-
-
snarc
... top of the tallest component.
The on-board functions are:
ATMega 328p Micro-controller with 32KB Flash, 2KB SRAM and 512B ... the "D7 D8" header located between the ICSP header and ATMega. and the "AREF - A5" header located between the screw terminals ...
-
-
robotcode
... support library, and firmware for the various AVR boards
commusb: the atmega part of the Arduino UNO that talks to the Linux host. ... host. Translates to the serial link from the
8u2 t the atmega.
rl2: contains the Linux host program, using FLTK for a ...
-
Beat707-LE
... =0xFF
atmega328_20.bootloader.high_fuses=0xD2
atmega328_20.bootloader.extended_fuses=0x05
atmega328_20.bootloader.path=atmega
atmega328_20.bootloader.file=ATmegaBOOT_168_atmega328_20MHz.hex
atmega328_20.bootloader.unlock_bits=0x3F
atmega328_20.bootloader. ...
-
Autonomous-Soccer-Playing-Robot
... .com/wiki/
2. http://www.wikipedia.org/
3. http://www.e-yantra.org/home/
4. http://www.nex-robotics.com/
5. Spark V ATMEGA Hardware Manual
6. Spark V ATMEGA Software Manual
7. manual_xb_oem-rf-modules_802.15.4 for XBEE ...
-
HelioWatcher
... Thingiverse Page: http://www.thingiverse.com/thing:22423
Code
----
This is the embedded code that runs on the ATmega-based MightyBoard MotherBoard that controls the HelioWatcher. It was written in C using AVR Studio.
Datasheets
----------
These are ...
-
TankOS
... following platforms:
- Ubuntu: GNU make 4.0, GNU find 4.4.2, gcc 4.9.2, avr-gcc 4.8.1
- Windows & Cygwin: GNU make 4.1, GNU find 4.5.12, gcc 4.9.3, avr-gcc 4.8.0
- BeagleBone Black (Angstrom Linux): GNU make 3.81, GNU find 4.4.2, gcc 4.6.3
- ATmega 1284P
-
Wireless-Ocean-Printer
... .com/products/50) or sparkfun(http://www.sparkfun.com/products/10356) or seeed studios(http://www.seeedstudio.com/depot/seeeduino-v30-atmega-328p-p-669.html?cPath=132_133) for ~$30
++ Stackable arduino header kit. The wifly shield doesn't come with ...
-
avr_boot
SD card Bootloader for atmega processors
avr_boot
========
SD card Bootloader for atmega processors
-
Marble_Maze
...
+ Specialized Hardware
Installation Instructions
================
+ Install WINAVR
+ Install AVR Studio
+ Install MATLAB
References:
+ [ATMEGA Development Board] (http://www.nex-robotics.com/atmega640-development-board/atmega640-development-board ...
-
Go To English Version 超过100万源码资源，1000万源码文件免费下载
