-
-
SPM
... can be obtained measuring the time of occurrence
of a sequence of accurately spaced interrupt requests, as obtained
connecting an ... of the comedi
driver daqboard2000.c, from which the code for the 'ioconf'
program was derived;
National Instruments < ...
-
real-time-cpp
... like
shell or console should work too.
The following command sequence will build for the
native `host` on a `* ... STM32F4DISCOVERY board commercially available from ST Microelectronics(R).
The program toggles the blue LED on `portd.15`.
Another ARM( ...
-
bmrm
... A.2.g. [ref 1]
4. smmmc-bmrm/
- Solves sequence segmentation and classification as a joint
problem (see ... L2N2_prLOQO, and
L2N2_LineSearch. L2N2_DaiFletcherPGM and L2N2_prLOQO solve a
quadratic program (QP) of size less than or equal to ...
-
LRR-Discoverr
... file tmhmm-2.0c/lib/TMHMM2.0.model)
This program requires no modification of the scripts to execute ... .fa/_NameToNumber.fa_dom_table.hmmscan.reduced.reindexed
Decodes sequence names from _NameToNumber.fa_dom_table.hmmscan.reduced ...
-
u-boot
... list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or ... i2c_init_board() routine in boards/xxx/board.c
is run early in the boot sequence.
CONFIG_SYS_I2C_BOARD_LATE_INIT
An alternative to ...
-
fusioninventory-agent-windows-installer
... source
project than has as goal to build the installer program of the FusionInventory
Agent and its tasks for Microsoft ... uniquely by a BuildID.
(Each architecture has its own BuildID sequence)
- Allows to execute the agent as a Windows Service, ...
-
tiny210-uboot
... list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or ... i2c_init_board() routine in boards/xxx/board.c
is run early in the boot sequence.
CONFIG_SYS_I2C_BOARD_LATE_INIT
An alternative to ...
-
agate
... compilable on any operating environment that supports
the standard ANSI C library.
By default the compilation system is setup to support ... get a new version of the program. The database filename is the same as the
sequence with ".database" appended. So ...
-
PowerOutageMonitor_SW
...
Arduino Power Outage Logger Copyright (C) 2012-2019 by Jack Christensen GNU GPL v3.0
This program is free software: ... to the next parameter. Hold SET to cancel the set sequence. Pressing (+) and (-) simultaneously while setting either the seconds or the ...
-
u-boot-beaglebone-freebsd
... list of people who contributed to this
# project.
#
# This program is free software; you can redistribute it and/or ... i2c_init_board() routine in boards/xxx/board.c
is run early in the boot sequence.
CONFIG_SYS_I2C_BOARD_LATE_INIT
An alternative to ...
-