English
资源说明：LPC1343 Developement board
CatNip - LPC1343 Developement board ====== This is a derivative work of microbuilderÕs LPC1343 Reference Design http://www.microbuilder.eu/projects/LPC1343ReferenceDesign/ The design is aimed at creating a platform that enables to create USB enabled devices quickly and efficiently. The board is optimised for creating devices which will be contained within a case. The main differences from microbuilderÕs design: - USB connection header is added in order to facilitate adding an external case - mounted USB connector that is placed far away from the board - RESET pin is in a breakout in order to allow putting a reset button on the device case. - power is connected via screw terminals - eeprom in SO8 package is used as itÕs more common - separate power header is added to export regulated and incomming voltages to daughter boards - most of 3.3V and GND connections removed from breakout as it encourages ground loops, GND connections are left near communication pins (SPI, I2C, RXTX) for easier prototyping, 3.3V connection is left near ADC inputs as itÕs handy to limit ADC input to 3.3V by adding a diode - All UART pins except RX and TX are reclaimed (who uses UART anyway?:) - More ADC pins added - LED pin is added to header - JTAG connector removed and itÕs pins reclaimed for GPIO/ADC
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
