操作系统开发

开发平台：

WINDOWS

COMPLETE.T：源码内容

25109 /*==========================================================================*
25110 * lock_ready *
25111 *==========================================================================*/
25112 PUBLIC void lock_ready(rp)
25113 struct proc *rp; /* this process is now runnable */
25114 {
.Ep 344 src/kernel/proc.c
25115 /* Safe gateway to ready() for tasks. */
25116
25117 switching = TRUE;
25118 ready(rp);
25119 switching = FALSE;
25120 }
25122 /*==========================================================================*
25123 * lock_unready *
25124 *==========================================================================*/
25125 PUBLIC void lock_unready(rp)
25126 struct proc *rp; /* this process is no longer runnable */
25127 {
25128 /* Safe gateway to unready() for tasks. */
25129
25130 switching = TRUE;
25131 unready(rp);
25132 switching = FALSE;
25133 }
25135 /*==========================================================================*
25136 * lock_sched *
25137 *==========================================================================*/
25138 PUBLIC void lock_sched()
25139 {
25140 /* Safe gateway to sched() for tasks. */
25141
25142 switching = TRUE;
25143 sched();
25144 switching = FALSE;
25145 }
25147 /*==========================================================================*
25148 * unhold *
25149 *==========================================================================*/
25150 PUBLIC void unhold()
25151 {
25152 /* Flush any held-up interrupts. k_reenter must be 0. held_head must not
25153 * be NIL_PROC. Interrupts must be disabled. They will be enabled but will
25154 * be disabled when this returns.
25155 */
25156
25157 register struct proc *rp; /* current head of held queue */
25158
25159 if (switching) return;
25160 rp = held_head;
25161 do {
25162 if ( (held_head = rp->p_nextheld) == NIL_PROC) held_tail = NIL_PROC;
25163 rp->p_int_held = FALSE;
25164 unlock(); /* reduce latency; held queue may change! */
25165 interrupt(proc_number(rp));
25166 lock(); /* protect the held queue again */
25167 }
25168 while ( (rp = held_head) != NIL_PROC);
25169 }
25171 #if (CHIP == M68000)
25172 /*==========================================================================*
25173 * cp_mess *
25174 *==========================================================================*/
.Op 345 src/kernel/proc.c
25175 PRIVATE void cp_mess(src, src_p, src_m, dst_p, dst_m)
25176 int src; /* sender process */
25177 register struct proc *src_p; /* source proc entry */
25178 message *src_m; /* source message */
25179 register struct proc *dst_p; /* destination proc entry */
25180 message *dst_m; /* destination buffer */
25181 {
25182 #if (SHADOWING == 0)
25183 /* convert virtual address to physical address */
25184 /* The caller has already checked if all addresses are within bounds */
25185
25186 src_m = (message *)((char *)src_m + (((phys_bytes)src_p->p_map[D].mem_phys
25187 - src_p->p_map[D].mem_vir) << CLICK_SHIFT));
25188 dst_m = (message *)((char *)dst_m + (((phys_bytes)dst_p->p_map[D].mem_phys
25189 - dst_p->p_map[D].mem_vir) << CLICK_SHIFT));
25190 #else
25191 register phys_bytes correction;
25192
25193 if (correction = src_p->p_shadow) {
25194 correction = (correction - src_p->p_map[D].mem_phys) << CLICK_SHIFT;
25195 src_m = (message *)((char *)src_m + correction);
25196 }
25197 if (correction = dst_p->p_shadow) {
25198 correction = (correction - dst_p->p_map[D].mem_phys) << CLICK_SHIFT;
25199 dst_m = (message *)((char *)dst_m + correction);
25200 }
25201 #endif
25202 #ifdef NEEDFSTRUCOPY
25203 phys_copy(src_m,dst_m,(phys_bytes) sizeof(message));
25204 #else
25205 *dst_m = *src_m;
25206 #endif
25207 dst_m->m_source = src;
25208 }
25209 #endif
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
src/kernel/protect.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
25300 /* This file contains code for initialization of protected mode, to initialize
25301 * code and data segment descriptors, and to initialize global descriptors
25302 * for local descriptors in the process table.
25303 */
25304
25305 #include "kernel.h"
25306 #include "proc.h"
25307 #include "protect.h"
25308
25309 #if _WORD_SIZE == 4
25310 #define INT_GATE_TYPE (INT_286_GATE | DESC_386_BIT)
25311 #define TSS_TYPE (AVL_286_TSS | DESC_386_BIT)
25312 #else
25313 #define INT_GATE_TYPE INT_286_GATE
25314 #define TSS_TYPE AVL_286_TSS
.Ep 346 src/kernel/protect.c
25315 #endif
25316
25317 struct desctableptr_s {
25318 char limit[sizeof(u16_t)];
25319 char base[sizeof(u32_t)]; /* really u24_t + pad for 286 */
25320 };
25321
25322 struct gatedesc_s {
25323 u16_t offset_low;
25324 u16_t selector;
25325 u8_t pad; /* |000|XXXXX| ig & trpg, |XXXXXXXX| task g */
25326 u8_t p_dpl_type; /* |P|DL|0|TYPE| */
25327 #if _WORD_SIZE == 4
25328 u16_t offset_high;
25329 #else
25330 u16_t reserved;
25331 #endif
25332 };
25333
25334 struct tss_s {
25335 reg_t backlink;
25336 reg_t sp0; /* stack pointer to use during interrupt */
25337 reg_t ss0; /* " segment " " " " */
25338 reg_t sp1;
25339 reg_t ss1;
25340 reg_t sp2;
25341 reg_t ss2;
25342 #if _WORD_SIZE == 4
25343 reg_t cr3;
25344 #endif
25345 reg_t ip;
25346 reg_t flags;
25347 reg_t ax;
25348 reg_t cx;
25349 reg_t dx;
25350 reg_t bx;
25351 reg_t sp;
25352 reg_t bp;
25353 reg_t si;
25354 reg_t di;
25355 reg_t es;
25356 reg_t cs;
25357 reg_t ss;
25358 reg_t ds;
25359 #if _WORD_SIZE == 4
25360 reg_t fs;
25361 reg_t gs;
25362 #endif
25363 reg_t ldt;
25364 #if _WORD_SIZE == 4
25365 u16_t trap;
25366 u16_t iobase;
25367 /* u8_t iomap[0]; */
25368 #endif
25369 };
25370
25371 PUBLIC struct segdesc_s gdt[GDT_SIZE];
25372 PRIVATE struct gatedesc_s idt[IDT_SIZE]; /* zero-init so none present */
25373 PUBLIC struct tss_s tss; /* zero init */
25374
.Op 347 src/kernel/protect.c
25375 FORWARD _PROTOTYPE( void int_gate, (unsigned vec_nr, phys_bytes base,
25376 unsigned dpl_type) );
25377 FORWARD _PROTOTYPE( void sdesc, (struct segdesc_s *segdp, phys_bytes base,
25378 phys_bytes size) );
25379
25380 /*=========================================================================*
25381 * prot_init *
25382 *=========================================================================*/
25383 PUBLIC void prot_init()
25384 {
25385 /* Set up tables for protected mode.
25386 * All GDT slots are allocated at compile time.
25387 */
25388
25389 phys_bytes code_bytes;
25390 phys_bytes data_bytes;
25391 struct gate_table_s *gtp;
25392 struct desctableptr_s *dtp;
25393 unsigned ldt_selector;
25394 register struct proc *rp;
25395
25396 static struct gate_table_s {
25397 _PROTOTYPE( void (*gate), (void) );
25398 unsigned char vec_nr;
25399 unsigned char privilege;
25400 }
25401 gate_table[] = {
25402 divide_error, DIVIDE_VECTOR, INTR_PRIVILEGE,
25403 single_step_exception, DEBUG_VECTOR, INTR_PRIVILEGE,
25404 nmi, NMI_VECTOR, INTR_PRIVILEGE,
25405 breakpoint_exception, BREAKPOINT_VECTOR, USER_PRIVILEGE,
25406 overflow, OVERFLOW_VECTOR, USER_PRIVILEGE,
25407 bounds_check, BOUNDS_VECTOR, INTR_PRIVILEGE,
25408 inval_opcode, INVAL_OP_VECTOR, INTR_PRIVILEGE,
25409 copr_not_available, COPROC_NOT_VECTOR, INTR_PRIVILEGE,
25410 double_fault, DOUBLE_FAULT_VECTOR, INTR_PRIVILEGE,
25411 copr_seg_overrun, COPROC_SEG_VECTOR, INTR_PRIVILEGE,
25412 inval_tss, INVAL_TSS_VECTOR, INTR_PRIVILEGE,
25413 segment_not_present, SEG_NOT_VECTOR, INTR_PRIVILEGE,
25414 stack_exception, STACK_FAULT_VECTOR, INTR_PRIVILEGE,
25415 general_protection, PROTECTION_VECTOR, INTR_PRIVILEGE,
25416 #if _WORD_SIZE == 4
25417 page_fault, PAGE_FAULT_VECTOR, INTR_PRIVILEGE,
25418 copr_error, COPROC_ERR_VECTOR, INTR_PRIVILEGE,
25419 #endif
25420 { hwint00, VECTOR( 0), INTR_PRIVILEGE },
25421 { hwint01, VECTOR( 1), INTR_PRIVILEGE },
25422 { hwint02, VECTOR( 2), INTR_PRIVILEGE },
25423 { hwint03, VECTOR( 3), INTR_PRIVILEGE },
25424 { hwint04, VECTOR( 4), INTR_PRIVILEGE },
25425 { hwint05, VECTOR( 5), INTR_PRIVILEGE },
25426 { hwint06, VECTOR( 6), INTR_PRIVILEGE },
25427 { hwint07, VECTOR( 7), INTR_PRIVILEGE },
25428 { hwint08, VECTOR( 8), INTR_PRIVILEGE },
25429 { hwint09, VECTOR( 9), INTR_PRIVILEGE },
25430 { hwint10, VECTOR(10), INTR_PRIVILEGE },
25431 { hwint11, VECTOR(11), INTR_PRIVILEGE },
25432 { hwint12, VECTOR(12), INTR_PRIVILEGE },
25433 { hwint13, VECTOR(13), INTR_PRIVILEGE },
25434 { hwint14, VECTOR(14), INTR_PRIVILEGE },
.Ep 348 src/kernel/protect.c
25435 { hwint15, VECTOR(15), INTR_PRIVILEGE },
25436 };
25437
25438 /* This is called early and can't use tables set up by main(). */
25439 data_bytes = (phys_bytes) sizes[1] << CLICK_SHIFT;
25440 if (sizes[0] == 0)
25441 code_bytes = data_bytes; /* common I&D */
25442 else
25443 code_bytes = (phys_bytes) sizes[0] << CLICK_SHIFT;
25444
25445 /* Build gdt and idt pointers in GDT where the BIOS expects them. */
25446 dtp= (struct desctableptr_s *) &gdt[GDT_INDEX];
25447 * (u16_t *) dtp->limit = (sizeof gdt) - 1;
25448 * (u32_t *) dtp->base = vir2phys(gdt);
25449
25450 dtp= (struct desctableptr_s *) &gdt[IDT_INDEX];
25451 * (u16_t *) dtp->limit = (sizeof idt) - 1;
25452 * (u32_t *) dtp->base = vir2phys(idt);
25453
25454 /* Build segment descriptors for tasks and interrupt handlers. */
25455 init_codeseg(&gdt[CS_INDEX], code_base, code_bytes, INTR_PRIVILEGE);
25456 init_dataseg(&gdt[DS_INDEX], data_base, data_bytes, INTR_PRIVILEGE);
25457 init_dataseg(&gdt[ES_INDEX], 0L, 0L, TASK_PRIVILEGE);
25458
25459 /* Build scratch descriptors for functions in klib88. */
25460 init_dataseg(&gdt[DS_286_INDEX], (phys_bytes) 0,
25461 (phys_bytes) MAX_286_SEG_SIZE, TASK_PRIVILEGE);
25462 init_dataseg(&gdt[ES_286_INDEX], (phys_bytes) 0,
25463 (phys_bytes) MAX_286_SEG_SIZE, TASK_PRIVILEGE);
25464
25465 /* Build local descriptors in GDT for LDT's in process table.
25466 * The LDT's are allocated at compile time in the process table, and
25467 * initialized whenever a process' map is initialized or changed.
25468 */
25469 for (rp = BEG_PROC_ADDR, ldt_selector = FIRST_LDT_INDEX * DESC_SIZE;
25470 rp < END_PROC_ADDR; ++rp, ldt_selector += DESC_SIZE) {
25471 init_dataseg(&gdt[ldt_selector / DESC_SIZE], vir2phys(rp->p_ldt),
25472 (phys_bytes) sizeof rp->p_ldt, INTR_PRIVILEGE);
25473 gdt[ldt_selector / DESC_SIZE].access = PRESENT | LDT;
25474 rp->p_ldt_sel = ldt_selector;
25475 }
25476
25477 /* Build main TSS.
25478 * This is used only to record the stack pointer to be used after an
25479 * interrupt.
25480 * The pointer is set up so that an interrupt automatically saves the
25481 * current process's registers ip:cs:f:sp:ss in the correct slots in the
25482 * process table.
25483 */
25484 tss.ss0 = DS_SELECTOR;
25485 init_dataseg(&gdt[TSS_INDEX], vir2phys(&tss), (phys_bytes) sizeof tss,
25486 INTR_PRIVILEGE);
25487 gdt[TSS_INDEX].access = PRESENT | (INTR_PRIVILEGE << DPL_SHIFT) | TSS_TYPE;
25488
25489 /* Build descriptors for interrupt gates in IDT. */
25490 for (gtp = &gate_table[0];
25491 gtp < &gate_table[sizeof gate_table / sizeof gate_table[0]]; ++gtp) {
25492 int_gate(gtp->vec_nr, (phys_bytes) (vir_bytes) gtp->gate,
25493 PRESENT | INT_GATE_TYPE | (gtp->privilege << DPL_SHIFT));
25494 }
.Op 349 src/kernel/protect.c
25495 int_gate(SYS_VECTOR, (phys_bytes) (vir_bytes) p_s_call,
25496 PRESENT | (USER_PRIVILEGE << DPL_SHIFT) | INT_GATE_TYPE);
25497 int_gate(LEVEL0_VECTOR, (phys_bytes) (vir_bytes) level0_call,
25498 PRESENT | (TASK_PRIVILEGE << DPL_SHIFT) | INT_GATE_TYPE);
25499
25500 #if _WORD_SIZE == 4
25501 /* Complete building of main TSS. */
25502 tss.iobase = sizeof tss; /* empty i/o permissions map */
25503
25504 /* Complete building of interrupt gates. */
25505 int_gate(SYS386_VECTOR, (phys_bytes) (vir_bytes) s_call,
25506 PRESENT | (USER_PRIVILEGE << DPL_SHIFT) | INT_GATE_TYPE);
25507 #endif
25508 }
25510 /*=========================================================================*
25511 * init_codeseg *
25512 *=========================================================================*/
25513 PUBLIC void init_codeseg(segdp, base, size, privilege)
25514 register struct segdesc_s *segdp;
25515 phys_bytes base;
25516 phys_bytes size;
25517 int privilege;
25518 {
25519 /* Build descriptor for a code segment. */
25520
25521 sdesc(segdp, base, size);
25522 segdp->access = (privilege << DPL_SHIFT)
25523 | (PRESENT | SEGMENT | EXECUTABLE | READABLE);
25524 /* CONFORMING = 0, ACCESSED = 0 */
25525 }
25527 /*=========================================================================*
25528 * init_dataseg *
25529 *=========================================================================*/
25530 PUBLIC void init_dataseg(segdp, base, size, privilege)
25531 register struct segdesc_s *segdp;
25532 phys_bytes base;
25533 phys_bytes size;
25534 int privilege;
25535 {
25536 /* Build descriptor for a data segment. */
25537
25538 sdesc(segdp, base, size);
25539 segdp->access = (privilege << DPL_SHIFT) | (PRESENT | SEGMENT | WRITEABLE);
25540 /* EXECUTABLE = 0, EXPAND_DOWN = 0, ACCESSED = 0 */
25541 }
25543 /*=========================================================================*
25544 * sdesc *
25545 *=========================================================================*/
25546 PRIVATE void sdesc(segdp, base, size)
25547 register struct segdesc_s *segdp;
25548 phys_bytes base;
25549 phys_bytes size;
25550 {
25551 /* Fill in the size fields (base, limit and granularity) of a descriptor. */
25552
25553 segdp->base_low = base;
25554 segdp->base_middle = base >> BASE_MIDDLE_SHIFT;
.Ep 350 src/kernel/protect.c
25555
25556 #if _WORD_SIZE == 4
25557 segdp->base_high = base >> BASE_HIGH_SHIFT;
25558 --size; /* convert to a limit, 0 size means 4G */
25559 if (size > BYTE_GRAN_MAX) {
25560 segdp->limit_low = size >> PAGE_GRAN_SHIFT;
25561 segdp->granularity = GRANULAR | (size >>
25562 (PAGE_GRAN_SHIFT + GRANULARITY_SHIFT));
25563 } else {
25564 segdp->limit_low = size;
25565 segdp->granularity = size >> GRANULARITY_SHIFT;
25566 }
25567 segdp->granularity |= DEFAULT; /* means BIG for data seg */
25568 #else
25569 segdp->limit_low = size - 1;
25570 #endif
25571 }
25573 /*=========================================================================*
25574 * seg2phys *
25575 *=========================================================================*/
25576 PUBLIC phys_bytes seg2phys(seg)
25577 U16_t seg;
25578 {
25579 /* Return the base address of a segment, with seg being either a 8086 segment
25580 * register, or a 286/386 segment selector.
25581 */
25582 phys_bytes base;
25583 struct segdesc_s *segdp;
25584
25585 if (!protected_mode) {
25586 base = hclick_to_physb(seg);
25587 } else {
25588 segdp = &gdt[seg >> 3];
25589 base = segdp->base_low | ((u32_t) segdp->base_middle << 16);
25590 #if _WORD_SIZE == 4
25591 base |= ((u32_t) segdp->base_high << 24);
25592 #endif
25593 }
25594 return base;
25595 }
25597 /*=========================================================================*
25598 * int_gate *
25599 *=========================================================================*/
25600 PRIVATE void int_gate(vec_nr, base, dpl_type)
25601 unsigned vec_nr;
25602 phys_bytes base;
25603 unsigned dpl_type;
25604 {
25605 /* Build descriptor for an interrupt gate. */
25606
25607 register struct gatedesc_s *idp;
25608
25609 idp = &idt[vec_nr];
25610 idp->offset_low = base;
25611 idp->selector = CS_SELECTOR;
25612 idp->p_dpl_type = dpl_type;
25613 #if _WORD_SIZE == 4
25614 idp->offset_high = base >> OFFSET_HIGH_SHIFT;
.Op 351 src/kernel/protect.c
25615 #endif
25616 }
25618 /*=========================================================================*
25619 * enable_iop *
25620 *=========================================================================*/
25621 PUBLIC void enable_iop(pp)
25622 struct proc *pp;
25623 {
25624 /* Allow a user process to use I/O instructions. Change the I/O Permission
25625 * Level bits in the psw. These specify least-privileged Current Permission
25626 * Level allowed to execute I/O instructions. Users and servers have CPL 3.
25627 * You can't have less privilege than that. Kernel has CPL 0, tasks CPL 1.
25628 */
25629 pp->p_reg.psw |= 0x3000;
25630 }
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
src/kernel/pty.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
25700 /* pty.c - pseudo terminal driver Author: Kees J. Bot
25701 * 30 Dec 1995
25702 * PTYs can be seen as a bidirectional pipe with TTY
25703 * input and output processing. For example a simple rlogin session:
25704 *
25705 * keyboard -> rlogin -> in.rld -> /dev/ptypX -> /dev/ttypX -> shell
25706 * shell -> /dev/ttypX -> /dev/ptypX -> in.rld -> rlogin -> screen
25707 *
25708 * This file takes care of copying data between the tty/pty device pairs and
25709 * the open/read/write/close calls on the pty devices. The TTY task takes
25710 * care of the input and output processing (interrupt, backspace, raw I/O,
25711 * etc.) using the pty_read() and pty_write() functions as the "keyboard" and
25712 * "screen" functions of the ttypX devices.
25713 * Be careful when reading this code, the terms "reading" and "writing" are
25714 * used both for the tty and the pty end of the pseudo tty. Writes to one
25715 * end are to be read at the other end and vice-versa.
25716 */
25717
25718 #include "kernel.h"
25719 #include <termios.h>
25720 #include <signal.h>
25721 #include <minix/com.h>
25722 #include <minix/callnr.h>
25723 #include "tty.h"
25724 #include "proc.h"
25725
25726 #if NR_PTYS > 0
25727
25728 /* PTY bookkeeping structure, one per pty/tty pair. */
25729 typedef struct pty {
25730 tty_t *tty; /* associated TTY structure */
25731 char state; /* flags: busy, closed, ... */
25732
25733 /* Read call on /dev/ptypX. */
25734 char rdrepcode; /* reply code, TASK_REPLY or REVIVE */
.Ep 352 src/kernel/pty.c
25735 char rdcaller; /* process making the call (usually FS) */
25736 char rdproc; /* process that wants to read from the pty */
25737 vir_bytes rdvir; /* virtual address in readers address space */
25738 int rdleft; /* # bytes yet to be read */
25739 int rdcum; /* # bytes written so far */
25740
25741 /* Write call to /dev/ptypX. */
25742 char wrrepcode; /* reply code, TASK_REPLY or REVIVE */
25743 char wrcaller; /* process making the call (usually FS) */
25744 char wrproc; /* process that wants to write to the pty */
25745 vir_bytes wrvir; /* virtual address in writers address space */
25746 int wrleft; /* # bytes yet to be written */
25747 int wrcum; /* # bytes written so far */
25748
25749 /* Output buffer. */
25750 int ocount; /* # characters in the buffer */
25751 char *ohead, *otail; /* head and tail of the circular buffer */
25752 char obuf[128]; /* buffer for bytes going to the pty reader */
25753 } pty_t;
25754
25755 #define PTY_ACTIVE 0x01 /* pty is open/active */
25756 #define TTY_CLOSED 0x02 /* tty side has closed down */
25757 #define PTY_CLOSED 0x04 /* pty side has closed down */
25758
25759 PRIVATE pty_t pty_table[NR_PTYS]; /* PTY bookkeeping */
25760
25761
25762 FORWARD _PROTOTYPE( void pty_write, (tty_t *tp) );
25763 FORWARD _PROTOTYPE( void pty_echo, (tty_t *tp, int c) );
25764 FORWARD _PROTOTYPE( void pty_start, (pty_t *pp) );
25765 FORWARD _PROTOTYPE( void pty_finish, (pty_t *pp) );
25766 FORWARD _PROTOTYPE( void pty_read, (tty_t *tp) );
25767 FORWARD _PROTOTYPE( void pty_close, (tty_t *tp) );
25768 FORWARD _PROTOTYPE( void pty_icancel, (tty_t *tp) );
25769 FORWARD _PROTOTYPE( void pty_ocancel, (tty_t *tp) );
25770
25771
25772 /*==========================================================================*
25773 * do_pty *
25774 *==========================================================================*/
25775 PUBLIC void do_pty(tp, m_ptr)
25776 tty_t *tp;
25777 message *m_ptr;
25778 {
25779 /* Perform an open/close/read/write call on a /dev/ptypX device. */
25780 pty_t *pp = tp->tty_priv;
25781 int r;
25782
25783 switch (m_ptr->m_type) {
25784 case DEV_READ:
25785 /* Check, store information on the reader, do I/O. */
25786 if (pp->state & TTY_CLOSED) {
25787 r = 0;
25788 break;
25789 }
25790 if (pp->rdleft != 0) {
25791 r = EIO;
25792 break;
25793 }
25794 if (m_ptr->COUNT <= 0) {
.Op 353 src/kernel/pty.c
25795 r = EINVAL;
25796 break;
25797 }
25798 if (numap(m_ptr->PROC_NR, (vir_bytes) m_ptr->ADDRESS,
25799 m_ptr->COUNT) == 0) {
25800 r = EFAULT;
25801 break;
25802 }
25803 pp->rdrepcode = TASK_REPLY;
25804 pp->rdcaller = m_ptr->m_source;
25805 pp->rdproc = m_ptr->PROC_NR;
25806 pp->rdvir = (vir_bytes) m_ptr->ADDRESS;
25807 pp->rdleft = m_ptr->COUNT;
25808 pty_start(pp);
25809 handle_events(tp);
25810 if (pp->rdleft == 0) return; /* already done */
25811
25812 if (m_ptr->TTY_FLAGS & O_NONBLOCK) {
25813 r = EAGAIN; /* don't suspend */
25814 pp->rdleft = pp->rdcum = 0;
25815 } else {
25816 r = SUSPEND; /* do suspend */
25817 pp->rdrepcode = REVIVE;
25818 }
25819 break;
25820
25821 case DEV_WRITE:
25822 /* Check, store information on the writer, do I/O. */
25823 if (pp->state & TTY_CLOSED) {
25824 r = EIO;
25825 break;
25826 }
25827 if (pp->wrleft != 0) {
25828 r = EIO;
25829 break;
25830 }
25831 if (m_ptr->COUNT <= 0) {
25832 r = EINVAL;
25833 break;
25834 }
25835 if (numap(m_ptr->PROC_NR, (vir_bytes) m_ptr->ADDRESS,
25836 m_ptr->COUNT) == 0) {
25837 r = EFAULT;
25838 break;
25839 }
25840 pp->wrrepcode = TASK_REPLY;
25841 pp->wrcaller = m_ptr->m_source;
25842 pp->wrproc = m_ptr->PROC_NR;
25843 pp->wrvir = (vir_bytes) m_ptr->ADDRESS;
25844 pp->wrleft = m_ptr->COUNT;
25845 handle_events(tp);
25846 if (pp->wrleft == 0) return; /* already done */
25847
25848 if (m_ptr->TTY_FLAGS & O_NONBLOCK) { /* don't suspend */
25849 r = pp->wrcum > 0 ? pp->wrcum : EAGAIN;
25850 pp->wrleft = pp->wrcum = 0;
25851 } else {
25852 pp->wrrepcode = REVIVE; /* do suspend */
25853 r = SUSPEND;
25854 }
.Ep 354 src/kernel/pty.c
25855 break;
25856
25857 case DEV_IOCTL:
25858 /* No ioctl's allowed on the pty side. */
25859 r = ENOTTY;
25860 break;
25861
25862 case DEV_OPEN:
25863 r = pp->state != 0 ? EIO : OK;
25864 pp->state |= PTY_ACTIVE;
25865 break;
25866
25867 case DEV_CLOSE:
25868 r = OK;
25869 if (pp->state & TTY_CLOSED) {
25870 pp->state = 0;
25871 } else {
25872 pp->state |= PTY_CLOSED;
25873 sigchar(tp, SIGHUP);
25874 }
25875 break;
25876
25877 case CANCEL:
25878 if (m_ptr->PROC_NR == pp->rdproc) {
25879 /* Cancel a read from a PTY. */
25880 pp->rdleft = pp->rdcum = 0;
25881 }
25882 if (m_ptr->PROC_NR == pp->wrproc) {
25883 /* Cancel a write to a PTY. */
25884 pp->wrleft = pp->wrcum = 0;
25885 }
25886 r = EINTR;
25887 break;
25888
25889 default:
25890 r = EINVAL;
25891 }
25892 tty_reply(TASK_REPLY, m_ptr->m_source, m_ptr->PROC_NR, r);
25893 }
25896 /*==========================================================================*
25897 * pty_write *
25898 *==========================================================================*/
25899 PRIVATE void pty_write(tp)
25900 tty_t *tp;
25901 {
25902 /* (*dev_write)() routine for PTYs. Transfer bytes from the writer on
25903 * /dev/ttypX to the output buffer.
25904 */
25905 pty_t *pp = tp->tty_priv;
25906 int count, ocount;
25907 phys_bytes user_phys;
25908
25909 /* PTY closed down? */
25910 if (pp->state & PTY_CLOSED) {
25911 if (tp->tty_outleft > 0) {
25912 tty_reply(tp->tty_outrepcode, tp->tty_outcaller,
25913 tp->tty_outproc, EIO);
25914 tp->tty_outleft = tp->tty_outcum = 0;
.Op 355 src/kernel/pty.c
25915 }
25916 return;
25917 }
25918
25919 /* While there is something to do. */
25920 for (;;) {
25921 ocount = buflen(pp->obuf) - pp->ocount;
25922 count = bufend(pp->obuf) - pp->ohead;
25923 if (count > ocount) count = ocount;
25924 if (count > tp->tty_outleft) count = tp->tty_outleft;
25925 if (count == 0 || tp->tty_inhibited) break;
25926
25927 /* Copy from user space to the PTY output buffer. */
25928 user_phys = proc_vir2phys(proc_addr(tp->tty_outproc), tp->tty_out_vir);
25929 phys_copy(user_phys, vir2phys(pp->ohead), (phys_bytes) count);
25930
25931 /* Perform output processing on the output buffer. */
25932 out_process(tp, pp->obuf, pp->ohead, bufend(pp->obuf), &count, &ocount);
25933 if (count == 0) break;
25934
25935 /* Assume echoing messed up by output. */
25936 tp->tty_reprint = TRUE;
25937
25938 /* Bookkeeping. */
25939 pp->ocount += ocount;
25940 if ((pp->ohead += ocount) >= bufend(pp->obuf))
25941 pp->ohead -= buflen(pp->obuf);
25942 pty_start(pp);
25943 tp->tty_out_vir += count;
25944 tp->tty_outcum += count;
25945 if ((tp->tty_outleft -= count) == 0) {
25946 /* Output is finished, reply to the writer. */
25947 tty_reply(tp->tty_outrepcode, tp->tty_outcaller,
25948 tp->tty_outproc, tp->tty_outcum);
25949 tp->tty_outcum = 0;
25950 }
25951 }
25952 pty_finish(pp);
25953 }
25956 /*==========================================================================*
25957 * pty_echo *
25958 *==========================================================================*/
25959 PRIVATE void pty_echo(tp, c)
25960 tty_t *tp;
25961 int c;
25962 {
25963 /* Echo one character. (Like pty_write, but only one character, optionally.) */
25964
25965 pty_t *pp = tp->tty_priv;
25966 int count, ocount;
25967
25968 ocount = buflen(pp->obuf) - pp->ocount;
25969 if (ocount == 0) return; /* output buffer full */
25970 count = 1;
25971 *pp->ohead = c; /* add one character */
25972
25973 out_process(tp, pp->obuf, pp->ohead, bufend(pp->obuf), &count, &ocount);
25974 if (count == 0) return;
.Ep 356 src/kernel/pty.c
25975
25976 pp->ocount += ocount;
25977 if ((pp->ohead += ocount) >= bufend(pp->obuf)) pp->ohead -= buflen(pp->obuf);
25978 pty_start(pp);
25979 }
25982 /*==========================================================================*
25983 * pty_start *
25984 *==========================================================================*/
25985 PRIVATE void pty_start(pp)
25986 pty_t *pp;
25987 {
25988 /* Transfer bytes written to the output buffer to the PTY reader. */
25989 int count;
25990 phys_bytes user_phys;
25991
25992 /* While there are things to do. */
25993 for (;;) {
25994 count = bufend(pp->obuf) - pp->otail;
25995 if (count > pp->ocount) count = pp->ocount;
25996 if (count > pp->rdleft) count = pp->rdleft;
25997 if (count == 0) break;
25998
25999 /* Copy from the output buffer to the readers address space. */
26000 user_phys = proc_vir2phys(proc_addr(pp->rdproc), pp->rdvir);
26001 phys_copy(vir2phys(pp->otail), user_phys, (phys_bytes) count);
26002
26003 /* Bookkeeping. */
26004 pp->ocount -= count;
26005 if ((pp->otail += count) == bufend(pp->obuf)) pp->otail = pp->obuf;
26006 pp->rdvir += count;
26007 pp->rdcum += count;
26008 pp->rdleft -= count;
26009 }
26010 }
26013 /*==========================================================================*
26014 * pty_finish *
26015 *==========================================================================*/
26016 PRIVATE void pty_finish(pp)
26017 pty_t *pp;
26018 {
26019 /* Finish the read request of a PTY reader if there is at least one byte
26020 * transferred.
26021 */
26022
26023 if (pp->rdcum > 0) {
26024 tty_reply(pp->rdrepcode, pp->rdcaller, pp->rdproc, pp->rdcum);
26025 pp->rdleft = pp->rdcum = 0;
26026 }
26027 }
26030 /*==========================================================================*
26031 * pty_read *
26032 *==========================================================================*/
26033 PRIVATE void pty_read(tp)
26034 tty_t *tp;
.Op 357 src/kernel/pty.c
26035 {
26036 /* Offer bytes from the PTY writer for input on the TTY. (Do it one byte at
26037 * a time, 99% of the writes will be for one byte, so no sense in being smart.)
26038 */
26039 pty_t *pp = tp->tty_priv;
26040 phys_bytes user_phys;
26041 char c;
26042
26043 if (pp->state & PTY_CLOSED) {
26044 if (tp->tty_inleft > 0) {
26045 tty_reply(tp->tty_inrepcode, tp->tty_incaller, tp->tty_inproc,
26046 tp->tty_incum);
26047 tp->tty_inleft = tp->tty_incum = 0;
26048 }
26049 return;
26050 }
26051
26052 while (pp->wrleft > 0) {
26053 /* Transfer one character to 'c'. */
26054 user_phys = proc_vir2phys(proc_addr(pp->wrproc), pp->wrvir);
26055 phys_copy(user_phys, vir2phys(&c), 1L);
26056
26057 /* Input processing. */
26058 if (in_process(tp, &c, 1) == 0) break;
26059
26060 /* PTY writer bookkeeping. */
26061 pp->wrvir++;
26062 pp->wrcum++;
26063 if (--pp->wrleft == 0) {
26064 tty_reply(pp->wrrepcode, pp->wrcaller, pp->wrproc, pp->wrcum);
26065 pp->wrcum = 0;
26066 }
26067 }
26068 }
26071 /*==========================================================================*
26072 * pty_close *
26073 *==========================================================================*/
26074 PRIVATE void pty_close(tp)
26075 tty_t *tp;
26076 {
26077 /* The tty side has closed, so shut down the pty side. */
26078 pty_t *pp = tp->tty_priv;
26079
26080 if (!(pp->state & PTY_ACTIVE)) return;
26081
26082 if (pp->rdleft > 0) {
26083 tty_reply(pp->rdrepcode, pp->rdcaller, pp->rdproc, 0);
26084 pp->rdleft = pp->rdcum = 0;
26085 }
26086
26087 if (pp->wrleft > 0) {
26088 tty_reply(pp->wrrepcode, pp->wrcaller, pp->wrproc, EIO);
26089 pp->wrleft = pp->wrcum = 0;
26090 }
26091
26092 if (pp->state & PTY_CLOSED) pp->state = 0; else pp->state |= TTY_CLOSED;
26093 }
.Ep 358 src/kernel/pty.c
26096 /*==========================================================================*
26097 * pty_icancel *
26098 *==========================================================================*/
26099 PRIVATE void pty_icancel(tp)
26100 tty_t *tp;
26101 {
26102 /* Discard waiting input. */
26103 pty_t *pp = tp->tty_priv;
26104
26105 if (pp->wrleft > 0) {
26106 tty_reply(pp->wrrepcode, pp->wrcaller, pp->wrproc,
26107 pp->wrcum + pp->wrleft);
26108 pp->wrleft = pp->wrcum = 0;
26109 }
26110 }
26113 /*==========================================================================*
26114 * pty_ocancel *
26115 *==========================================================================*/
26116 PRIVATE void pty_ocancel(tp)
26117 tty_t *tp;
26118 {
26119 /* Drain the output buffer. */
26120 pty_t *pp = tp->tty_priv;
26121
26122 pp->ocount = 0;
26123 pp->otail = pp->ohead;
26124 }
26127 /*==========================================================================*
26128 * pty_init *
26129 *==========================================================================*/
26130 PUBLIC void pty_init(tp)
26131 tty_t *tp;
26132 {
26133 pty_t *pp;
26134 int line;
26135
26136 /* Associate PTY and TTY structures. */
26137 line = tp - &tty_table[NR_CONS + NR_RS_LINES];
26138 pp = tp->tty_priv = &pty_table[line];
26139 pp->tty = tp;
26140
26141 /* Set up output queue. */
26142 pp->ohead = pp->otail = pp->obuf;
26143
26144 /* Fill in TTY function hooks. */
26145 tp->tty_devread = pty_read;
26146 tp->tty_devwrite = pty_write;
26147 tp->tty_echo = pty_echo;
26148 tp->tty_icancel = pty_icancel;
26149 tp->tty_ocancel = pty_ocancel;
26150 tp->tty_close = pty_close;
26151 }
26152 #endif /* NR_PTYS > 0 */
.Op 359 src/kernel/rs232.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
src/kernel/rs232.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
26200 /*==========================================================================*
26201 * rs232.c - serial driver for 8250 and 16450 UARTs *
26202 * Added support for Atari ST M68901 and YM-2149 --kub *
26203 *==========================================================================*/
26204
26205 #include "kernel.h"
26206 #include <termios.h>
26207 #include <signal.h>
26208 #include "tty.h"
26209 #include "proc.h"
26210
26211 #if NR_RS_LINES > 0
26212
26213 #if (MACHINE != IBM_PC) && (MACHINE != ATARI)
26214 #error /* rs232.c only supports PC and Atari ST */
26215 #endif
26216
26217 #if (MACHINE == ATARI)
26218 #include "staddr.h"
26219 #include "stsound.h"
26220 #include "stmfp.h"
26221 #if (NR_RS_LINES > 1)
26222 #error /* Only one physical RS232 line available */
26223 #endif
26224 #endif
26225
26226 #if (MACHINE == IBM_PC) /* PC/AT 8250/16450 chip combination */
26227
26228 /* 8250 constants. */
26229 #define UART_FREQ 115200L /* timer frequency */
26230
26231 /* Interrupt enable bits. */
26232 #define IE_RECEIVER_READY 1
26233 #define IE_TRANSMITTER_READY 2
26234 #define IE_LINE_STATUS_CHANGE 4
26235 #define IE_MODEM_STATUS_CHANGE 8
26236
26237 /* Interrupt status bits. */
26238 #define IS_MODEM_STATUS_CHANGE 0
26239 #define IS_TRANSMITTER_READY 2
26240 #define IS_RECEIVER_READY 4
26241 #define IS_LINE_STATUS_CHANGE 6
26242
26243 /* Line control bits. */
26244 #define LC_2STOP_BITS 0x04
26245 #define LC_PARITY 0x08
26246 #define LC_PAREVEN 0x10
26247 #define LC_BREAK 0x40
26248 #define LC_ADDRESS_DIVISOR 0x80
26249
26250 /* Line status bits. */
26251 #define LS_OVERRUN_ERR 2
26252 #define LS_PARITY_ERR 4
26253 #define LS_FRAMING_ERR 8
26254 #define LS_BREAK_INTERRUPT 0x10
.Ep 360 src/kernel/rs232.c
26255 #define LS_TRANSMITTER_READY 0x20
26256
26257 /* Modem control bits. */
26258 #define MC_DTR 1
26259 #define MC_RTS 2
26260 #define MC_OUT2 8 /* required for PC & AT interrupts */
26261
26262 /* Modem status bits. */
26263 #define MS_CTS 0x10
26264 #define MS_RLSD 0x80 /* Received Line Signal Detect */
26265 #define MS_DRLSD 0x08 /* RLSD Delta */
26266
26267 #else /* MACHINE == ATARI */ /* Atari ST 68901 USART */
26268
26269 /* Most of the USART constants are already defined in stmfp.h . The local
26270 * definitions made here are for keeping C code changes smaller. --kub
26271 */
26272
26273 #define UART_FREQ 19200L /* timer frequency */
26274
26275 /* Line status bits. */
26276 #define LS_OVERRUN_ERR R_OE
26277 #define LS_PARITY_ERR R_PE
26278 #define LS_FRAMING_ERR R_FE
26279 #define LS_BREAK_INTERRUPT R_BREAK
26280
26281 /* Modem status bits. */
26282 #define MS_CTS IO_SCTS /* 0x04 */
26283
26284 #endif /* MACHINE == ATARI */
26285
26286 #define DATA_BITS_SHIFT 8 /* amount data bits shifted in mode */
26287 #define DEF_BAUD 1200 /* default baud rate */
26288
26289 #define RS_IBUFSIZE 1024 /* RS232 input buffer size */
26290 #define RS_OBUFSIZE 1024 /* RS232 output buffer size */
26291
26292 /* Input buffer watermarks.
26293 * The external device is asked to stop sending when the buffer
26294 * exactly reaches high water, or when TTY requests it. Sending restarts
26295 * when the input buffer empties below the low watermark.
26296 */
26297 #define RS_ILOWWATER (1 * RS_IBUFSIZE / 4)
26298 #define RS_IHIGHWATER (3 * RS_IBUFSIZE / 4)
26299
26300 /* Output buffer low watermark.
26301 * TTY is notified when the output buffer empties below the low watermark, so
26302 * it may continue filling the buffer if doing a large write.
26303 */
26304 #define RS_OLOWWATER (1 * RS_OBUFSIZE / 4)
26305
26306 #if (MACHINE == IBM_PC)
26307
26308 /* Macros to handle flow control.
26309 * Interrupts must be off when they are used.
26310 * Time is critical - already the function call for out_byte() is annoying.
26311 * If out_byte() can be done in-line, tests to avoid it can be dropped.
26312 * istart() tells external device we are ready by raising RTS.
26313 * istop() tells external device we are not ready by dropping RTS.
26314 * DTR is kept high all the time (it probably should be raised by open and
.Op 361 src/kernel/rs232.c
26315 * dropped by close of the device).
26316 * OUT2 is also kept high all the time.
26317 */
26318 #define istart(rs)
26319 (out_byte((rs)->modem_ctl_port, MC_OUT2 | MC_RTS | MC_DTR),
26320 (rs)->idevready = TRUE)
26321 #define istop(rs)
26322 (out_byte((rs)->modem_ctl_port, MC_OUT2 | MC_DTR),
26323 (rs)->idevready = FALSE)
26324
26325 /* Macro to tell if device is ready. The rs->cts field is set to MS_CTS if
26326 * CLOCAL is in effect for a line without a CTS wire.
26327 */
26328 #define devready(rs) ((in_byte(rs->modem_status_port) | rs->cts) & MS_CTS)
26329
26330 /* Macro to tell if transmitter is ready. */
26331 #define txready(rs) (in_byte(rs->line_status_port) & LS_TRANSMITTER_READY)
26332
26333 /* Macro to tell if carrier has dropped.
26334 * The RS232 Carrier Detect (CD) line is usually connected to the 8250
26335 * Received Line Signal Detect pin, reflected by bit MS_RLSD in the Modem
26336 * Status Register. The MS_DRLSD bit tells if MS_RLSD has just changed state.
26337 * So if MS_DRLSD is set and MS_RLSD cleared, we know that carrier has just
26338 * dropped.
26339 */
26340 #define devhup(rs)
26341 (in_byte(rs->modem_status_port) & (MS_RLSD|MS_DRLSD) == MS_DRLSD)
26342
26343 #else /* MACHINE == ATARI */
26344
26345 /* Macros to handle flow control.
26346 * Time is critical - already the function call for lock()/restore() is
26347 * annoying.
26348 * istart() tells external device we are ready by raising RTS.
26349 * istop() tells external device we are not ready by dropping RTS.
26350 * DTR is kept high all the time (it probably should be raised by open and
26351 * dropped by close of the device). NOTE: The modem lines are active low.
26352 */
26353 #define set_porta(msk,val) { register int s = lock();
26354 SOUND->sd_selr = YM_IOA;
26355 SOUND->sd_wdat =
26356 SOUND->sd_rdat & (msk) | (val);
26357 restore(s); }
26358 #define istart(rs) { set_porta( ~(PA_SRTS|PA_SDTR),0 );
26359 (rs)->idevready = TRUE; }
26360 #define istop(rs) { set_porta( ~PA_SDTR, PA_SRTS );
26361 (rs)->idevready = FALSE; }
26362
26363 /* Macro to tell if device is ready. The rs->cts field is set to MS_CTS if
26364 * CLOCAL is in effect for a line without a CTS wire.
26365 */
26366 #define devready(rs) ((~MFP->mf_gpip | rs->cts) & MS_CTS)
26367
26368 /* Transmitter ready test */
26369 #define txready(rs) (MFP->mf_tsr & (T_EMPTY | T_UE))
26370
26371 #endif /* MACHINE == ATARI */
26372
26373 /* Types. */
26374 typedef unsigned char bool_t; /* boolean */
.Ep 362 src/kernel/rs232.c
26375
26376 /* RS232 device structure, one per device. */
26377 typedef struct rs232 {
26378 tty_t *tty; /* associated TTY structure */
26379
26380 int icount; /* number of bytes in the input buffer */
26381 char *ihead; /* next free spot in input buffer */
26382 char *itail; /* first byte to give to TTY */
26383 bool_t idevready; /* nonzero if we are ready to receive (RTS) */
26384 char cts; /* normally 0, but MS_CTS if CLOCAL is set */
26385
26386 unsigned char ostate; /* combination of flags: */
26387 #define ODONE 1 /* output completed (< output enable bits) */
26388 #define ORAW 2 /* raw mode for xoff disable (< enab. bits) */
26389 #define OWAKEUP 4 /* tty_wakeup() pending (asm code only) */
26390 #define ODEVREADY MS_CTS /* external device hardware ready (CTS) */
26391 #define OQUEUED 0x20 /* output buffer not empty */
26392 #define OSWREADY 0x40 /* external device software ready (no xoff) */
26393 #define ODEVHUP MS_RLSD /* external device has dropped carrier */
26394 #define OSOFTBITS (ODONE | ORAW | OWAKEUP | OQUEUED | OSWREADY)
26395 /* user-defined bits */
26396 #if (OSOFTBITS | ODEVREADY | ODEVHUP) == OSOFTBITS
26397 /* a weak sanity check */
26398 #error /* bits are not unique */
26399 #endif
26400 unsigned char oxoff; /* char to stop output */
26401 bool_t inhibited; /* output inhibited? (follows tty_inhibited) */
26402 bool_t drain; /* if set drain output and reconfigure line */
26403 int ocount; /* number of bytes in the output buffer */
26404 char *ohead; /* next free spot in output buffer */
26405 char *otail; /* next char to output */
26406
26407 #if (MACHINE == IBM_PC)
26408 port_t xmit_port; /* i/o ports */
26409 port_t recv_port;
26410 port_t div_low_port;
26411 port_t div_hi_port;
26412 port_t int_enab_port;
26413 port_t int_id_port;
26414 port_t line_ctl_port;
26415 port_t modem_ctl_port;
26416 port_t line_status_port;
26417 port_t modem_status_port;
26418 #endif
26419
26420 unsigned char lstatus; /* last line status */
26421 unsigned char pad; /* ensure alignment for 16-bit ints */
26422 unsigned framing_errors; /* error counts (no reporting yet) */
26423 unsigned overrun_errors;
26424 unsigned parity_errors;
26425 unsigned break_interrupts;
26426
26427 char ibuf[RS_IBUFSIZE]; /* input buffer */
26428 char obuf[RS_OBUFSIZE]; /* output buffer */
26429 } rs232_t;
26430
26431 PUBLIC rs232_t rs_lines[NR_RS_LINES];
26432
26433 /* Table and macro to translate an RS232 line number to its rs_lines entry. */
26434 PRIVATE rs232_t *p_rs_addr[NR_RS_LINES];
.Op 363 src/kernel/rs232.c
26435
26436 #define rs_addr(line) (p_rs_addr[line])
26437
26438 #if (MACHINE == IBM_PC)
26439 /* 8250 base addresses. */
26440 PRIVATE port_t addr_8250[] = {
26441 0x3F8, /* COM1: (line 0); COM3 might be at 0x3E8 */
26442 0x2F8, /* COM2: (line 1); COM4 might be at 0x2E8 */
26443 };
26444 #endif
26445
26446 FORWARD _PROTOTYPE( int rs232_1handler, (int irq) );
26447 FORWARD _PROTOTYPE( int rs232_2handler, (int irq) );
26448 FORWARD _PROTOTYPE( void in_int, (rs232_t *rs) );
26449 FORWARD _PROTOTYPE( void line_int, (rs232_t *rs) );
26450 FORWARD _PROTOTYPE( void modem_int, (rs232_t *rs) );
26451 FORWARD _PROTOTYPE( void rs_write, (tty_t *tp) );
26452 FORWARD _PROTOTYPE( void rs_echo, (tty_t *tp, int c) );
26453 FORWARD _PROTOTYPE( void rs_ioctl, (tty_t *tp) );
26454 FORWARD _PROTOTYPE( void rs_config, (rs232_t *rs) );
26455 FORWARD _PROTOTYPE( void rs_read, (tty_t *tp) );
26456 FORWARD _PROTOTYPE( void rs_icancel, (tty_t *tp) );
26457 FORWARD _PROTOTYPE( void rs_ocancel, (tty_t *tp) );
26458 FORWARD _PROTOTYPE( void rs_ostart, (rs232_t *rs) );
26459 FORWARD _PROTOTYPE( void rs_break, (tty_t *tp) );
26460 FORWARD _PROTOTYPE( void out_int, (rs232_t *rs) );
26461
26462
26463 /*==========================================================================*
26464 * rs_write *
26465 *==========================================================================*/
26466 PRIVATE void rs_write(tp)
26467 register tty_t *tp;
26468 {
26469 /* (*devwrite)() routine for RS232. */
26470
26471 rs232_t *rs = tp->tty_priv;
26472 int count, ocount;
26473 phys_bytes user_phys;
26474
26475 if (rs->inhibited != tp->tty_inhibited) {
26476 /* Inhibition state has changed. */
26477 lock();
26478 rs->ostate |= OSWREADY;
26479 if (tp->tty_inhibited) rs->ostate &= ~OSWREADY;
26480 unlock();
26481 rs->inhibited = tp->tty_inhibited;
26482 }
26483
26484 if (rs->drain) {
26485 /* Wait for the line to drain then reconfigure and continue output. */
26486 if (rs->ocount > 0) return;
26487 rs->drain = FALSE;
26488 rs_config(rs);
26489 }
26490
26491 /* While there is something to do. */
26492 for (;;) {
26493 ocount = buflen(rs->obuf) - rs->ocount;
26494 count = bufend(rs->obuf) - rs->ohead;
.Ep 364 src/kernel/rs232.c
26495 if (count > ocount) count = ocount;
26496 if (count > tp->tty_outleft) count = tp->tty_outleft;
26497 if (count == 0 || tp->tty_inhibited) return;
26498
26499 /* Copy from user space to the RS232 output buffer. */
26500 user_phys = proc_vir2phys(proc_addr(tp->tty_outproc), tp->tty_out_vir);
26501 phys_copy(user_phys, vir2phys(rs->ohead), (phys_bytes) count);
26502
26503 /* Perform output processing on the output buffer. */
26504 out_process(tp, rs->obuf, rs->ohead, bufend(rs->obuf), &count, &ocount);
26505 if (count == 0) break;
26506
26507 /* Assume echoing messed up by output. */
26508 tp->tty_reprint = TRUE;
26509
26510 /* Bookkeeping. */
26511 lock(); /* protect interrupt sensitive rs->ocount */
26512 rs->ocount += ocount;
26513 rs_ostart(rs);
26514 unlock();
26515 if ((rs->ohead += ocount) >= bufend(rs->obuf))
26516 rs->ohead -= buflen(rs->obuf);
26517 tp->tty_out_vir += count;
26518 tp->tty_outcum += count;
26519 if ((tp->tty_outleft -= count) == 0) {
26520 /* Output is finished, reply to the writer. */
26521 tty_reply(tp->tty_outrepcode, tp->tty_outcaller,
26522 tp->tty_outproc, tp->tty_outcum);
26523 tp->tty_outcum = 0;
26524 }
26525 }
26526 }
26529 /*==========================================================================*
26530 * rs_echo *
26531 *==========================================================================*/
26532 PRIVATE void rs_echo(tp, c)
26533 tty_t *tp; /* which TTY */
26534 int c; /* character to echo */
26535 {
26536 /* Echo one character. (Like rs_write, but only one character, optionally.) */
26537
26538 rs232_t *rs = tp->tty_priv;
26539 int count, ocount;
26540
26541 ocount = buflen(rs->obuf) - rs->ocount;
26542 if (ocount == 0) return; /* output buffer full */
26543 count = 1;
26544 *rs->ohead = c; /* add one character */
26545
26546 out_process(tp, rs->obuf, rs->ohead, bufend(rs->obuf), &count, &ocount);
26547 if (count == 0) return;
26548
26549 lock();
26550 rs->ocount += ocount;
26551 rs_ostart(rs);
26552 unlock();
26553 if ((rs->ohead += ocount) >= bufend(rs->obuf)) rs->ohead -= buflen(rs->obuf);
26554 }
.Op 365 src/kernel/rs232.c
26557 /*==========================================================================*
26558 * rs_ioctl *
26559 *==========================================================================*/
26560 PRIVATE void rs_ioctl(tp)
26561 tty_t *tp; /* which TTY */
26562 {
26563 /* Reconfigure the line as soon as the output has drained. */
26564 rs232_t *rs = tp->tty_priv;
26565
26566 rs->drain = TRUE;
26567 }
26570 /*==========================================================================*
26571 * rs_config *
26572 *==========================================================================*/
26573 PRIVATE void rs_config(rs)
26574 rs232_t *rs; /* which line */
26575 {
26576 /* Set various line control parameters for RS232 I/O.
26577 * If DataBits == 5 and StopBits == 2, 8250 will generate 1.5 stop bits.
26578 * The 8250 can't handle split speed, so we use the input speed.
26579 */
26580
26581 tty_t *tp = rs->tty;
26582 int divisor;
26583 int line_controls;
26584 static struct speed2divisor {
26585 speed_t speed;
26586 int divisor;
26587 } s2d[] = {
26588 #if (MACHINE == IBM_PC)
26589 { B50, UART_FREQ / 50 },
26590 #endif
26591 { B75, UART_FREQ / 75 },
26592 { B110, UART_FREQ / 110 },
26593 { B134, UART_FREQ * 10 / 1345 },
26594 { B150, UART_FREQ / 150 },
26595 { B200, UART_FREQ / 200 },
26596 { B300, UART_FREQ / 300 },
26597 { B600, UART_FREQ / 600 },
26598 { B1200, UART_FREQ / 1200 },
26599 #if (MACHINE == IBM_PC)
26600 { B1800, UART_FREQ / 1800 },
26601 #endif
26602 { B2400, UART_FREQ / 2400 },
26603 { B4800, UART_FREQ / 4800 },
26604 { B9600, UART_FREQ / 9600 },
26605 { B19200, UART_FREQ / 19200 },
26606 #if (MACHINE == IBM_PC)
26607 { B38400, UART_FREQ / 38400 },
26608 { B57600, UART_FREQ / 57600 },
26609 { B115200, UART_FREQ / 115200L },
26610 #endif
26611 };
26612 struct speed2divisor *s2dp;
26613
26614 /* RS232 needs to know the xoff character, and if CTS works. */
.Ep 366 src/kernel/rs232.c
26615 rs->oxoff = tp->tty_termios.c_cc[VSTOP];
26616 rs->cts = (tp->tty_termios.c_cflag & CLOCAL) ? MS_CTS : 0;
26617
26618 /* Look up the 8250 rate divisor from the output speed. */
26619 divisor = 0;
26620 for (s2dp = s2d; s2dp < s2d + sizeof(s2d)/sizeof(s2d[0]); s2dp++) {
26621 if (s2dp->speed == tp->tty_termios.c_ospeed) divisor = s2dp->divisor;
26622 }
26623 if (divisor == 0) return; /* B0? */
26624
26625 #if (MACHINE == IBM_PC)
26626 /* Compute line control flag bits. */
26627 line_controls = 0;
26628 if (tp->tty_termios.c_cflag & PARENB) {
26629 line_controls |= LC_PARITY;
26630 if (!(tp->tty_termios.c_cflag & PARODD)) line_controls |= LC_PAREVEN;
26631 }
26632 if (divisor >= (UART_FREQ / 110)) line_controls |= LC_2STOP_BITS;
26633 line_controls |= (tp->tty_termios.c_cflag & CSIZE) >> 2;
26634
26635 /* Lock out interrupts while setting the speed. The receiver register is
26636 * going to be hidden by the div_low register, but the input interrupt
26637 * handler relies on reading it to clear the interrupt and avoid looping
26638 * forever.
26639 */
26640 lock();
26641
26642 /* Select the baud rate divisor registers and change the rate. */
26643 out_byte(rs->line_ctl_port, LC_ADDRESS_DIVISOR);
26644 out_byte(rs->div_low_port, divisor);
26645 out_byte(rs->div_hi_port, divisor >> 8);
26646
26647 /* Change the line controls and reselect the usual registers. */
26648 out_byte(rs->line_ctl_port, line_controls);
26649
26650 rs->ostate |= ORAW;
26651 if ((tp->tty_termios.c_lflag & IXON) && rs->oxoff != _POSIX_VDISABLE)
26652 rs->ostate &= ~ORAW;
26653
26654 unlock();
26655
26656 #else /* MACHINE == ATARI */
26657
26658 line_controls = U_Q16;
26659 if (tp->tty_termios.c_cflag & PARENB) {
26660 line_controls |= U_PAR;
26661 if (!(tp->tty_termios.c_cflag & PARODD)) line_controls |= U_EVEN;
26662 }
26663 line_controls |= (divisor >= (UART_FREQ / 110)) ? U_ST2 : U_ST1;
26664
26665 switch (tp->tty_termios.c_cflag & CSIZE) { /* XXX - are U_Dn like CSn? */
26666 case CS5: line_controls |= U_D5; break;
26667 case CS5: line_controls |= U_D6; break;
26668 case CS5: line_controls |= U_D7; break;
26669 case CS5: line_controls |= U_D8; break;
26670 }
26671 lock();
26672 MFP->mf_ucr = line_controls;
26673 MFP->mf_tddr = divisor;
26674 unlock();
.Op 367 src/kernel/rs232.c
26675 #endif /* MACHINE == ATARI */
26676 }
26679 /*==========================================================================*
26680 * rs_init *
26681 *==========================================================================*/
26682 PUBLIC void rs_init(tp)
26683 tty_t *tp; /* which TTY */
26684 {
26685 /* Initialize RS232 for one line. */
26686
26687 register rs232_t *rs;
26688 int line;
26689 #if (MACHINE == IBM_PC)
26690 port_t this_8250;
26691 int irq;
26692 long v;
26693 #endif
26694
26695 /* Associate RS232 and TTY structures. */
26696 line = tp - &tty_table[NR_CONS];
26697 rs = tp->tty_priv = &rs_lines[line];
26698 rs->tty = tp;
26699
26700 /* Set up input queue. */
26701 rs->ihead = rs->itail = rs->ibuf;
26702
26703 #if (MACHINE == IBM_PC)
26704 /* Precalculate port numbers for speed. Magic numbers in the code (once). */
26705 this_8250 = addr_8250[line];
26706 rs->xmit_port = this_8250 + 0;
26707 rs->recv_port = this_8250 + 0;
26708 rs->div_low_port = this_8250 + 0;
26709 rs->div_hi_port = this_8250 + 1;
26710 rs->int_enab_port = this_8250 + 1;
26711 rs->int_id_port = this_8250 + 2;
26712 rs->line_ctl_port = this_8250 + 3;
26713 rs->modem_ctl_port = this_8250 + 4;
26714 rs->line_status_port = this_8250 + 5;
26715 rs->modem_status_port = this_8250 + 6;
26716 #endif
26717
26718 /* Set up the hardware to a base state, in particular
26719 * o turn off DTR (MC_DTR) to try to stop the external device.
26720 * o be careful about the divisor latch. Some BIOS's leave it enabled
26721 * here and that caused trouble (no interrupts) in version 1.5 by
26722 * hiding the interrupt enable port in the next step, and worse trouble
26723 * (continual interrupts) in an old version by hiding the receiver
26724 * port in the first interrupt. Call rs_ioctl() early to avoid this.
26725 * o disable interrupts at the chip level, to force an edge transition
26726 * on the 8259 line when interrupts are next enabled and active.
26727 * RS232 interrupts are guaranteed to be disabled now by the 8259
26728 * mask, but there used to be trouble if the mask was set without
26729 * handling a previous interrupt.
26730 */
26731 istop(rs); /* sets modem_ctl_port */
26732 rs_config(rs);
26733 #if (MACHINE == IBM_PC)
26734 out_byte(rs->int_enab_port, 0);
.Ep 368 src/kernel/rs232.c
26735 #endif
26736
26737 /* Clear any harmful leftover interrupts. An output interrupt is harmless
26738 * and will occur when interrupts are enabled anyway. Set up the output
26739 * queue using the status from clearing the modem status interrupt.
26740 */
26741 #if (MACHINE == IBM_PC)
26742 in_byte(rs->line_status_port);
26743 in_byte(rs->recv_port);
26744 #endif
26745 rs->ostate = devready(rs) | ORAW | OSWREADY; /* reads modem_ctl_port */
26746 rs->ohead = rs->otail = rs->obuf;
26747
26748 #if (MACHINE == IBM_PC)
26749 /* Enable interrupts for both interrupt controller and device. */
26750 irq = (line & 1) ? SECONDARY_IRQ : RS232_IRQ;
26751
26752 #if ENABLE_NETWORKING
26753 /* The ethernet driver may steal the IRQ of an RS232 line. */
26754 v = ETHER_IRQ;
26755 switch (env_parse("DPETH0", "x:d:x", 1, &v, 0L, (long) NR_IRQ_VECTORS-1)) {
26756 case EP_ON:
26757 case EP_SET:
26758 if (v == irq) return; /* IRQ in use, don't configure line */
26759 }
26760 #endif
26761
26762 put_irq_handler(irq, (line & 1) ? rs232_2handler : rs232_1handler);
26763 enable_irq(irq);
26764 out_byte(rs->int_enab_port, IE_LINE_STATUS_CHANGE | IE_MODEM_STATUS_CHANGE
26765 | IE_RECEIVER_READY | IE_TRANSMITTER_READY);
26766 #else /* MACHINE == ATARI */
26767 /* Initialize the 68901 chip, then enable interrupts. */
26768 MFP->mf_scr = 0x00;
26769 MFP->mf_tcdcr |= T_Q004;
26770 MFP->mf_rsr = R_ENA;
26771 MFP->mf_tsr = T_ENA;
26772 MFP->mf_aer = (MFP->mf_aer | (IO_SCTS|IO_SDCD)) ^
26773 (MFP->mf_gpip & (IO_SCTS|IO_SDCD));
26774 MFP->mf_ddr = (MFP->mf_ddr & ~ (IO_SCTS|IO_SDCD));
26775 MFP->mf_iera |= (IA_RRDY|IA_RERR|IA_TRDY|IA_TERR);
26776 MFP->mf_imra |= (IA_RRDY|IA_RERR|IA_TRDY|IA_TERR);
26777 MFP->mf_ierb |= (IB_SCTS|IB_SDCD);
26778 MFP->mf_imrb |= (IB_SCTS|IB_SDCD);
26779 #endif /* MACHINE == ATARI */
26780
26781 /* Fill in TTY function hooks. */
26782 tp->tty_devread = rs_read;
26783 tp->tty_devwrite = rs_write;
26784 tp->tty_echo = rs_echo;
26785 tp->tty_icancel = rs_icancel;
26786 tp->tty_ocancel = rs_ocancel;
26787 tp->tty_ioctl = rs_ioctl;
26788 tp->tty_break = rs_break;
26789
26790 /* Tell external device we are ready. */
26791 istart(rs);
26792 }
.Op 369 src/kernel/rs232.c
26795 /*==========================================================================*
26796 * rs_icancel *
26797 *==========================================================================*/
26798 PRIVATE void rs_icancel(tp)
26799 tty_t *tp; /* which TTY */
26800 {
26801 /* Cancel waiting input. */
26802 rs232_t *rs = tp->tty_priv;
26803
26804 lock();
26805 rs->icount = 0;
26806 rs->itail = rs->ihead;
26807 istart(rs);
26808 unlock();
26809 }
26812 /*==========================================================================*
26813 * rs_ocancel *
26814 *==========================================================================*/
26815 PRIVATE void rs_ocancel(tp)
26816 tty_t *tp; /* which TTY */
26817 {
26818 /* Cancel pending output. */
26819 rs232_t *rs = tp->tty_priv;
26820
26821 lock();
26822 rs->ostate &= ~(ODONE | OQUEUED);
26823 rs->ocount = 0;
26824 rs->otail = rs->ohead;
26825 unlock();
26826 }
26829 /*==========================================================================*
26830 * rs_read *
26831 *==========================================================================*/
26832 PRIVATE void rs_read(tp)
26833 tty_t *tp; /* which tty */
26834 {
26835 /* Process characters from the circular input buffer. */
26836
26837 rs232_t *rs = tp->tty_priv;
26838 int icount, count, ostate;
26839
26840 if (!(tp->tty_termios.c_cflag & CLOCAL)) {
26841 /* Send a SIGHUP if hangup detected. */
26842 lock();
26843 ostate = rs->ostate;
26844 rs->ostate &= ~ODEVHUP; /* save ostate, clear DEVHUP */
26845 unlock();
26846 if (ostate & ODEVHUP) { sigchar(tp, SIGHUP); return; }
26847 }
26848
26849 while ((count = rs->icount) > 0) {
26850 icount = bufend(rs->ibuf) - rs->itail;
26851 if (count > icount) count = icount;
26852
26853 /* Perform input processing on (part of) the input buffer. */
26854 if ((count = in_process(tp, rs->itail, count)) == 0) break;
.Ep 370 src/kernel/rs232.c
26855
26856 lock(); /* protect interrupt sensitive variables */
26857 rs->icount -= count;
26858 if (!rs->idevready && rs->icount < RS_ILOWWATER) istart(rs);
26859 unlock();
26860 if ((rs->itail += count) == bufend(rs->ibuf)) rs->itail = rs->ibuf;
26861 }
26862 }
26865 /*==========================================================================*
26866 * rs_ostart *
26867 *==========================================================================*/
26868 PRIVATE void rs_ostart(rs)
26869 rs232_t *rs; /* which rs line */
26870 {
26871 /* Tell RS232 there is something waiting in the output buffer. */
26872
26873 rs->ostate |= OQUEUED;
26874 if (txready(rs)) out_int(rs);
26875 }
26878 /*==========================================================================*
26879 * rs_break *
26880 *==========================================================================*/
26881 PRIVATE void rs_break(tp)
26882 tty_t *tp; /* which tty */
26883 {
26884 /* Generate a break condition by setting the BREAK bit for 0.4 sec. */
26885 rs232_t *rs = tp->tty_priv;
26886 int line_controls;
26887
26888 line_controls = in_byte(rs->line_ctl_port);
26889 out_byte(rs->line_ctl_port, line_controls | LC_BREAK);
26890 milli_delay(400); /* ouch */
26891 out_byte(rs->line_ctl_port, line_controls);
26892 }
26895 /* Low level (interrupt) routines. */
26896
26897 #if (MACHINE == IBM_PC)
26898 /*==========================================================================*
26899 * rs232_1handler *
26900 *==========================================================================*/
26901 PRIVATE int rs232_1handler(irq)
26902 int irq;
26903 {
26904 /* Interrupt hander for IRQ4.
26905 * Only 1 line (usually COM1) should use it.
26906 */
26907
26908 register rs232_t *rs = &rs_lines[0];
26909
26910 while (TRUE) {
26911 /* Loop to pick up ALL pending interrupts for device.
26912 * This usually just wastes time unless the hardware has a buffer
26913 * (and then we have to worry about being stuck in the loop too long).
26914 * Unfortunately, some serial cards lock up without this.
.Op 371 src/kernel/rs232.c
26915 */
26916 switch (in_byte(rs->int_id_port)) {
26917 case IS_RECEIVER_READY:
26918 in_int(rs);
26919 continue;
26920 case IS_TRANSMITTER_READY:
26921 out_int(rs);
26922 continue;
26923 case IS_MODEM_STATUS_CHANGE:
26924 modem_int(rs);
26925 continue;
26926 case IS_LINE_STATUS_CHANGE:
26927 line_int(rs);
26928 continue;
26929 }
26930 return(1); /* reenable serial interrupt */
26931 }
26932 }
26935 /*==========================================================================*
26936 * rs232_2handler *
26937 *==========================================================================*/
26938 PRIVATE int rs232_2handler(irq)
26939 int irq;
26940 {
26941 /* Interrupt hander for IRQ3.
26942 * Only 1 line (usually COM2) should use it.
26943 */
26944
26945 register rs232_t *rs = &rs_lines[1];
26946
26947 while (TRUE) {
26948 switch (in_byte(rs->int_id_port)) {
26949 case IS_RECEIVER_READY:
26950 in_int(rs);
26951 continue;
26952 case IS_TRANSMITTER_READY:
26953 out_int(rs);
26954 continue;
26955 case IS_MODEM_STATUS_CHANGE:
26956 modem_int(rs);
26957 continue;
26958 case IS_LINE_STATUS_CHANGE:
26959 line_int(rs);
26960 continue;
26961 }
26962 return(1); /* reenable serial interrupt */
26963 }
26964 }
26965 #else /* MACHINE == ATARI */
26966 /*==========================================================================*
26967 * siaint *
26968 *==========================================================================*/
26969 PRIVATE void siaint(type)
26970 int type; /* interrupt type */
26971 {
26972 /* siaint is the rs232 interrupt procedure for Atari ST's. For ST there are
26973 * as much as 5 interrupt lines used for rs232. The trap type byte left on the
26974 * stack by the assembler interrupt handler identifies the interrupt cause.
.Ep 372 src/kernel/rs232.c
26975 */
26976
26977 register unsigned char code;
26978 register rs232_t *rs = &rs_lines[0];
26979 int s = lock();
26980
26981 switch (type & 0x00FF)
26982 {
26983 case 0x00: /* receive buffer full */
26984 in_int(rs);
26985 break;
26986 case 0x01: /* receive error */
26987 line_int(rs);
26988 break;
26989 case 0x02: /* transmit buffer empty */
26990 out_int(rs);
26991 break;
26992 case 0x03: /* transmit error */
26993 code = MFP->mf_tsr;
26994 if (code & ~(T_ENA | T_UE | T_EMPTY))
26995 {
26996 printf("sia: transmit error: status=%xrn", code);
26997 /* MFP->mf_udr = lastchar; */ /* retry */
26998 }
26999 break;
27000 case 0x04: /* modem lines change */
27001 modem_int(rs);
27002 break;
27003 }
27004 restore(s);
27005 }
27006 #endif /* MACHINE == ATARI */
27007
27008
27009 /*==========================================================================*
27010 * in_int *
27011 *==========================================================================*/
27012 PRIVATE void in_int(rs)
27013 register rs232_t *rs; /* line with input interrupt */
27014 {
27015 /* Read the data which just arrived.
27016 * If it is the oxoff char, clear OSWREADY, else if OSWREADY was clear, set
27017 * it and restart output (any char does this, not just xon).
27018 * Put data in the buffer if room, otherwise discard it.
27019 * Set a flag for the clock interrupt handler to eventually notify TTY.
27020 */
27021
27022 int c;
27023
27024 #if (MACHINE == IBM_PC)
27025 c = in_byte(rs->recv_port);
27026 #else /* MACHINE == ATARI */
27027 c = MFP->mf_udr;
27028 #endif
27029
27030 if (!(rs->ostate & ORAW)) {
27031 if (c == rs->oxoff) {
27032 rs->ostate &= ~OSWREADY;
27033 } else
27034 if (!(rs->ostate & OSWREADY)) {
.Op 373 src/kernel/rs232.c
27035 rs->ostate |= OSWREADY;
27036 if (txready(rs)) out_int(rs);
27037 }
27038 }
27039
27040 if (rs->icount == buflen(rs->ibuf)) return; /* input buffer full, discard */
27041
27042 if (++rs->icount == RS_IHIGHWATER && rs->idevready) istop(rs);
27043 *rs->ihead = c;
27044 if (++rs->ihead == bufend(rs->ibuf)) rs->ihead = rs->ibuf;
27045 if (rs->icount == 1) {
27046 rs->tty->tty_events = 1;
27047 force_timeout();
27048 }
27049 }
27052 /*==========================================================================*
27053 * line_int *
27054 *==========================================================================*/
27055 PRIVATE void line_int(rs)
27056 register rs232_t *rs; /* line with line status interrupt */
27057 {
27058 /* Check for and record errors. */
27059
27060 #if (MACHINE == IBM_PC)
27061 rs->lstatus = in_byte(rs->line_status_port);
27062 #else /* MACHINE == ATARI */
27063 rs->lstatus = MFP->mf_rsr;
27064 MFP->mf_rsr &= R_ENA;
27065 rs->pad = MFP->mf_udr; /* discard char in case of LS_OVERRUN_ERR */
27066 #endif /* MACHINE == ATARI */
27067 if (rs->lstatus & LS_FRAMING_ERR) ++rs->framing_errors;
27068 if (rs->lstatus & LS_OVERRUN_ERR) ++rs->overrun_errors;
27069 if (rs->lstatus & LS_PARITY_ERR) ++rs->parity_errors;
27070 if (rs->lstatus & LS_BREAK_INTERRUPT) ++rs->break_interrupts;
27071 }
27074 /*==========================================================================*
27075 * modem_int *
27076 *==========================================================================*/
27077 PRIVATE void modem_int(rs)
27078 register rs232_t *rs; /* line with modem interrupt */
27079 {
27080 /* Get possibly new device-ready status, and clear ODEVREADY if necessary.
27081 * If the device just became ready, restart output.
27082 */
27083
27084 #if (MACHINE == ATARI)
27085 /* Set active edge interrupt so that next change causes a new interrupt */
27086 MFP->mf_aer = (MFP->mf_aer | (IO_SCTS|IO_SDCD)) ^
27087 (MFP->mf_gpip & (IO_SCTS|IO_SDCD));
27088 #endif
27089
27090 if (devhup(rs)) {
27091 rs->ostate |= ODEVHUP;
27092 rs->tty->tty_events = 1;
27093 force_timeout();
27094 }
.Ep 374 src/kernel/rs232.c
27095
27096 if (!devready(rs))
27097 rs->ostate &= ~ODEVREADY;
27098 else if (!(rs->ostate & ODEVREADY)) {
27099 rs->ostate |= ODEVREADY;
27100 if (txready(rs)) out_int(rs);
27101 }
27102 }
27105 /*==========================================================================*
27106 * out_int *
27107 *==========================================================================*/
27108 PRIVATE void out_int(rs)
27109 register rs232_t *rs; /* line with output interrupt */
27110 {
27111 /* If there is output to do and everything is ready, do it (local device is
27112 * known ready).
27113 * Notify TTY when the buffer goes empty.
27114 */
27115
27116 if (rs->ostate >= (ODEVREADY | OQUEUED | OSWREADY)) {
27117 /* Bit test allows ORAW and requires the others. */
27118 #if (MACHINE == IBM_PC)
27119 out_byte(rs->xmit_port, *rs->otail);
27120 #else /* MACHINE == ATARI */
27121 MFP->mf_udr = *rs->otail;
27122 #endif
27123 if (++rs->otail == bufend(rs->obuf)) rs->otail = rs->obuf;
27124 if (--rs->ocount == 0) {
27125 rs->ostate ^= (ODONE | OQUEUED); /* ODONE on, OQUEUED off */
27126 rs->tty->tty_events = 1;
27127 force_timeout();
27128 } else
27129 if (rs->ocount == RS_OLOWWATER) { /* running low? */
27130 rs->tty->tty_events = 1;
27131 force_timeout();
27132 }
27133 }
27134 }
27135 #endif /* NR_RS_LINES > 0 */
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
src/kernel/sb16_dsp.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
27200 /* This file contains the driver for a DSP (Digital Sound Processor) on
27201 * a SoundBlaster 16 (ASP) soundcard.
27202 *
27203 * The driver supports the following operations (using message format m2):
27204 *
27205 * m_type DEVICE PROC_NR COUNT POSITION ADRRESS
27206 * ----------------------------------------------------------------
27207 * | DEV_OPEN | device | proc nr | | | |
27208 * |------------+---------+---------+---------+---------+---------|
27209 * | DEV_CLOSE | device | proc nr | | | |
.Op 375 src/kernel/sb16_dsp.c
27210 * |------------+---------+---------+---------+---------+---------|
27211 * | DEV_READ | device | proc nr | bytes | | buf ptr |
27212 * |------------+---------+---------+---------+---------+---------|
27213 * | DEV_WRITE | device | proc nr | bytes | | buf ptr |
27214 * |------------+---------+---------+---------+---------+---------|
27215 * | DEV_IOCTL | device | proc nr |func code| | buf ptr |
27216 * ----------------------------------------------------------------
27217 *
27218 * The file contains one entry point:
27219 *
27220 * dsp_task: main entry when system is brought up
27221 *
27222 * May 20 1995 Author: Michel R. Prevenier
27223 */
27224
27225
27226 #include "kernel.h"
27227 #include <minix/com.h>
27228 #include <minix/callnr.h>
27229 #include <sys/ioctl.h>
27230 #if __minix_vmd
27231 #include "proc.h"
27232 #include "config.h"
27233 #endif
27234 #include "sb16.h"
27235
27236 #if ENABLE_SB_AUDIO
27237
27238 /* prototypes */
27239 FORWARD _PROTOTYPE( void init_buffer, (void));
27240 FORWARD _PROTOTYPE( int dsp_init, (void));
27241 FORWARD _PROTOTYPE( int dsp_handler, (int irq));
27242 FORWARD _PROTOTYPE( int dsp_open, (message *m_ptr));
27243 FORWARD _PROTOTYPE( int dsp_close, (message *m_ptr));
27244 FORWARD _PROTOTYPE( int dsp_ioctl, (message *m_ptr));
27245 FORWARD _PROTOTYPE( int dsp_write, (message *m_ptr));
27246 FORWARD _PROTOTYPE( int dsp_read, (message *m_ptr));
27247 FORWARD _PROTOTYPE( int dsp_reset, (void));
27248 FORWARD _PROTOTYPE( int dsp_command, (int value));
27249 FORWARD _PROTOTYPE( int dsp_set_speed, (unsigned int speed));
27250 FORWARD _PROTOTYPE( int dsp_set_size, (unsigned int size));
27251 FORWARD _PROTOTYPE( int dsp_set_stereo, (unsigned int stereo));
27252 FORWARD _PROTOTYPE( int dsp_set_bits, (unsigned int bits));
27253 FORWARD _PROTOTYPE( int dsp_set_sign, (unsigned int sign));
27254 FORWARD _PROTOTYPE( void dsp_dma_setup, (phys_bytes address, int count));
27255 FORWARD _PROTOTYPE( void dsp_setup, (void));
27256
27257 /* globals */
27258 #if __minix_vmd
27259 PRIVATE int DspTasknr = ANY;
27260 #endif
27261 PRIVATE int DspVersion[2];
27262 PRIVATE unsigned int DspStereo = DEFAULT_STEREO;
27263 PRIVATE unsigned int DspSpeed = DEFAULT_SPEED;
27264 PRIVATE unsigned int DspBits = DEFAULT_BITS;
27265 PRIVATE unsigned int DspSign = DEFAULT_SIGN;
27266 PRIVATE unsigned int DspFragmentSize = DSP_MAX_FRAGMENT_SIZE;
27267 PRIVATE int DspAvail = 0;
27268 PRIVATE int DspBusy = 0;
27269 PRIVATE int DmaBusy = 0;
.Ep 376 src/kernel/sb16_dsp.c
27270 PRIVATE int DmaDone = 1;
27271 PRIVATE int DmaMode = 0;
27272
27273 PRIVATE char DmaBuffer[(long)2 * DMA_SIZE];
27274 PRIVATE char *DmaPtr;
27275 PRIVATE phys_bytes DmaPhys;
27276
27277
27278 /*=========================================================================*
27279 * dsp_task *
27280 *=========================================================================*/
27281 PUBLIC void dsp_task()
27282 {
27283 message mess;
27284 int err, caller, proc_nr;
27285
27286 #if __minix_vmd
27287 DspTasknr = proc_number(proc_ptr);
27288 #endif
27289
27290 /* initialize the DMA buffer */
27291 init_buffer();
27292
27293 /* Here is the main loop of the sound task. It waits for a message, carries
27294 * it out, and sends a reply.
27295 */
27296 while (TRUE)
27297 {
27298 receive(ANY, &mess);
27299
27300 caller = mess.m_source;
27301 proc_nr = mess.PROC_NR;
27302
27303 switch (caller)
27304 {
27305 case HARDWARE:
27306 /* Leftover interrupt. */
27307 continue;
27308 case FS_PROC_NR:
27309 /* The only legitimate caller. */
27310 break;
27311 default:
27312 printf("sb16: got message from %dn", caller);
27313 continue;
27314 }
27315
27316 /* Now carry out the work. */
27317 switch(mess.m_type)
27318 {
27319 case DEV_OPEN: err = dsp_open(&mess);break;
27320 case DEV_CLOSE: err = dsp_close(&mess);break;
27321 case DEV_IOCTL: err = dsp_ioctl(&mess);break;
27322 case DEV_READ: err = dsp_read(&mess);break;
27323 case DEV_WRITE: err = dsp_write(&mess);break;
27324 default: err = EINVAL;break;
27325 }
27326
27327 /* Finally, prepare and send the reply message. */
27328 mess.m_type = TASK_REPLY;
27329 mess.REP_PROC_NR = proc_nr;
.Op 377 src/kernel/sb16_dsp.c
27330
27331 mess.REP_STATUS = err; /* #bytes transfered or error code */
27332 send(caller, &mess); /* send reply to caller */
27333 }
27334 }
27337 /*===========================================================================*
27338 * init_buffer *
27339 *===========================================================================*/
27340 PRIVATE void init_buffer()
27341 {
27342 /* Select a buffer that can safely be used for dma transfers.
27343 * Its absolute address is 'DmaPhys', the normal address is 'DmaPtr'.
27344 */
27345
27346 DmaPtr = DmaBuffer;
27347 DmaPhys = vir2phys(DmaBuffer);
27348
27349 if (dma_bytes_left(DmaPhys) < DMA_SIZE) {
27350 /* First half of buffer crosses a 64K boundary, can't DMA into that */
27351 DmaPtr += DMA_SIZE;
27352 DmaPhys += DMA_SIZE;
27353 }
27354 }
27357 /*=========================================================================*
27358 * dsp_open *
27359 *=========================================================================*/
27360 PRIVATE int dsp_open(m_ptr)
27361 message *m_ptr;
27362 {
27363
27364 #if SB_DEBUG
27365 printf("sb16_openn");
27366 #endif
27367
27368 /* try to detect SoundBlaster card */
27369 if (!DspAvail && dsp_init() != OK) return EIO;
27370
27371 /* Only one open at a time with soundcards */
27372 if (DspBusy) return EBUSY;
27373
27374 /* Start with a clean DSP */
27375 if (dsp_reset() != OK) return EIO;
27376
27377 /* Setup default values */
27378 DspStereo = DEFAULT_STEREO;
27379 DspSpeed = DEFAULT_SPEED;
27380 DspBits = DEFAULT_BITS;
27381 DspSign = DEFAULT_SIGN;
27382 DspFragmentSize = DMA_SIZE;
27383
27384 DspBusy = 1;
27385 DmaBusy = 0;
27386
27387 return OK;
27388 }
.Ep 378 src/kernel/sb16_dsp.c
27391 /*=========================================================================*
27392 * dsp_close *
27393 *=========================================================================*/
27394 PRIVATE int dsp_close(m_ptr)
27395 message *m_ptr;
27396 {
27397
27398 #if SB_DEBUG
27399 printf("dsp_closen");
27400 #endif
27401
27402 DspBusy = 0; /* soundcard available again */
27403 DmaBusy = 0;
27404
27405 return OK;
27406 }
27409 /*=========================================================================*
27410 * dsp_ioctl *
27411 *=========================================================================*/
27412 PRIVATE int dsp_ioctl(m_ptr)
27413 message *m_ptr;
27414 {
27415 int status;
27416 phys_bytes user_phys;
27417 unsigned int val;
27418
27419 /* Cannot change parameters during play or recording */
27420 if (DmaBusy) return EBUSY;
27421
27422 /* Get user data */
27423 if (m_ptr->REQUEST != DSPIORESET)
27424 {
27425 user_phys = numap(m_ptr->PROC_NR, (vir_bytes) m_ptr->ADDRESS,
27426 sizeof(unsigned int));
27427 if (user_phys == 0) return(EFAULT);
27428 phys_copy(user_phys, vir2phys(&val), (phys_bytes) sizeof(val));
27429 }
27430
27431 #if SB_DEBUG
27432 printf("dsp_ioctl: got ioctl %d, argument: %dn", m_ptr->REQUEST, val);
27433 #endif
27434
27435 switch(m_ptr->REQUEST)
27436 {
27437 case DSPIORATE: status = dsp_set_speed(val);break;
27438 case DSPIOSTEREO: status = dsp_set_stereo(val);break;
27439 case DSPIOBITS: status = dsp_set_bits(val);break;
27440 case DSPIOSIZE: status = dsp_set_size(val);break;
27441 case DSPIOSIGN: status = dsp_set_sign(val);break;
27442 case DSPIOMAX: {
27443 val = DMA_SIZE;
27444 phys_copy(vir2phys(&val), user_phys,
27445 (phys_bytes) sizeof(val));
27446 status = OK;
27447 };break;
27448 case DSPIORESET: status = dsp_reset();break;
27449 default: status = ENOTTY;break;
.Op 379 src/kernel/sb16_dsp.c
27450 }
27451
27452 return status;
27453 }
27456 /*=========================================================================*
27457 * dsp_init *
27458 *=========================================================================*/
27459 PRIVATE int dsp_init()
27460 {
27461 int i;
27462
27463 if (dsp_reset () != OK)
27464 {
27465 printf("sb16: No SoundBlaster card detectedn");
27466 return -1;
27467 }
27468
27469 DspVersion[0] = DspVersion[1] = 0;
27470 dsp_command(DSP_GET_VERSION); /* Get DSP version bytes */
27471
27472 for (i = 1000; i; i--)
27473 {
27474 if (in_byte (DSP_DATA_AVL) & 0x80)
27475 {
27476 if (DspVersion[0] == 0)
27477 DspVersion[0] = in_byte (DSP_READ);
27478 else
27479 {
27480 DspVersion[1] = in_byte (DSP_READ);
27481 break;
27482 }
27483 }
27484 }
27485
27486 if (DspVersion[0] < 4)
27487 {
27488 printf("sb16: No SoundBlaster 16 compatible card detectedn");
27489 return -1;
27490 }
27491 else
27492 printf ("sb16: SoundBlaster DSP version %d.%d detectedn",
27493 DspVersion[0], DspVersion[1]);
27494
27495 /* set IRQ and DMA channels */
27496 mixer_set(MIXER_SET_IRQ, (1 << (SB_IRQ / 2 - 1)));
27497 mixer_set(MIXER_SET_DMA, (1 << SB_DMA_8 | 1 << SB_DMA_16));
27498
27499 /* register interrupt vector and enable irq */
27500 put_irq_handler(SB_IRQ, dsp_handler);
27501 enable_irq(SB_IRQ);
27502
27503 DspAvail = 1;
27504 return OK;
27505 }
27508 /*=========================================================================*
27509 * dsp_handler *
.Ep 380 src/kernel/sb16_dsp.c
27510 *=========================================================================*/
27511 PRIVATE int dsp_handler(irq)
27512 int irq;
27513 {
27514
27515 #if SB_DEBUG2
27516 printf("SoundBlaster interrupt %dn", irq);
27517 #endif
27518
27519 if (DmaDone) /* Dma transfer is done */
27520 {
27521 /* Send DSP command to stop dma */
27522 dsp_command((DspBits == 8 ? DSP_CMD_DMA8HALT : DSP_CMD_DMA16HALT));
27523
27524 DmaBusy = 0; /* Dma available again */
27525 }
27526
27527 /* Send interrupt to audio task and enable again */
27528 #if __minix_vmd
27529 interrupt(DspTasknr);
27530 #else
27531 interrupt(AUDIO);
27532 #endif
27533
27534 /* Acknowledge the interrupt on the DSP */
27535 (void) in_byte((DspBits == 8 ? DSP_DATA_AVL : DSP_DATA16_AVL));
27536
27537 return 1;
27538 }
27541 /*=========================================================================*
27542 * dsp_command *
27543 *=========================================================================*/
27544 PRIVATE int dsp_command(value)
27545 int value;
27546 {
27547 int i;
27548
27549 for (i = 0; i < SB_TIMEOUT; i++)
27550 {
27551 if ((in_byte (DSP_STATUS) & 0x80) == 0)
27552 {
27553 out_byte (DSP_COMMAND, value);
27554 return OK;
27555 }
27556 }
27557
27558 printf ("sb16: SoundBlaster: DSP Command(%x) timeoutn", value);
27559 return -1;
27560 }
27563 /*=========================================================================*
27564 * dsp_reset *
27565 *=========================================================================*/
27566 PRIVATE int dsp_reset(void)
27567 {
27568 int i;
27569
.Op 381 src/kernel/sb16_dsp.c
27570 out_byte (DSP_RESET, 1);
27571 for(i =0; i<1000; i++); /* wait a while */
27572 out_byte (DSP_RESET, 0);
27573
27574 for (i = 0; i < 1000 && !(in_byte (DSP_DATA_AVL) & 0x80); i++);
27575
27576 if (in_byte (DSP_READ) != 0xAA) return EIO; /* No SoundBlaster */
27577
27578 DmaBusy = 0;
27579 DmaDone = 1;
27580
27581 return OK;
27582 }
27585 /*=========================================================================*
27586 * dsp_set_speed *
27587 *=========================================================================*/
27588 static int dsp_set_speed(speed)
27589 unsigned int speed;
27590 {
27591 #if SB_DEBUG
27592 printf("sb16: setting speed to %u, stereo = %dn", speed, DspStereo);
27593 #endif
27594
27595 if (speed < DSP_MIN_SPEED || speed > DSP_MAX_SPEED)
27596 return EPERM;
27597
27598 /* Soundblaster 16 can be programmed with real sample rates
27599 * instead of time constants
27600 *
27601 * Since you cannot sample and play at the same time
27602 * we set in- and output rate to the same value
27603 */
27604
27605 lock(); /* disable interrupts */
27606 dsp_command(DSP_INPUT_RATE); /* set input rate */
27607 dsp_command(speed >> 8); /* high byte of speed */
27608 dsp_command(speed); /* low byte of speed */
27609 dsp_command(DSP_OUTPUT_RATE); /* same for output rate */
27610 dsp_command(speed >> 8);
27611 dsp_command(speed);
27612 unlock(); /* enable interrupts */
27613
27614 DspSpeed = speed;
27615
27616 return OK;
27617 }
27620 /*=========================================================================*
27621 * dsp_set_stereo *
27622 *=========================================================================*/
27623 static int dsp_set_stereo(stereo)
27624 unsigned int stereo;
27625 {
27626 if (stereo)
27627 DspStereo = 1;
27628 else
27629 DspStereo = 0;
.Ep 382 src/kernel/sb16_dsp.c
27630
27631 return OK;
27632 }
27635 /*=========================================================================*
27636 * dsp_set_bits *
27637 *=========================================================================*/
27638 static int dsp_set_bits(bits)
27639 unsigned int bits;
27640 {
27641 /* Sanity checks */
27642 if (bits != 8 && bits != 16) return EINVAL;
27643
27644 DspBits = bits;
27645
27646 return OK;
27647 }
27650 /*=========================================================================*
27651 * dsp_set_size *
27652 *=========================================================================*/
27653 static int dsp_set_size(size)
27654 unsigned int size;
27655 {
27656
27657 #if SB_DEBUG
27658 printf("sb16: set fragment size to %un", size);
27659 #endif
27660
27661 /* Sanity checks */
27662 if (size < DSP_MIN_FRAGMENT_SIZE ||
27663 size > DSP_MAX_FRAGMENT_SIZE ||
27664 size % 2 != 0)
27665 return EINVAL;
27666
27667 DspFragmentSize = size;
27668
27669 return OK;
27670 }
27673 /*=========================================================================*
27674 * dsp_set_sign *
27675 *=========================================================================*/
27676 static int dsp_set_sign(sign)
27677 unsigned int sign;
27678 {
27679
27680 #if SB_DEBUG
27681 printf("sb16: set sign to %un", sign);
27682 #endif
27683
27684 DspSign = (sign > 0 ? 1 : 0);
27685
27686 return OK;
27687 }
.Op 383 src/kernel/sb16_dsp.c
27690 /*===========================================================================*
27691 * dsp_dma_setup *
27692 *===========================================================================*/
27693 PRIVATE void dsp_dma_setup(address, count)
27694 phys_bytes address;
27695 int count;
27696
27697 {
27698 #if SB_DEBUG
27699 printf("Setting up %d bit DMAn", DspBits);
27700 #endif
27701
27702 if (DspBits == 8) /* 8 bit sound */
27703 {
27704 count--;
27705
27706 lock();
27707 out_byte(DMA8_MASK, SB_DMA_8 | 0x04); /* Disable DMA channel */
27708 out_byte(DMA8_CLEAR, 0x00); /* Clear flip flop */
27709
27710 /* set DMA mode */
27711 out_byte(DMA8_MODE,
27712 (DmaMode == DEV_WRITE ? DMA8_AUTO_PLAY : DMA8_AUTO_REC));
27713
27714 out_byte(DMA8_ADDR, address >> 0); /* Low_byte of address */
27715 out_byte(DMA8_ADDR, address >> 8); /* High byte of address */
27716 out_byte(DMA8_PAGE, address >> 16); /* 64K page number */
27717 out_byte(DMA8_COUNT, count >> 0); /* Low byte of count */
27718 out_byte(DMA8_COUNT, count >> 8); /* High byte of count */
27719 out_byte(DMA8_MASK, SB_DMA_8); /* Enable DMA channel */
27720 unlock();
27721 }
27722 else /* 16 bit sound */
27723 {
27724 count-= 2;
27725
27726 lock();
27727 out_byte(DMA16_MASK, (SB_DMA_16 & 3) | 0x04); /* Disable DMA channel */
27728 out_byte(DMA16_CLEAR, 0x00); /* Clear flip flop */
27729
27730 /* Set dma mode */
27731 out_byte(DMA16_MODE,
27732 (DmaMode == DEV_WRITE ? DMA16_AUTO_PLAY : DMA16_AUTO_REC));
27733
27734 out_byte(DMA16_ADDR, (address >> 1) & 0xFF); /* Low_byte of address */
27735 out_byte(DMA16_ADDR, (address >> 9) & 0xFF); /* High byte of address */
27736 out_byte(DMA16_PAGE, (address >> 16) & 0xFE); /* 128K page number */
27737 out_byte(DMA16_COUNT, count >> 1); /* Low byte of count */
27738 out_byte(DMA16_COUNT, count >> 9); /* High byte of count */
27739 out_byte(DMA16_MASK, SB_DMA_16 & 3); /* Enable DMA channel */
27740 unlock();
27741 }
27742 }
27745 /*===========================================================================*
27746 * dsp_setup *
27747 *===========================================================================*/
27748 PRIVATE void dsp_setup()
27749 {
.Ep 384 src/kernel/sb16_dsp.c
27750 /* Set current sample speed */
27751 dsp_set_speed(DspSpeed);
27752
27753 /* Put the speaker on */
27754 if (DmaMode == DEV_WRITE)
27755 {
27756 dsp_command (DSP_CMD_SPKON); /* put speaker on */
27757
27758 /* Program DSP with dma mode */
27759 dsp_command((DspBits == 8 ? DSP_CMD_8BITAUTO_OUT : DSP_CMD_16BITAUTO_OUT));
27760 }
27761 else
27762 {
27763 dsp_command (DSP_CMD_SPKOFF); /* put speaker off */
27764
27765 /* Program DSP with dma mode */
27766 dsp_command((DspBits == 8 ? DSP_CMD_8BITAUTO_IN : DSP_CMD_16BITAUTO_IN));
27767 }
27768
27769 /* Program DSP with transfer mode */
27770 if (!DspSign)
27771 dsp_command((DspStereo == 1 ? DSP_MODE_STEREO_US : DSP_MODE_MONO_US));
27772 else
27773 dsp_command((DspStereo == 1 ? DSP_MODE_STEREO_S : DSP_MODE_MONO_S));
27774
27775 /* Give length of fragment to DSP */
27776 if (DspBits == 8) /* 8 bit transfer */
27777 {
27778 /* #bytes - 1 */
27779 dsp_command((DspFragmentSize - 1) >> 0);
27780 dsp_command((DspFragmentSize - 1) >> 8);
27781 }
27782 else /* 16 bit transfer */
27783 {
27784 /* #words - 1 */
27785 dsp_command((DspFragmentSize - 1) >> 1);
27786 dsp_command((DspFragmentSize - 1) >> 9);
27787 }
27788 }
27789
27790
27791 /*===========================================================================*
27792 * dsp_write *
27793 *===========================================================================*/
27794 PRIVATE int dsp_write(m_ptr)
27795 message *m_ptr;
27796 {
27797 phys_bytes user_phys;
27798 message mess;
27799
27800 if (m_ptr->COUNT != DspFragmentSize) return EINVAL;
27801
27802 /* From this user address */
27803 user_phys = numap(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, DspFragmentSize);
27804 if (user_phys == 0) return EINVAL;
27805
27806 if (DmaBusy) /* Dma already started */
27807 {
27808 if (DmaMode != m_ptr->m_type) return EBUSY;
27809
.Op 385 src/kernel/sb16_dsp.c
27810 DmaDone = 0; /* No, we're not done yet */
27811
27812 /* Wait for next block to become free */
27813 receive(HARDWARE, &mess);
27814
27815 /* Copy first block to dma buffer */
27816 phys_copy(user_phys, DmaPhys, (phys_bytes) DspFragmentSize);
27817
27818 }
27819 else /* A new dma transfer has started */
27820 {
27821 DmaMode = DEV_WRITE; /* Dma mode is writing */
27822
27823 /* Copy fragment to dma buffer */
27824 phys_copy(user_phys, DmaPhys, (phys_bytes) DspFragmentSize);
27825
27826 /* Set up the dma chip */
27827 dsp_dma_setup(DmaPhys, DspFragmentSize);
27828
27829 /* Set up the DSP */
27830 dsp_setup();
27831
27832 DmaBusy = 1; /* Dma is busy */
27833 }
27834
27835 DmaDone = 1; /* dma done for now */
27836
27837 return(DspFragmentSize);
27838 }
27841 /*===========================================================================*
27842 * dsp_read *
27843 *===========================================================================*/
27844 PRIVATE int dsp_read(m_ptr)
27845 message *m_ptr;
27846 {
27847 phys_bytes user_phys;
27848 message mess;
27849
27850 if (m_ptr->COUNT != DspFragmentSize) return EINVAL;
27851
27852 /* To this user address */
27853 user_phys = numap(m_ptr->PROC_NR, (vir_bytes)m_ptr->ADDRESS, DspFragmentSize);
27854 if (user_phys == 0) return EINVAL;
27855
27856 if (DmaBusy) /* Dma already started */
27857 {
27858 if (DmaMode != m_ptr->m_type) return EBUSY;
27859
27860 DmaDone = 0; /* No, we're not done yet */
27861
27862 /* Wait for a full dma buffer */
27863 receive(HARDWARE, &mess);
27864
27865 /* Copy the buffer */
27866 phys_copy(DmaPhys, user_phys, (phys_bytes) DspFragmentSize);
27867 }
27868 else /* A new dma transfer has started */
27869 {
.Ep 386 src/kernel/sb16_dsp.c
27870 DmaMode = DEV_READ; /* Dma mode is reading */
27871
27872 /* Set up the dma chip */
27873 dsp_dma_setup(DmaPhys, DspFragmentSize);
27874
27875 /* Set up the DSP */
27876 dsp_setup();
27877
27878 DmaBusy = 1; /* Dma has started */
27879 DmaDone = 0; /* Dma not done */
27880
27881 /* Wait for dma to finish with first block */
27882 receive(HARDWARE, &mess);
27883
27884 /* Copy dma buffer to user */
27885 phys_copy(DmaPhys, user_phys, (phys_bytes) DspFragmentSize);
27886 }
27887
27888 DmaDone = 1; /* dma done for now */
27889
27890 return(DspFragmentSize);
27891 }
27892 #endif /* ENABLE_AUDIO */
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
src/kernel/sb16_mixer.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
27900 /* This file contains the driver for the mixer on
27901 * a SoundBlaster 16 (ASP) soundcard.
27902 *
27903 * The driver supports the following operations (using message format m2):
27904 *
27905 * m_type DEVICE PROC_NR COUNT POSITION ADRRESS
27906 * ----------------------------------------------------------------
27907 * | DEV_OPEN | device | proc nr | | | |
27908 * |------------+---------+---------+---------+---------+---------|
27909 * | DEV_CLOSE | device | proc nr | | | |
27910 * |------------+---------+---------+---------+---------+---------|
27911 * | DEV_IOCTL | device | proc nr |func code| | buf_ptr |
27912 * ----------------------------------------------------------------
27913 *
27914 * The file contains one entry point:
27915 *
27916 * mixer_task: main entry when system is brought up
27917 *
27918 * May 20 1995 Author: Michel R. Prevenier
27919 */
27920
27921
27922 #include "kernel.h"
27923 #include <minix/com.h>
27924 #include <minix/callnr.h>
27925 #include <sys/ioctl.h>
27926 #include <minix/sound.h>
27927 #if __minix_vmd
27928 #include "config.h"
27929 #endif
.Op 387 src/kernel/sb16_mixer.c
27930 #include "sb16.h"
27931
27932 #if ENABLE_SB_AUDIO
27933
27934 /* Function prototypes */
27935 FORWARD _PROTOTYPE( int mixer_init, (void));
27936 FORWARD _PROTOTYPE( int mixer_open, (message *m_ptr));
27937 FORWARD _PROTOTYPE( int mixer_close, (message *m_ptr));
27938 FORWARD _PROTOTYPE( int mixer_ioctl, (message *m_ptr));
27939 FORWARD _PROTOTYPE( int mixer_get, (int reg));
27940 FORWARD _PROTOTYPE( int get_set_volume, (message *m_ptr, int flag));
27941 FORWARD _PROTOTYPE( int get_set_input, (message *m_ptr, int flag, int channel));
27942 FORWARD _PROTOTYPE( int get_set_output, (message *m_ptr, int flag));
27943
27944 PRIVATE int mixer_avail = 0; /* Mixer exists? */
27945
27946
27947 /*=========================================================================*
27948 * mixer_task *
27949 *=========================================================================*/
27950 PUBLIC void mixer_task()
27951 {
27952 message mess;
27953 int err, caller, proc_nr;
27954
27955 /* Here is the main loop of the mixer task. It waits for a message, carries
27956 * it out, and sends a reply.
27957 */
27958 while (TRUE)
27959 {
27960 receive(ANY, &mess);
27961
27962 caller = mess.m_source;
27963 proc_nr = mess.PROC_NR;
27964
27965 switch (caller)
27966 {
27967 case HARDWARE:
27968 /* Leftover interrupt. */
27969 continue;
27970 case FS_PROC_NR:
27971 /* The only legitimate caller. */
27972 break;
27973 default:
27974 printf("sb16: got message from %dn", caller);
27975 continue;
27976 }
27977
27978 /* Now carry out the work. */
27979 switch(mess.m_type)
27980 {
27981 case DEV_OPEN: err = mixer_open(&mess);break;
27982 case DEV_CLOSE: err = mixer_close(&mess);break;
27983 case DEV_IOCTL: err = mixer_ioctl(&mess);break;
27984 default: err = EINVAL;break;
27985 }
27986
27987 /* Finally, prepare and send the reply message. */
27988 mess.m_type = TASK_REPLY;
27989 mess.REP_PROC_NR = proc_nr;
.Ep 388 src/kernel/sb16_mixer.c
27990
27991 mess.REP_STATUS = err; /* error code */
27992 send(caller, &mess); /* send reply to caller */
27993 }
27994 }
27997 /*=========================================================================*
27998 * mixer_open *
27999 *=========================================================================*/
28000 PRIVATE int mixer_open(m_ptr)
28001 message *m_ptr;
28002 {
28003
28004 #if SB_DEBUG
28005 printf("mixer_openn");
28006 #endif
28007
28008 /* try to detect the mixer type */
28009 if (!mixer_avail && !mixer_init() != OK) return EIO;
28010
28011 return OK;
28012 }
28015 /*=========================================================================*
28016 * mixer_close *
28017 *=========================================================================*/
28018 PRIVATE int mixer_close(m_ptr)
28019 message *m_ptr;
28020 {
28021
28022 #if SB_DEBUG
28023 printf("mixer_closen");
28024 #endif
28025
28026 return OK;
28027 }
28030 /*=========================================================================*
28031 * mixer_ioctl *
28032 *=========================================================================*/
28033 PRIVATE int mixer_ioctl(m_ptr)
28034 message *m_ptr;
28035 {
28036 int status;
28037
28038 #if SB_DEBUG
28039 printf("mixer: got ioctl %dn", m_ptr->REQUEST);
28040 #endif
28041
28042
28043 switch(m_ptr->REQUEST)
28044 {
28045 case MIXIOGETVOLUME: status = get_set_volume(m_ptr, 0);break;
28046 case MIXIOSETVOLUME: status = get_set_volume(m_ptr, 1);break;
28047 case MIXIOGETINPUTLEFT: status = get_set_input(m_ptr, 0, 0);break;
28048 case MIXIOGETINPUTRIGHT: status = get_set_input(m_ptr, 0, 1);break;
28049 case MIXIOGETOUTPUT: status = get_set_output(m_ptr, 0);break;
.Op 389 src/kernel/sb16_mixer.c
28050 case MIXIOSETINPUTLEFT: status = get_set_input(m_ptr, 1, 0);break;
28051 case MIXIOSETINPUTRIGHT: status = get_set_input(m_ptr, 1, 1);break;
28052 case MIXIOSETOUTPUT: status = get_set_output(m_ptr, 1);break;
28053 default: status = ENOTTY;
28054 }
28055
28056 return status;
28057 }
28060 /*=========================================================================*
28061 * mixer_init *
28062 *=========================================================================*/
28063 PRIVATE int mixer_init()
28064 {
28065 /* Try to detect the mixer by writing to MIXER_DAC_LEVEL if the
28066 * value written can be read back the mixer is there
28067 */
28068
28069 mixer_set(MIXER_DAC_LEVEL, 0x10); /* write something to it */
28070 if (mixer_get(MIXER_DAC_LEVEL) != 0x10)
28071 {
28072 printf("sb16: Mixer not detectedn");
28073 return EIO;
28074 }
28075
28076 /* Enable Automatic Gain Control */
28077 mixer_set(MIXER_AGC, 0x01);
28078
28079 #if SB_DEBUG
28080 printf("Mixer detectedn");
28081 #endif
28082
28083 mixer_avail = 1;
28084 return OK;
28085 }
28088 /*=========================================================================*
28089 * mixer_set *
28090 *=========================================================================*/
28091 PUBLIC int mixer_set(reg, data)
28092 int reg;
28093 int data;
28094 {
28095 int i;
28096
28097 out_byte(MIXER_REG, reg);
28098 for(i=0;i<100;i++);
28099 out_byte(MIXER_DATA, data);
28100
28101 return OK;
28102 }
28103
28104
28105 /*=========================================================================*
28106 * mixer_get *
28107 *=========================================================================*/
28108 PRIVATE int mixer_get(reg)
28109 int reg;
.Ep 390 src/kernel/sb16_mixer.c
28110 {
28111 int i;
28112
28113 out_byte(MIXER_REG, reg);
28114 for(i=0;i<100;i++);
28115 return (in_byte(MIXER_DATA) & 0xff);
28116 }
28117
28118
28119 /*=========================================================================*
28120 * get_set_volume *
28121 *=========================================================================*/
28122 PRIVATE int get_set_volume(m_ptr, flag)
28123 message *m_ptr;
28124 int flag; /* 0 = get, 1 = set */
28125 {
28126 phys_bytes user_phys;
28127 struct volume_level level;
28128 int cmd_left, cmd_right, shift, max_level;
28129
28130 user_phys = numap(m_ptr->PROC_NR, (vir_bytes) m_ptr->ADDRESS,
28131 sizeof(struct volume_level));
28132 if (user_phys == 0) return(EFAULT);
28133 phys_copy(user_phys, vir2phys(&level), (phys_bytes) sizeof(level));
28134
28135 shift = 3;
28136 max_level = 0x1F;
28137
28138 switch (level.device)
28139 {
28140 case Master: { cmd_left = MIXER_MASTER_LEFT;
28141 cmd_right = MIXER_MASTER_RIGHT;
28142 };break;
28143 case Dac: { cmd_left = MIXER_DAC_LEFT;
28144 cmd_right = MIXER_DAC_RIGHT;
28145 };break;
28146 case Fm: { cmd_left = MIXER_FM_LEFT;
28147 cmd_right = MIXER_FM_RIGHT;
28148 };break;
28149 case Cd: { cmd_left = MIXER_CD_LEFT;
28150 cmd_right = MIXER_CD_RIGHT;
28151 };break;
28152 case Line: { cmd_left = MIXER_LINE_LEFT;
28153 cmd_right = MIXER_LINE_RIGHT;
28154 };break;
28155 case Mic: { cmd_left = cmd_right = MIXER_MIC_LEVEL;
28156 };break;
28157 case Speaker: { cmd_left = cmd_right = MIXER_PC_LEVEL;
28158 shift = 6;
28159 max_level = 0x03;
28160 };break;
28161 case Treble: { cmd_left = MIXER_TREBLE_LEFT;
28162 cmd_right = MIXER_TREBLE_RIGHT;
28163 shift = 4;
28164 max_level = 0x0F;
28165 };break;
28166 case Bass: { cmd_left = MIXER_BASS_LEFT;
28167 cmd_right = MIXER_BASS_RIGHT;
28168 shift = 4;
28169 max_level = 0x0F;
.Op 391 src/kernel/sb16_mixer.c
28170 };break;
28171 default: return EINVAL;
28172 }
28173
28174 if (flag) /* Set volume level */
28175 {
28176 if (level.right < 0) level.right = 0;
28177 else if (level.right > max_level) level.right = max_level;
28178 if (level.left < 0) level.left = 0;
28179 else if (level.left > max_level) level.left = max_level;
28180
28181 mixer_set(cmd_right, (level.right << shift));
28182 mixer_set(cmd_left, (level.left << shift));
28183 }
28184 else /* Get volume level */
28185 {
28186 level.left = mixer_get(cmd_left);
28187 level.right = mixer_get(cmd_right);
28188
28189 level.left >>= shift;
28190 level.right >>= shift;
28191
28192 /* Copy back to user */
28193 phys_copy(vir2phys(&level), user_phys, (phys_bytes) sizeof(level));
28194 }
28195
28196 return OK;
28197 }
28200 /*=========================================================================*
28201 * get_set_input *
28202 *=========================================================================*/
28203 PRIVATE int get_set_input(m_ptr, flag, channel)
28204 message *m_ptr;
28205 int flag; /* 0 = get, 1 = set */
28206 int channel; /* 0 = left, 1 = right */
28207 {
28208 phys_bytes user_phys;
28209 struct inout_ctrl input;
28210 int input_cmd, input_mask, mask, del_mask, shift;
28211
28212 user_phys = numap(m_ptr->PROC_NR, (vir_bytes) m_ptr->ADDRESS,
28213 sizeof(struct inout_ctrl));
28214 if (user_phys == 0) return(EFAULT);
28215 phys_copy(user_phys, vir2phys(&input), (phys_bytes) sizeof(input));
28216
28217 input_cmd = (channel == 0 ? MIXER_IN_LEFT : MIXER_IN_RIGHT);
28218
28219 mask = mixer_get(input_cmd);
28220
28221 switch (input.device)
28222 {
28223 case Fm: { shift = 5;
28224 del_mask = 0x1F;
28225 };break;
28226 case Cd: { shift = 1;
28227 del_mask = 0x79;
28228 };break;
28229 case Line: { shift = 3;
.Ep 392 src/kernel/sb16_mixer.c
28230 del_mask = 0x67;
28231 };break;
28232 case Mic: { shift = 0;
28233 del_mask = 0x7E;
28234 };break;
28235 default: return EINVAL;
28236 }
28237
28238 if (flag) /* Set input */
28239 {
28240 input_mask =
28241 ((input.left == ON ? 1 : 0) << 1) | (input.right == ON ? 1 : 0);
28242
28243 if (shift > 0)
28244 input_mask <<= shift;
28245 else
28246 input_mask >>= 1;
28247
28248 mask &= del_mask;
28249 mask |= input_mask;
28250
28251 mixer_set(input_cmd, mask);
28252 }
28253 else /* Get input */
28254 {
28255 if (shift > 0)
28256 {
28257 input.left = ((mask >> (shift+1)) & 1 == 1 ? ON : OFF);
28258 input.right = ((mask >> shift) & 1 == 1 ? ON : OFF);
28259 }
28260 else
28261 input.left = ((mask & 1) == 1 ? ON : OFF);
28262