-
-
-
expchmb.zip
... driver based
on 74HC(T)125 buffer with tri-state outputs and RS-232 programming interface
based on MAX232A or MAX202 driver. Please note that you do not need to
populate the RS-232 interface in case you have some other means of programming
the micro ...
-
MSP430FR57xx_uscia0_spi_10.zip
Description: SPI slave talks to SPI master using 3-wire mode. Data received
from master is echoed back.
ACLK = 32.768kHz, MCLK = SMCLK = DCO ~ 1MHz
Note: Ensure slave is powered up before master to prevent delays due to
slave init.
-
modified_sinr.rar
... by a user over the forward link in such a high data rate system contains interference from the neighboring base stations. we note that the strength of this interference is a function of the network load in the neighboring cells. we obtain an expression ...
-
modified_sinr_cal.rar
... by a user over the forward link in such a high data rate system contains interference from the neighboring base stations. we note that the strength of this interference is a function of the network load in the neighboring cells. we obtain an expression ...
-
-
-
-
-
TCPEcho.zip
... later examples), port 1234 has been chosen for the
service, but it could just as well have been any integer in the range 1024-65535.
Note that the lines of code corresponding to each of the above steps have been
clearly marked with emboldened comments.
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
