English
资源说明：packages for openwrt to work with BM1707 device (yet another 1-wire sensor)
# Once upon a time... There was a DALLAS 1-wire sensor. Many devices used to deal with it. So **BM1707 (MP707)** also did. This is a small USB device that has one sensor on board and ability to connect much more by wire. Also it has ability to control external relay by temperature changes. More information on device available at http://olimp-z.ru/mp707 and http://www.masterkit.ru/main/set.php?code_id=565375 **So what is it all about** This repo contains files to use with OpenWRT SDK. Current version uses libstdc++ and libusb. **Step by step guide** 1. Run a linux machine.
Let's say it would be Ubuntu on virtualbox. Make sure you have enough disk space on virtual machine to store SDK. 2. Download proper SDK from OpenWRT.org (release, hardware). If you're not sure what release/hw to use check supported devices list at http://wiki.openwrt.org/toh/start. Follwing example will download SDK for `attitude_adjustment` realease 12.09 `ar71xx` platform. `wget http://downloads.openwrt.org/attitude_adjustment/12.09/ar71xx/generic/OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2.tar.bz2` 3. Decompress SDK. `tar xjvf OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2.tar.bz2` 4. Download `bmtemp` package contents `wget https://github.com/bubbafix/openwrt-bm1707/archive/master.zip` 5. Decompress archive `unzip ./master.zip` 6. Copy package contents into proper folder. `cp ./openwrt-bm1707-master/package/* ./OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2/package/` 7. Go into SDK folder. `cd /OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2/` 8. Compile package `make` 9. If everything went well find these files: `bmtemp_2_ar71xx.ipk Packages Packages.gz` at `ls ./OpenWrt-SDK-ar71xx-for-linux-i486-gcc-4.6-linaro_uClibc-0.9.33.2/bin/ar71xx/packages/` 10. File `.ipk` is ready to be installed with `opkg install ...` command. **Important Notice** There can be hardware limitations for USB on some routers so it won't work without external USB hub. E.g. for TL-MR3020: https://dev.openwrt.org/ticket/11985 ## Thanks to... * Maxim Integrated @ http://www.maximintegrated.com/ for beautiful solution * People from www.masterkit.ru for BM1707 device. * Initial code samples @ http://usbsergdev.narod.ru and http://olimp-z.ru/mp707 * All contributors for OpenWrt @ https://openwrt.org * Public monitoring project @ http://narodmon.ru * People who tried to use this package for their feedback
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
