Go To English Version 超过100万源码资源,1000万源码文件免费下载
  • OpenSegment ... ) (COM-11645)*](https://www.sparkfun.com/products/11645) OpenSegment is a ATmega328 based backpack for larger 7-segment displays. The ATmega receives data over digital interfaces (such as TWI, UART, SPI and buttons) and does all the PWM and upkeep of the ...
  • coffeemaker ... ) software. This basically turns the coffee maker into an USB device. Source code for the microcontroller can be found in the [atmega](atmega/) directory. Circuit schematics will be drawn and provided later. For now, look at [the USB-Servo](http://www. ...
  • avr_accel_osc An application for the ATmega 328 which reads to 2-axis accelerometers and converts that data to MIDI and OSC. avr_accel_osc ============= An application for the ATmega 328 which reads to 2-axis accelerometers and converts that data to MIDI and OSC.
  • ulader ... choosen, because of its ease of use, its low power consumption and because if the number of pins available. The atmega is used for the following: * power mangagement * check charging status * (indicate status??) * cut of power to all devices ...
  • acd Clone of Atmega Chip Detector by Nick Gammon
  • Wax_heater_tiny ... project to build a thermostatically controlled heater. It is designed to use a ATtiny microprocessor instead of the usual Arduino ATMEGA processors, so this will not work on a standard Arduino. It makes use of the TinyWireM library for I2C communication ...
  • amforth ... /gpl.html amforth is an interactive 16bit Forth for Atmel ATmega micro controllers. It does not need additional hard or ... completly on the controller (no cross-compiler). Porting to other Atmega types is easy. amforth uses the indirect threading model. ...
  • Sprinter ... a firmware for RAMPS and other reprap single-processor electronics setups. It supports printing from SD card, active heatbed control, and ATmega internal pullups. This work is licensed under the GNU GPL v3 or (at the user's discretion) any later version ...
  • ARMadaptor ... Due to be plugged into a Sanguinololu in place of the ATMEGA chip. RepRapPro Ltd Arduino DUE to Sanguinololu Adaptor Licence: GPL ... to a set of pins that pretend to be the Sanguinololu's ATMEGA chip. The four Eagle files you want are: due-adaptor. ...
  • IridiumControllerMEGA Iridium Modem Controller based on ATMEGA 2560 IridiumControllerMEGA ========= This is an EAGLE design project. Using it ---- Origin ---- This was written by @steamfire based on the [White Star Balloon](http://whitestarballoon.org) high altitude ...