English
资源说明：----------------------------------------------------------------
Canon Digital Camera SDK README file
Version 7.3.0
July 2005
Windows edition
----------------------------------------------------------------
Copyright (c)1997-2005 Canon Inc.
________________________________________________________________
Thank you for developing software for Canon digital cameras.
This README file contains some information which may be helpful
in diagnosing problems with the Canon Digital Camera SDK or
Canon digital cameras.
________________________________________________________________
--------
CONTENTS
--------
1. Supported Cameras
2. Windows 2000/XP Specific Notes
3. Windows 98SE/Me/2000/XP Specific Notes
4. Installing the Canon Digital Camera SDK
5. Un-Installing the Canon Digital Camera SDK
6. Caution relating to Remote Release Control Function
7. RAW Developmet Function
1. Supported Cameras
================================================================
This version of the Canon Digital Camera SDK supports the
cameras shown below.
PowerShot A10, PowerShot A20, PowerShot A30, PowerShot A40,
PowerShot A60, PowerShot A70, PowerShot A75, PowerShot A80,
PowerShot A85, PowerShot A95
PowerShot A100, PowerShot A200, PowerShot A300, PowerShot A310,
PowerShot A400, PowerShot A510, PowerShot A520
PowerShot S10, PowerShot S20, PowerShot S30, PowerShot S40,
PowerShot S45, PowerShot S50, PowerShot S60, PowerShot S70
PowerShot S100, IXY DIGITAL, DIGITAL IXUS,
PowerShot S110, IXY DIGITAL 200, DIGITAL IXUS v,
PowerShot S200, IXY DIGITAL 200a, DIGITAL IXUS v2,
PowerShot S230, IXY DIGITAL 320, DIGITAL IXUS v3,
PowerShot S300, IXY DIGITAL 300, DIGITAL IXUS 300,
PowerShot S330, IXY DIGITAL 300a, DIGITAL IXUS 330,
PowerShot S400, IXY DIGITAL 400, DIGITAL IXUS 400,
PowerShot SD100, IXY DIGITAL 30, DIGITAL IXUS II,
PowerShot SD10, IXY DIGITAL L, DIGITAL IXUS i,
PowerShot SD110, IXY DIGITAL 30a, DIGITAL IXUS IIs,
PowerShot S410, IXY DIGITAL 450, DIGITAL IXUS 430,
PowerShot S500, IXY DIGITAL 500, DIGITAL IXUS 500,
PowerShot SD20, IXY DIGITAL L2, DIGITAL IXUS I5,
PowerShot SD200, IXY DIGITAL 40, DIGITAL IXUS 30,
PowerShot SD300, IXY DIGITAL 50, DIGITAL IXUS 40,
PowerShot SD400, IXY DIGITAL 55, DIGITAL IXUS 50,
PowerShot SD500, IXY DIGITAL 600, DIGITAL IXUS 700
PowerShot G1, PowerShot G2, PowerShot G3, PowerShot G5,
PowerShot G6,
PowerShot Pro90 IS,
PowerShot S1 IS, PowerShot Pro1
The EOS class of digital cameras are not supported.
2. Windows 2000/XP Specific Notes
================================================================
(1) NTFS (NT File System) not supported on memory card
installed in camera. Memory card must be formatted with the
FAT File System before camera will recognize it.
(2) Removing a memory card from the card reader when system is
running results in system lockup. Be sure that Windows is
completely shut down before removing or inserting a memory
card.
(3) Not all Memory Card Readers have Windows 2000/XP
support. Check with your PC Card vendor for details.
3. Windows 98SE/Me/2000/XP Specific Notes
================================================================
(1) Cautions relating to USB connection
Please do not place your computer into standby mode while
the Canon digital camera is connected to its USB port. If
the computer is placed into standby mode while the camera
is connected to the USB port, do NOT disconnect the USB
cable from the camera or computer. Try to revive the
computer. Instead, restore the computer to normal operation
mode with the cable still connected.
Unplugging the cable with the computer in standby mode may
cause some computers to not recover correctly from standby
mode. For details on standby mode, refer to your computer's
manual.
(2) Cautions relating to communication between the SDK and a
Canon digital camera
When the SDK is running and is connected to a camera, the
driver makes communications with the camera periodically.
Do not operate the camera controls, remove the memory card
or battery, disconnect the communication cable, or otherwise
interfere with the communications.
Such actions may cause misoperation on some PCs.
Wait until the driver has shut down before doing such
actions.
4. Installing the Canon Digital Camera SDK
================================================================
To start the installation program, double-click on the SETUP.EXE
program on the first installation disk. The program will prompt
you for further actions.
Once you have started the Installation program, remove an
installation diskette from your diskette drive only under the
following circumstances:
(1) The Canon Digital Camera SDK installation program prompts
you to do so.
(2) You have completed the installation successfully.
(3) You have Canceled out of the Installation program
(pressed "Cancel" button) before successful completion.
5. Un-Installing the Canon Digital Camera SDK
================================================================
To uninstall Canon Digital Camera SDK, please carry out the
following procedure:
(1) Click the Start button, point to Settings, and then click
Control Panel.
(2) Double-click the "Add/Remove Programs" icon.
(3) On the Install/Uninstall tab, click "Canon Digital Camera
SDK 7.1", and then click the "Add/Remove..." button.
(4) The uninstaller may ask you about removing shared files.
Click on "Yes" to remove the specified file, or click
on "Yes To All" to simply remove all of these files.
6. Caution relating to Remote Release Control Function
================================================================
The processing of CDRelease() and CDGetReleasedData() cannot be
canceled.
Therefore, never return cdOPERATION_CANCELLED in the callback
function specified by pCallbackFunc parameter.
7. RAW Developmet Function
================================================================
CD-SDK 7 and later do not support the RAW development function.
To use the development function for RAW data captured using
a PowerShot digital camera, use the RD-SDK(RAW Development SDK).
本源码包内暂不包含可直接显示的源代码文件，请下载源码包。
