init(void)
  2126. {
  2127. /* Register our character device driver with the VFS. */
  2128. if (devfs_register_chrdev(SOUND_MAJOR, "sparcaudio", &sparcaudio_fops))
  2129. return -EIO;
  2131. devfs_handle = devfs_mk_dir (NULL, "sound", NULL);
  2132. return 0;
  2133. }
  2135. static void __exit sparcaudio_exit(void)
  2136. {
  2137. devfs_unregister_chrdev(SOUND_MAJOR, "sparcaudio");
  2138. devfs_unregister (devfs_handle);
  2139. }
  2141. module_init(sparcaudio_init);
  2142. module_exit(sparcaudio_exit);
  2143. MODULE_LICENSE("GPL");
  2145. /*
  2146.  * Code from Linux Streams, Copyright 1995 by
  2147.  * Graham Wheeler, Francisco J. Ballesteros, Denis Froschauer
  2148.  * and available under GPL 
  2149.  */
  2151. static int
  2152. lis_add_to_elist( strevent_t **list, pid_t pid, short events )
  2153. {
  2154.         strevent_t *ev = NULL;
  2156.         if (*list != NULL) {
  2157.                 for (ev = (*list)->se_next;
  2158.                      ev != *list && ev->se_pid < pid;
  2159.                      ev = ev->se_next)
  2160.                         ;
  2161.         }
  2163.         if (ev == NULL || ev == *list) {             /* no slot for pid in list */
  2164.                 ev = (strevent_t *) kmalloc(sizeof(strevent_t), GFP_KERNEL);
  2165.                 if (ev == NULL)
  2166.                         return(-ENOMEM);
  2168.                 if (!*list) {                   /* create dummy head node */
  2169.                         strevent_t *hd;
  2171.                         hd = (strevent_t *) kmalloc(sizeof(strevent_t), GFP_KERNEL);
  2172.                         if (hd == NULL) {
  2173.                                 kfree(ev);
  2174.                                 return(-ENOMEM);
  2175.                         }
  2176.                         (*list = hd)->se_pid = 0;
  2177.                         hd->se_next = hd->se_prev = hd;         /* empty list */
  2178.                 }
  2180.                 /* link node last in the list */
  2181.                 ev->se_prev = (*list)->se_prev;
  2182.                 (*list)->se_prev->se_next = ev;
  2183.                 ((*list)->se_prev = ev)->se_next = *list;
  2185.                 ev->se_pid = pid;
  2186.                 ev->se_evs = 0;
  2187.         } else if (ev->se_pid != pid) {  /* link node in the middle of the list */
  2188.                 strevent_t *new;
  2190.                 new = (strevent_t *) kmalloc(sizeof(strevent_t), GFP_KERNEL);
  2191.                 if (new == NULL)
  2192.                         return -ENOMEM;
  2194.                 new->se_prev = ev->se_prev;
  2195.                 new->se_next = ev;
  2196.                 ev->se_prev->se_next = new;
  2197.                 ev->se_prev = new;
  2198.                 ev = new;                              /* use new element */
  2199.                 ev->se_pid = pid;
  2200.                 ev->se_evs = 0;
  2201.         }
  2203.         ev->se_evs |= events;
  2204.         return 0;
  2205. }
  2207. static int
  2208. lis_del_from_elist( strevent_t **list, pid_t pid, short events )
  2209. {
  2210.         strevent_t *ev = NULL;     
  2212.         if (*list != NULL) {
  2213.                 for (ev = (*list)->se_next;
  2214.                      ev != *list && ev->se_pid < pid;
  2215.                      ev = ev->se_next)
  2216.                         ;
  2217.         }
  2219.         if (ev == NULL || ev == *list || ev->se_pid != pid)
  2220.                 return 1;
  2222.         if ((ev->se_evs &= ~events) == 0) {        /* unlink */
  2223.                 if (ev->se_next)                        /* should always be true */
  2224.                         ev->se_next->se_prev = ev->se_prev;
  2225.                 if (ev->se_prev)                        /* should always be true */
  2226.                         ev->se_prev->se_next = ev->se_next;
  2227.                 kfree(ev);
  2228.         }
  2229.         return 0;
  2230. }
  2232. static void
  2233. lis_free_elist( strevent_t **list )
  2234. {
  2235.         strevent_t  *ev;     
  2236.         strevent_t  *nxt;
  2238.         for (ev = *list; ev != NULL; ) {
  2239.                 nxt = ev->se_next;
  2240.                 kfree(ev);
  2241.                 ev = nxt;
  2242.                 if (ev == *list)
  2243.                         break;                /* all done */
  2244.         }
  2246.         *list = NULL;
  2247. }
  2249. static short
  2250. lis_get_elist_ent( strevent_t *list, pid_t pid )
  2251. {
  2252.         strevent_t *ev = NULL;
  2254.         if (list == NULL)
  2255.                 return 0;
  2257.         for(ev = list->se_next ; ev != list && ev->se_pid < pid; ev = ev->se_next)
  2258.                 ;
  2259.         if (ev != list && ev->se_pid == pid)
  2260.                 return ev->se_evs;
  2261.         else
  2262.                 return 0;
  2263. }
  2265. static void 
  2266. kill_procs( struct strevent *elist, int sig, short e)
  2267. {
  2268.         strevent_t *ev;
  2269.         int res;
  2271.         if (elist) {
  2272.                 for(ev = elist->se_next ; ev != elist; ev = ev->se_next)
  2273.                         if ((ev->se_evs & e) != 0) {
  2274.                                 res = kill_proc(ev->se_pid, SIGPOLL, 1);
  2276.                                 if (res < 0) {
  2277.                                         if (res == -3) {
  2278.                                                 lis_del_from_elist(&elist,
  2279.                                                                    ev->se_pid,
  2280.                                                                    S_ALL);
  2281.                                                 continue;
  2282.                                         }
  2283.                                         dprintk(("kill_proc: errno %dn",res));
  2284.                                 }
  2285.                         }
  2286.         }
  2287. }
  2289. /*
  2290.  * Overrides for Emacs so that we follow Linus's tabbing style.
  2291.  * Emacs will notice this stuff at the end of the file and automatically
  2292.  * adjust the settings for this buffer only.  This must remain at the end
  2293.  * of the file.
  2294.  * ---------------------------------------------------------------------------
  2295.  * Local variables:
  2296.  * c-indent-level: 4
  2297.  * c-brace-imaginary-offset: 0
  2298.  * c-brace-offset: -4
  2299.  * c-argdecl-indent: 4
  2300.  * c-label-offset: -4
  2301.  * c-continued-statement-offset: 4
  2302.  * c-continued-brace-offset: 0
  2303.  * indent-tabs-mode: nil
  2304.  * tab-width: 8
  2305.  * End:
  2306.  */