-
-
CnC
... to set up your IDE to work properly if you want to use an atmega 8(Or just use a regular arduino board).
The code is currently in ... motor each to control the X, Y, Z axes. The UART of the atmega is connected to a MAX232A TTL to RS232 (serial) chip to ...
-
contr
... grow down (towards a lower address), more work will need to be done. I intend to add support for the AVR ATmega family of microprocessors.
Credits
-------
The method of using continuations in C was inspired by Dan Piponi's (sigfpe) [Continuations in C ...
-
roflcopter
... browser (preferably Chrome), and enjoy!
### tools/bootloader8
The SparkFun atmega wireless bootloader modified to have a stronger integrity ... program code residing in the upper section of the atmega flash, and is write protected with
appropriate fuses. ...
-
beagleboard_navstack
... System) to control a differentially steered robot with shaft encoders.
Directories:
bb_trainer : Embedded code for the ATMega 328p controlling base movement, shaft encoders, and power management.
beagle_board : Code, scripts, and ...
-
Praxisprojekt
... Schrittmotorprotokollen mittels Mikrocontroller
# Praxisprojekt #
## Übersetzen von Schrittmotorbefehlen
## Entwurf eines Hardwareübersetzers
### Hardware:
* ATMEGA 324 A
* STK500 Entwicklungsboard
* AVRISP mkII Programmer
* 4x20 LC-Display ...
-
-
templates
... GitHub repository:
https://github.com/alexforencich/templates
Included templates:
* xmega (C++, AVR xmega 8-bit microcontroller, avr-gcc toolchain)
* atmega (C++, AVR 8-bit microcontroller, avr-gcc toolchain)
* at91 (C/C++, AVR AT91 series ARM, arm-elf- ...
-
cade9
ATmega32 based arcade gaming platform: CADE9. Implemented game of pong and uses the open source cocoOS (cocoos.net) scheduler.
CADE9 is a project of task sch. and learning atmega uCs. And a small ping-pong game on it.
Just 4 fun!
Rohit Yadav
-
-
testmega
Test soft for ATmega node
testmega.c - > for testing and calibrating RFM22 with Atmega16.Master node connects directly to PC, others need RS232 adapters. Very crude, but works.Connection parameters: 115200, no parity check, 8 data bits, 1 stop bit, no ...
-