English
- #
- # wan devices configuration
- #
- mainmenu_option next_comment
- comment 'Wan interfaces'
- bool 'Wan interfaces support' CONFIG_WAN
- if [ "$CONFIG_WAN" = "y" ]; then
- # There is no way to detect a comtrol sv11 - force it modular for now.
- dep_tristate ' Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m
- # The COSA/SRP driver has not been tested as non-modular yet.
- dep_tristate ' COSA/SRP sync serial boards support' CONFIG_COSA m
- #
- # COMX drivers
- #
- tristate ' MultiGate (COMX) synchronous serial boards support' CONFIG_COMX
- if [ "$CONFIG_COMX" != "n" ]; then
- dep_tristate ' Support for COMX/CMX/HiCOMX boards' CONFIG_COMX_HW_COMX $CONFIG_COMX
- dep_tristate ' Support for LoCOMX board' CONFIG_COMX_HW_LOCOMX $CONFIG_COMX
- dep_tristate ' Support for MixCOM board' CONFIG_COMX_HW_MIXCOM $CONFIG_COMX
- dep_tristate ' Support for HDLC and syncPPP protocols on MultiGate boards' CONFIG_COMX_PROTO_PPP $CONFIG_COMX
- if [ "$CONFIG_LAPB" = "y" ]; then
- dep_tristate ' Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_COMX
- fi
- if [ "$CONFIG_LAPB" = "m" ]; then
- dep_tristate ' Support for LAPB protocol on MultiGate boards' CONFIG_COMX_PROTO_LAPB $CONFIG_LAPB
- fi
- dep_tristate ' Support for Frame Relay on MultiGate boards' CONFIG_COMX_PROTO_FR $CONFIG_COMX
- fi
- #
- # The Etinc driver has not been tested as non-modular yet.
- #
- dep_tristate ' Etinc PCISYNC serial board support (EXPERIMENTAL)' CONFIG_DSCC4 m
- # FarSite Communications' cards
- tristate ' FarSync T-Series X.21 (and V.35/V.24) cards' CONFIG_FARSYNC
- #
- # Lan Media's board. Currently 1000, 1200, 5200, 5245
- #
- tristate ' LanMedia Corp. SSI/V.35, T1/E1, HSSI, T3 boards' CONFIG_LANMEDIA
- # There is no way to detect a Sealevel board. Force it modular
- dep_tristate ' Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m
- tristate ' SyncLink HDLC/SYNCPPP support' CONFIG_SYNCLINK_SYNCPPP
- tristate ' Generic HDLC driver' CONFIG_HDLC
- if [ "$CONFIG_HDLC" != "n" ]; then
- bool ' Synchronous Point-to-Point Protocol (PPP) support' CONFIG_HDLC_PPP
- if [ "$CONFIG_LAPB" = "m" -a "$CONFIG_HDLC" = "m" -o "$CONFIG_LAPB" = "y" ]; then
- bool ' X.25 protocol support' CONFIG_HDLC_X25
- else
- comment ' X.25/LAPB support is disabled'
- fi
- dep_tristate ' SDL RISCom/N2 support' CONFIG_N2 $CONFIG_HDLC
- dep_tristate ' Moxa C101 support' CONFIG_C101 $CONFIG_HDLC
- fi
- tristate ' Frame relay DLCI support' CONFIG_DLCI
- if [ "$CONFIG_DLCI" != "n" ]; then
- int ' Max open DLCI' CONFIG_DLCI_COUNT 24
- int ' Max DLCI per device' CONFIG_DLCI_MAX 8
- dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI
- fi
- # Wan router core.
- if [ "$CONFIG_WAN_ROUTER" != "n" ]; then
- bool ' WAN router drivers' CONFIG_WAN_ROUTER_DRIVERS
- if [ "$CONFIG_WAN_ROUTER_DRIVERS" = "y" ]; then
- dep_tristate ' Sangoma WANPIPE(tm) multiprotocol cards' CONFIG_VENDOR_SANGOMA $CONFIG_WAN_ROUTER
- if [ "$CONFIG_VENDOR_SANGOMA" != "n" ]; then
- bool ' WANPIPE Cisco HDLC support' CONFIG_WANPIPE_CHDLC
- bool ' WANPIPE Frame Relay support' CONFIG_WANPIPE_FR
- bool ' WANPIPE X.25 support' CONFIG_WANPIPE_X25
- bool ' WANPIPE PPP support' CONFIG_WANPIPE_PPP
- bool ' WANPIPE Multi-Port PPP support' CONFIG_WANPIPE_MULTPPP
- fi
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' Cyclom 2X(tm) cards (EXPERIMENTAL)' CONFIG_CYCLADES_SYNC $CONFIG_WAN_ROUTER_DRIVERS
- if [ "$CONFIG_CYCLADES_SYNC" != "n" ]; then
- bool ' Cyclom 2X X.25 support' CONFIG_CYCLOMX_X25
- fi
- fi
- fi
- fi
- # X.25 network drivers
- if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
- dep_tristate ' LAPB over Ethernet driver (EXPERIMENTAL)' CONFIG_LAPBETHER $CONFIG_LAPB $CONFIG_X25
- dep_tristate ' X.25 async driver (EXPERIMENTAL)' CONFIG_X25_ASY $CONFIG_LAPB $CONFIG_X25
- fi
- if [ "$CONFIG_X86" = "y" ]; then
- tristate ' Granch SBNI12 Leased Line adapter support' CONFIG_SBNI
- if [ "$CONFIG_SBNI" != "n" ]; then
- bool ' Multiple line feature support' CONFIG_SBNI_MULTILINE
- fi
- fi
- fi
- endmenu
