-
-
fuzzy_finished1.rar
This is a program using the fuzzy logic.It has two inputs and one output.In order to keep the steady of the vehicles.If you can do some research on it, you can learn a lot about the fuzzy logic.
-
-
-
dsfds.rar
片上逻辑分析仪的设计On-chip logic analyzer design
-
rage.zip
逻辑内建自测试高故障覆盖率设计Logic BIST design of high fault coverage
-
hw1.zip
Using the schematic Design Entry Method, design a logic circuit that has two 2-bit inputs X and Y, a 1-bit input ... CinOrBin as the carry-in when the control input SubAddn is ‘1’ and the logic circuit behaves as a 2-bit subtracter ( X – Y – CinOrBin ) with ...
-
hw2.zip
Using the VHDL Entry Method, design a logic circuit that behaves as a 2-bit adder ( X + Y + CinOrBin ) with carry-in when the control input SubAddn is ‘0’ and behaves as a 2-bit subtracter ( X – Y – CinOrBin ) with borrow-in when the control input ...
-
hw4.zip
... , the binary coded decimal (BCD) equivalence of the binary representation of the state of eight switches. Use a function to perform the specified task. Assume that the 7-segment LEDs are turned on with logic “1”s (7-segment LEDs with common cathodes).
-
HCF4069UB.zip
... consists of six COS/MOS
inverter circuits. This device is intended for all
general purpose inverter applications where the
medium power TTL-drive and logic level
conversion capabilities of circuits such HCF4049B
HEX INVERTER/BUFFERS are not required.
-
PLC_programming.rar
THE STEP7 PROGRAMMING LANGUAGE
STEP 7 is the standard software package used for configuring and programming SIMATIC
programmable logic controllers. It is part of the SIMATIC industry software.
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
