English
资源说明：LPC11U1x/LPC1343 Cortex M0/M3 Microcontroller Breakout Board
USBug Development Board ===== The USBug is a complete USB-based microcontroller development system in a very small footprint. All programming is done via the USB port. No special programmer is needed, only a standard "Mini-B" USB cable and a Windows/Linux PC or a Macintosh with a USB port are required. Key features: - Fully Open-Source Hardware & Software (CC-BY-SA, GPL) - Drag & Drop firmware, just use it as an USB Memory Stick! - No Loader application, the bootloader resides in ROM (unereasable) - Works with Mac OS X, Linux & Windows - Standard ARM SWD debug/trace connector - ARM "Cortex M3" 32-bit processor, up to 72 MHz, up to 64 kB Flash, up to 10 kB SRAM - Up to 42 GPIO pins, 1xUSB device, 1xUART, 1xI2C, 1xSPI interfaces - 2x32-bit, 2x16-bit, 1xWatchdog timers - 10 Bit ADC with up to 8 inputs - Tiny size: 2" x 0.8" (50 mm x 20 mm), only 0.244" (6.2 mm) thick (w/o header pins) - Available with pins for solderless breadboard - Very low cost & low shipping options
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
