English
资源说明：Fixing the lack of a DTR pin on the Raspberry Pi for the purposes of uploading hex files to the arduino
Using avrdude with the Raspberry Pi
===================================
Since the Raspberry Pi lacks a DTR pin that makes it oh-so-easy to upload your hex files into
the avr, we need this hack to make it just as easy. When you wire up your atmega chip, be sure
to connect one of the digital gpio pins to the reset pin, and then you'll be able to use avrdude
as if your serial cable actually had a dtr pin.
Instructions:
-------------
Copy both files into your /usr/bin directory, then rename the original avrdude to avrdude-original
and symlink avrdude-autoreset to become avrdude.
cp autoreset /usr/bin
cp avrdude-autoreset /usr/bin
mv /usr/bin/avrdude /usr/bin/avrdude-original
ln -s /usr/bin/avrdude-autoreset /usr/bin/avrdude
Modify the autoreset script to use the pin that you wired up to the reset pin. See the line in
autoreset where we do "pin = 11" and change the 11 to your gpio pin number.
Now when you run avrdude from anywhere (including via arduino's normal UI) it will flag dtr when
it is about to upload hex data.
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
