English
资源说明：Open Source for P3GO
Open source project for P3GO supported by G-TEAM The core of P3GO MCU is MIPS, so you need a cross compiler toolchain for your host system. You can download it from the link as blow. When you decompress compiler tools, you also need to add the installed path to your environment settings, like "export PATH=$PATH:~mips_compile/bin". Cygwin on Windows: ftp://ftp.ingenic.cn/3sw/02rtos/00toolchain/mipsel-gcc4.1-cygwin-nopic.tar.bz2 Linux: ftp://ftp.ingenic.cn/3sw/02rtos/00toolchain/mipsel-4.1.2-nopic.tar.bz2 Directory structure inc -- common include directory miniclib -- small c library mtv_50 -- main project directory, there has already some payload projects, like hermes,kakroto,asbestos release -- compile binary directory soc_src -- some driver and system boot code src -- ucos and mips header files How to compile? There is some example project in the mtv_50 directory; you can try to compile these by yourselves. mtv_50/loader -- Hermers V4B payload mtv_50/loaderPL3 -- KaKaroto PL3 payload mtv_50/asbestos -- WIP:porting asbestos loader You can enter mtv_50/loader and "make build", then will generate homebrew.bin and update.bin in release directory if there is no error occured. How to update your P3GO? First you need update your P3GO to development version (please go to www.gamebox.hk to download a development version update binary), then you can put you compiled update.bin to P3GO buildin disk not TF card disk, then re-plug your device to complete update. Note if you want to your custom firmware work, you must insert a TF card in the P3GO TF slot. How to import a new project? Simply you just only copy a loader or loaderPL3 project to a new directory, then import other open source project to the new project. Note by default, your code size is limited 512KB, if you want to use more memory, please referense "How to modify memory space". How to modify memory space By default, used memory address space range of your program is 0x80300000 - 0x807FFFFF. The P3GO buildin loader program will load your code to 0x80300000 when booting, and then jump in and run it. So in demo project, such as loader and loaderPL3, default code size is limited to 512KB by link.xn, i.e. your code address range is 0x80300000 - 0x80380000, and memory space above 0x80380000 is used as heap of ucos. In the Configrure.mak file, we also defined some macro to define several memory space size. DRVMEMADDR := 0x80380000 this is heap space for driver and os. you can call alloc/dealloc function to get a heap memory space in this memory space. DRVMEMLEN := 0x40000 driver heap size APPMEMADDR := 0x803C0000 this is module heap space for application. Demo project not use that space, but you can use it feel free. So if you want to modify memory space setting, you need to change 2 files, link.xn and Configure.mak. In link.xn, you need to assign memory size for your program, and also need change the DRVMEMADDR setting in Configure.mak. Please careful, DRVMEMADDR must greater than your code size + 0x80300000. Example setup steps on cygwin step1: Download and install cygwin to c:\cygwin on your pc, specialy you must selected and installed the development packet. step2: Download the mipsel-gcc4.1-cygwin-nopic.tar.bz2 from above link and extract to c:\cygwin\opt, and then "mipseltools-nopic" directory will be created in c:\cygwin\opt. #cd /opt #bzip2 -d mipsel-gcc4.1-cygwin-nopic.tar.bz2 #tar xf mipsel-gcc4.1-cygwin-nopic.tar step3: edit C:\cygwin\home\Administrator\.bashrc and add "export PATH=/opt/mipseltools-nopic/bin:$PATH" to last of the bashrc file. step4: restart cygwin and enter your open-p3go directory and #cd mtv_50/loader #make clean #make build then if no error occur, you will get a homebrew.bin and update.bin in open-p3go/release.
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
