if_arcnet.h
上传用户:jlfgdled
上传日期:2013-04-10
资源大小:33168k
文件大小:3k
源码类别:

Linux/Unix编程

开发平台:

Unix_Linux

  1. /*
  2.  * INET         An implementation of the TCP/IP protocol suite for the LINUX
  3.  *              operating system.  INET is implemented using the  BSD Socket
  4.  *              interface as the means of communication with the user level.
  5.  *
  6.  *              Global definitions for the ARCnet interface.
  7.  *
  8.  * Authors:     David Woodhouse and Avery Pennarun
  9.  *
  10.  *              This program is free software; you can redistribute it and/or
  11.  *              modify it under the terms of the GNU General Public License
  12.  *              as published by the Free Software Foundation; either version
  13.  *              2 of the License, or (at your option) any later version.
  14.  */
  15. #ifndef _LINUX_IF_ARCNET_H
  16. #define _LINUX_IF_ARCNET_H
  17. #include <linux/if_ether.h>
  18. /*
  19.  *    These are the defined ARCnet Protocol ID's.
  20.  */
  21. /* RFC1201 Protocol ID's */
  22. #define ARC_P_IP 212 /* 0xD4 */
  23. #define ARC_P_ARP 213 /* 0xD5 */
  24. #define ARC_P_RARP 214 /* 0xD6 */
  25. #define ARC_P_IPX 250 /* 0xFA */
  26. #define ARC_P_NOVELL_EC 236 /* 0xEC */
  27. /* Old RFC1051 Protocol ID's */
  28. #define ARC_P_IP_RFC1051 240 /* 0xF0 */
  29. #define ARC_P_ARP_RFC1051 241 /* 0xF1 */
  30. /* MS LanMan/WfWg "NDIS" encapsulation */
  31. #define ARC_P_ETHER 232 /* 0xE8 */
  32. /* Unsupported/indirectly supported protocols */
  33. #define ARC_P_DATAPOINT_BOOT 0 /* very old Datapoint equipment */
  34. #define ARC_P_DATAPOINT_MOUNT 1
  35. #define ARC_P_POWERLAN_BEACON 8 /* Probably ATA-Netbios related */
  36. #define ARC_P_POWERLAN_BEACON2 243 /* 0xF3 */
  37. #define ARC_P_LANSOFT 251 /* 0xFB - what is this? */
  38. #define ARC_P_ATALK 0xDD
  39. /*
  40.  * The RFC1201-specific components of an arcnet packet header.
  41.  */
  42. struct arc_rfc1201
  43. {
  44.     uint8_t  proto; /* protocol ID field - varies */
  45.     uint8_t  split_flag; /* for use with split packets */
  46.     uint16_t sequence; /* sequence number */
  47.     uint8_t  payload[0]; /* space remaining in packet (504 bytes)*/
  48. };
  49. #define RFC1201_HDR_SIZE 4
  50. /*
  51.  * The RFC1051-specific components.
  52.  */
  53. struct arc_rfc1051
  54. {
  55.     uint8_t proto; /* ARC_P_RFC1051_ARP/RFC1051_IP */
  56.     uint8_t payload[0]; /* 507 bytes */
  57. };
  58. #define RFC1051_HDR_SIZE 1
  59. /*
  60.  * The ethernet-encap-specific components.  We have a real ethernet header
  61.  * and some data.
  62.  */
  63. struct arc_eth_encap
  64. {
  65.     uint8_t proto; /* Always ARC_P_ETHER */
  66.     struct ethhdr eth; /* standard ethernet header (yuck!) */
  67.     uint8_t payload[0]; /* 493 bytes */
  68. };
  69. #define ETH_ENCAP_HDR_SIZE 14
  70. /*
  71.  * The data needed by the actual arcnet hardware.
  72.  *
  73.  * Now, in the real arcnet hardware, the third and fourth bytes are the
  74.  * 'offset' specification instead of the length, and the soft data is at
  75.  * the _end_ of the 512-byte buffer.  We hide this complexity inside the
  76.  * driver.
  77.  */
  78. struct arc_hardware
  79. {
  80.     uint8_t  source, /* source ARCnet - filled in automagically */
  81.              dest, /* destination ARCnet - 0 for broadcast    */
  82.           offset[2]; /* offset bytes (some weird semantics)     */
  83. };
  84. #define ARC_HDR_SIZE 4
  85. /*
  86.  * This is an ARCnet frame header, as seen by the kernel (and userspace,
  87.  * when you do a raw packet capture).
  88.  */
  89. struct archdr
  90. {
  91.     /* hardware requirements */
  92.     struct arc_hardware hard;
  93.      
  94.     /* arcnet encapsulation-specific bits */
  95.     union {
  96. struct arc_rfc1201   rfc1201;
  97. struct arc_rfc1051   rfc1051;
  98. struct arc_eth_encap eth_encap;
  99. uint8_t raw[0]; /* 508 bytes */
  100.     } soft;
  101. };
  102. #endif /* _LINUX_IF_ARCNET_H */