solarisvoip-asterisk-nconference - 源码 - 源码 - 免费下载

solarisvoip-asterisk-nconference

文件大小： unknow

源码售价： 5 个金币积分规则积分充值

资源说明：

*************************************************************************

NConference is a channel independent conference 

It is distributed under GPL V2.

It was written by Massimo "CtRiX" Cetra - 
Navynet SRL - Firenze, Italy - http://www.navynet.it

Inspiration was taken from app_conference and some (small)
parts of the code were re-used.

*************************************************************************

Ported to SolarisVoip.com by Joseph Benden 

Financial support for porting provided by Digilink, Inc.

Digilink has provided quality service for over 12 years with a 
demonstrated rock solid up time of 99.995%. We give the highest 
level of service at the lowest price.

http://www.digilink.net/

*************************************************************************

 ********************
  BUILD INSTRUCTIONS
 ********************

Ensure that /usr/sfw/bin and /usr/ccs/bin are in your PATH variables.

Place the source code below Asterisk's build directory, in the same way
that the Asterisk-Addon is built.  Your directory structure should look
like:

  ./asterisk
  ./nconference

Then,

  cd nconference
  gmake
  gmake install


 ********************
  CHANNEL VARIABLES
 ********************

  Nconference accepts 3 channel variables which, if present (like in
the following example) will set the outbound features of the application.
All of them are optional.

exten => 1234,1,Answer
; Then context where outbound calls will take place
exten => 1234,n,Set(NCONF_OUTBOUND_CONTEXT=internal)
; The default option parameters for the called member
exten => 1234,n,Set(NCONF_OUTBOUND_PARAMS=S)
; The default timeout before giving up the call
exten => 1234,n,Set(NCONF_OUTBOUND_TIMEOUT=5)
; Caller id Name and Num
exten => 1234,n,Set(NCONF_OUTBOUND_CID_NAME=Nconf)
exten => 1234,n,Set(NCONF_OUTBOUND_CID_NUM=9999)
; Here we are ! :-)
exten => 1234,n,NConference(12345/MV/1111)

NCONF_OUTBOUND_CONTEXT: The context where to put the outgoing call to.

NCONF_OUTBOUND_PARAMS : Parameters to invoke the conference application
			in the outbound channel.

NCONF_OUTBOUND_TIMEOUT (seconds) : The timeout before hangup, if no answer.


 ********************
  KEYBOARD FUNCTIONS
 ********************

     Normal mode
 (all type of users)
     -----------

    +---+---+---+
    | 1 | 2 | 3 |
    +---+---+---+
    | 4 | 5 | 6 |
    +---+---+---+
    | 7 | 8 | 9 |
    +---+---+---+
    | * | 0 | # |
    +---+---+---+

1 - Talk volume DOWN
2 - Hold this channel - Talk Mute and switch on MOH (on/off)
3 - Talk volume UP
4 - VAD On/Off if support is compiled in
5 - Talk Mute ON/OFF
6 - Enable/Disable sounds for this member (override conference main settings)
    (a beep is played when sounds are enabled)
7 - 
8 -
9 - Asks for pin to become a moderator member (terminated by #)
0 - Says the number of the members in the conference 
* - Enable admin mode (if the member is a Moderator, otherwise do nothing)
# - Hangup 


 ********************
  KEYBOARD FUNCTIONS
 ********************

     Admin mode
  (Moderators only)
     ----------

    +---+---+---+
    | 1 | 2 | 3 |
    +---+---+---+
    | 4 | 5 | 6 |
    +---+---+---+
    | 7 | 8 | 9 |
    +---+---+---+
    | * | 0 | # |
    +---+---+---+

1 - Considers the following digits (up to #) as an extension 
    to be called and added to the conference.
    The extension is looked up in the same context of the 
    conference and is started for a SPEAKER vith VAD (if compiled in) 
    and DTMF tones commands activated.

2 - 
3 - 

4 - Enable/Disable sounds for ALL members of the conference.
 0- Disable
 1 Enable

5 - Mute/Unmute all members except the one who has typed the command
 0- Unmute
 1- Mute

6 - Start/Stop playing MOH for all members of the conference.
 0- Stop
 1- Start

7 - Lock/Unlock the conference (No one will be able to join unless it's moderator)
 0- Unlock
 1- Lock

8 -

9 - Sets the following digits (up to #) as the conference PIN.
    Plays the PIN when set.
    (Throws manager event)

0 - Hangup 
 0- Quit gracefully all users except the member entering the command
 1- Kicks last user entered
 2- Kicks all users except the member entering the command
* - Exits admin mode
# - (for some commands) Command is over: execute it



 ********************
    MANAGER EVENTS
 ********************

Manager events are generated on:
 * DTMF Received
 * Speaking state change detected
 * Setting the PIN of a conference
 * Joins/Leave events
 * Conference Creation/Deletion

部分文件列表（点击文件名可查看文件内容）

					
									本源码包内暂不包含可直接显示的源代码文件，请下载源码包。